(Fe,N-codoped carbon nanotube)/(Fe-based nanoparticle) nanohybrid derived from Fe-doped g-C3N4: A superior catalyst for oxygen reduction reaction

Rational design of Fe, N co-doped porous carbon derived from conjugated microporous polymer as an electrocatalytic platform for oxygen reduction reaction

Porous iron-nitrogen-doped carbons (FeNC) offer a great platform for construction of cathodic oxygen reduction reaction (ORR) catalysts in fuel cells. However, challenges still remain regarding with the collapse of carbon-skeleton during pyrolysis, uneven distribution of active sites and aggregation of metal atoms. In this work, we synthesized Fe, N co-doped conjugated microporous polymer (FeN-CMP) through a facile bottom-up strategy using 1,3,5-triethynylbenzene and iron-chelated 3,8-dibromo-1,10-phenanthroline as monomers, ensuring the uniform coordination of N with Fe element in network. Then, the resulting FeN-CMP was treated by pyrolysis without structural collapse to obtain porous FeNC electrocatalyst for ORR. The most active catalyst was fabricated under 900 °C, which exhibits remarkable ORR activity in alkaline medium with half-wave potential of 0.796 V (18 mV and 105 mV positive deviation from the commercial Pt/C catalyst and post-doping catalyst), high selectivity with nearly 4e- transfer process and excellent methanol tolerance. Our study first developed porous FeNC electrocatalysts derived from Fe, N-anchoring CMPs based on pre-functionalization of monomers, which exhibits great potential as an alternative to commercial Pt/C catalyst for ORR, and provides a feasible strategy of developing multi-atoms doping catalysts for energy storage and conversion as well as heterogeneous catalysis.

Developing In2S3 upon modified MgTiO3 anchored on nitrogen-doped CNT for sustainable sensing and removal of toxic insecticide clothianidin

Herein, the study introduces a novel bifunctional In2S3/MgTiO3/TiO2@N-CNT (IMTNC) nanocomposite, which is poised to revolutionize the detection and removal of clothianidin (CLD) from aquatic environments by synergistic adsorption and photodegradation. Confirmation of the material's synthesis was done using structural, optical, morphological, and chemical characterizations. An outstanding sensitivity of 2.168 μA/nM.cm2 with a linear range of 4-100 nM and a LOD of 0.04 nM, along with an exceptional elimination efficiency of 98.06 ± 0.84% for about 10 ppm CLD within 18 min was demonstrated by the IMTNC nanocomposite. Extensive studies were carried out to appraise the material's effectiveness in the presence of various interfering species, such as cations, anions, organic compounds, and different water matrices, and a comprehensive assessment of its stability throughout several cycles was made. Response Surface Methodology (RSM) study was used to determine the ideal removal conditions for improved performance. In addition, the catalytic performance in removing various other pollutants was also analyzed. Adding In2S3 and developing N-doped Carbon Nanotubes (N-CNT) increased conductivity and higher electrochemical sensing skills, improving charge transfer and increasing photocatalytic activity. This research underscores the potential of the IMTNC nanocomposite as a promising candidate for advanced environmental sensing and remediation applications.

Enhanced photocatalytic performance of CuS/O,N-CNT composite for solar-driven organic contaminant degradation

Herein, a hydrothermal etching approach was used to generate an innovative CuS/O,N-CNT composite. The hydrothermal etching of g-C3N4 led to the creation of O,N-CNT, with ethanol as the oxygen source. The SEM and TEM characterizations confirmed the formation of CNT, whereas the XPS analysis proved the doping of oxygen and nitrogen in the CNT matrix along with the incorporation of CuS. Under sun irradiation, the produced CuS/O,N-CNT showed outstanding photocatalytic efficiency, eliminating methyl orange and methylene blue dyes with 97.21% and 98.11% efficacy, respectively. Adding hydrothermally etched O,N-CNT increased light absorption and charge migration kinetics, as can be studied from the UV-DRS and PL analysis; hence, the observed improvements in light absorption and charge transfer pathways contributed to the CuS/O,N-CNT composite's enhanced photocatalytic activity, indicating its potential for efficient elimination of organic contaminants under solar irradiation. The catalyst demonstrated high reusability performance up to six cycles and significantly degraded other dyes. Scavenger analysis, along with VB-XPS and UV-DRS analysis, aid in developing a photocatalytic mechanism that confirms the participation of hydroxyl and superoxide radicals in the degradation process.

High-performance multifunctional porous iron Acetylacetonate/N, O-doped carbon nanospheres for electromagnetic wave absorption at 2-18 GHz and methyl orange absorption

Nowadays, multifunction is regarded as an advanced development direction of new-generation electromagnetic wave absorption (EMWA) materials to fulfill the ever-growing demands in complex environment and situation. Environmental pollution and electromagnetic pollution are all difficult problems for human beings all the time. Now, there is no multifunctional materials for collaborative treatment of environmental and electromagnetic pollution. Herein, We synthesized nanospheres with divinyl benzene (DVB) and N-[3-(dimethylamino)propyl]methacrylamide (DMAPMA), using a simple one-pot method. After calcination at 800 ℃ in N₂, porous N, O-doped porous carbon materials were prepared. By regulating the mole ratio of DVB and DMAPMA, the ratio was 5:1 reached excellent EMWA property. Remarkably, the introduction of iron acetylacetonate into the reaction of DVB and DMAPMA was effective in enhancing the absorption bandwidth to 8.00 GHz at a 3.74 mm thickness, which depended on the synergistic effects from dielectric and magnetic losses. Simultaneously, the Fe-doped carbon materials had a methyl orange adsorption capacity. The adsorption isotherm conformed to the Freundlich model. After methyl orange absorption, the EMWA property did not greatly change. Thus, this research paves the way for the creation of multifunctional materials to solve environmental pollution and electromagnetic pollution together.

Caffeine derived graphene-wrapped Fe3C nanoparticles entrapped in hierarchically porous FeNC nanosheets for boosting oxygen reduction reaction

It is a vital requirement to explore high-efficiency and stable electrocatalysts for oxygen reduction reaction (ORR) to further relieve energy depletion. However, it is a critical challenge to develop low cost and high-quality carbon-based catalysts. Herein, a caffeine chelation-triggered pyrolysis approach was developed to construct graphene-wrapped Fe₃C nanoparticles incorporated in hierarchically porous FeNC nanosheets (G-Fe₃C/FeNC). The present Fe salt and its content as well as the pyrolysis temperature were carefully investigated in the control groups. The G-Fe₃C/FeNC catalyst showed a more positive onset potential (E_onset = 1.09 V) and half-wave potential (E_1/2 = 0.88 V) in a 0.1 M KOH solution, which outperformed commercial Pt/C (E_1/2 = 0.83 V, E_onset = 0.95 V), showing the excellent catalytic performance for the ORR activity, coupled with remarkable stability (only 0.18 mV negative shift in E_1/2 after 2000 cycles). This work provides some valuable insights for developing advanced electrocatalysts for energy storage and conversion related research.

Engineering the electronic structure of high performance FeCo bimetallic cathode catalysts for microbial fuel cell application in treating wastewater

The development of high-performance, strong-durability and low-cost cathode catalysts toward oxygen reduction reaction (ORR) is of great significance for microbial fuel cells (MFCs). In this study, a series of bimetallic catalysts were synthesized by pyrolyzing a mixture of g-C₃N₄ and Fe, Co-tannic complex with various Fe/Co atomic ratios. The initial Fe/Co atomic ratio (3.5:0.5, 3:1, 2:2, 1:3) could regulate the electronic state, which effectively promoted the intrinsic electrocatalytic ORR activity. The alloy metal particles and metal-N_x sites presented on the catalyst surface. In addition, N-doped carbon interconnected network consisting of graphene-like and bamboo-like carbon nanotube structure derived from g-C₃N₄ provided more accessible active sites. The resultant Fe₃Co₁ catalyst calcined at 700 °C (Fe₃Co₁-700) exhibited high catalytic performance in neutral electrolyte with a half-wave potential of 0.661 V, exceeding that of the commercial Pt/C (0.6 V). As expected, the single chamber microbial fuel cell (SCMFC) with 1 mg/cm² loading of Fe₃Co₁-700 catalyst as the cathode catalyst afforded a maximum power density of 1425 mW/m², which was 10.5% higher than commercial Pt/C catalyst with the same loading (1290 mW/m²) and comparable to the Pt/C catalyst with 2.5 times higher loading ( 1430 mW/m²). Additionally, the Fe₃Co₁-700 also displayed better long-term stability over 1100 h than the Pt/C. This work provides an effective strategy for regulating the surface electronic state in the bimetallic electro-catalyst.

Polyhedron shaped palladium nanostructures embedded on MoO2/PANI-g-C3N4 as high performance and durable electrocatalyst for oxygen reduction reaction

A hybrid catalyst support anchoring a noble metal catalyst could be a promising material for building interfacial bonding between metallic nanostructures and polymer functionalized carbon supports to improve the kinetics of oxygen reduction reaction (ORR). This study successfully prepared a polyhedron nanostructured Pd and MoO2-embedded polyaniline-functionalized graphitized carbon nitride (PANI-g-C3N4) surface using a chemical reduction method. The Pd-Mo/PANI-g-C3N4 achieved an ORR activity of 0.27 mA µg-1 and 1.14 mA cm-2 at 0.85 V, which were 4.5 times higher than those of commercial 20% Pt/C catalyst (0.06 mA µg-1 and 0.14 mA cm-2). In addition, the Pd-Mo/PANI-g-C3N4 retained ∼ 77.5% of its initial mass activity after 10,000 cycles, with only 30 mV half-wave potential reduction. Further, the engineered potential active sites in the catalyst material verified the significant improvement in the ORR activity of the catalyst with increased life-time, and theoretical calculations revealed that the synergistic effect of the catalytic components enhanced the ORR kinetics of the active sites.

Recent Advances in g-C3 N4 -Based Photocatalysts for Pollutant Degradation and Bacterial Disinfection: Design Strategies, Mechanisms, and Applications

Emerging photocatalytic technology promises to provide an effective solution to the global energy crisis and environmental pollution. Graphite carbon nitride (g-C₃ N₄ ) has gained extensive attention in the scientific community due to its excellent physical and chemical properties, attractive electronic band structure, and low cost. In this paper, research progress in design strategies for g-C₃ N₄ -based photocatalysts in the past five years is reviewed from the perspectives of nanostructure construction, element doping, and heterostructure construction. To clarify the relationship between application requirements and structural design, variations in the morphology, electronic energy band structure, light absorption capacity, as well as interfacial charge transfer caused by various modification strategies are discussed in detail. The recent applications of g-C₃ N₄ -based photocatalysts for pollutant degradation and bacterial disinfection are reviewed, as well as the antimicrobial activity and degradation mechanisms. Finally, current challenges and future development directions for the practical application of g-C₃ N₄ -based photocatalysts are tentatively discussed.

Catalytic degradation of acetaminophen by Fe and N Co-doped multi-walled carbon nanotubes

An Fe and N co-doped carbon nanotube (CNT) (Fe/N-CNT) was successfully prepared using a simple hydrothermal method. CNT, Fe doped CNTs (Fe-CNT), N doped CNTs (N-CNT), and Fe/N-CNT were characterized using scanning electron microscopy, X-ray photoelectron spectroscopy, Raman spectroscopy, and zeta potential analysis. The catalytic activities of the materials were investigated via pharmaceutical (acetaminophen, ACT) degradation using persulfate (PS). The ACT removal rate was in the order: Fe-CNT > N-CNT > Fe-CNT > CNT, for 30 min with 10 mg/L ACT, 0.05 g/L materials, and 0.08 mM PS. The doped N existed as pyridinic-N, pyrrolic-N/N-Fe, graphitic-N, and oxidized-N, while the doped Fe existed as Fe-N, FeO/Fe₃O₄, and Fe₂O₃/FeOOH at the edge. The rates of ACT removal and PS decomposition were well correlated with pyrrolic-N/N-Fe. The ACT removal in the Fe/N-CNT + PS system was as high as >98.4% and was not significantly affected by the initial pH of 2.0-8.2 and ten consecutive uses. However, natural organic matter (NOM) inhibited ACT removal by the accumulation on Fe/N-CNT. The results of ACT removal in the presence of radical scavengers, PS decomposition, and cyclic voltammetry showed that the ACT removal was dominantly attributed to a non-radical pathway with the accelerated electron transfer from ACT to PS through the Fe/N-CNT. The results in this study strongly suggest that the Fe/N-CNT + PS system is an excellent process for the degradation of refractory organic pollutants in various water matrices with improved performance and stability attributed by non-radical pathway.

Efficient oxygen reduction electrocatalyst derived from facile Fe,N-surface treatment of carbon black

The development of nonprecious metal-based electrocatalysts for oxygen reduction reaction (ORR) is a central task in renewable electrochemical energy conversion and storage technologies. Iron-nitrogen doped carbon-based (Fe-N/C) materials are promising alternatives to Pt-based ORR electrocatalysts. Owing to large specific surface area and outstanding electrical conductivity, carbon black is an inborn support for electrocatalysts. Unfortunately, the direct incorporation of Fe-N_x moieties onto the surface of carbon black has not been realized to date. Herein, Fe-N_x moieties are directly incorporated onto the surface of carbon black through surface modification and the following Fe and N co-doping. The obtained Fe and N co-doped carbon back (Fe-N/CB) catalyst has very large specific surface area and abundant accessible Fe-N_x moieties. As a result, Fe-N/CB electrocatalyst exhibits a more positive half-wave potential (0.86 V) than Pt/C. The Fe-N/CB catalyst also displays better stability and methanol resistance than Pt/C. The Zn-air battery with Fe-N/CB as cathodic catalyst shows a maximum power density of 68 mW cm^-2 and a specific capacity of 676 mAh g_Zn^-1. Our finding provides a convenient and low-cost approach to fabricating efficient M-N/C-based catalysts and will be helpful to the development of renewable electrochemical energy conversion and storage technologies.

Multi-role graphitic carbon nitride-derived highly porous iron/nitrogen co-doped carbon nanosheets for highly efficient oxygen reduction catalyst

Pyrolyzing precursors containing iron, nitrogen and carbon elements is a commonly used process for synthesizing FeNC catalysts for oxygen reduction reaction (ORR). Generally, aggregation of iron-based species is prone to occur because of a lack of chemical bonds between iron-based species and carbon matrix and synthesizing highly porous FeNC catalysts is difficult because carbon skeleton is prone to collapse during pyrolysis. Herein, highly porous FeNC catalysts with fine iron-based species are synthesized by selecting glucose as carbon source, FeCl₃ as iron source, and urea-derived g-C₃N₄ as nitrogen source, iron anchoring and stabilizing species, and pore-forming template. The multi-role g-C₃N₄-derived catalyst synthesized at 1100 °C (FeNC1100) has fine iron-based species, large specific surface area (737 m² g^-1), and extremely high pore volume (2.66 cm³ g^-1). Accordingly, FeNC1100 shows a larger half-wave potential (E_1/2 = 0.894 V), a higher stability (ΔE_1/2 = 6 mV) after 10,000 potential cycles in alkaline media, and a higher peak power density (P = 152 mW cm^-2) when employed as ORR catalyst of zinc-air battery, which are all superior to those of the commercial Pt/C catalyst (E_1/2 = 0.864 V, ΔE_1/2 = 30 mV, P = 134 mW cm^-2). The present work brings a new method for synthesizing highly porous FeNC catalysts decorated with fine active sites for ORR.

Design of Fe,N co-doped multi-walled carbon nanotubes for efficient oxygen reduction

Fe and N co-doped multi-walled carbon nanotubes (Fe,N-MWCNTs) are designed and fabricated to efficiently catalyze the oxygen reduction reaction (ORR).