Preparation of CoS2 supported flower-like NiFe layered double hydroxides nanospheres for high-performance supercapacitors

Sea Urchin-Like NiCo-LDH Hollow Spheres Anchored on 3D Graphene Aerogel for High-Performance Supercapacitors

To enhance the inherent poor conductivity and low cycling stability of dimetallic layered double hydroxides (LDHs) materials, designing a synergistic effect between EDLC capacitors and pseudocapacitors is an efficient strategy. In this paper, we utilized a solvothermal technique employing Co-glycerate as a precursor to prepare sea urchin-like NiCo-LDH hollow spheres anchored on a 3D graphene aerogel. The unique morphology of these hollow microspheres significantly expand the specific surface area and exposes more active sites, while reducing the volume changes of materials during long-term charging and discharging processes. The 3D graphene aerogel serves as a conductive skeleton, improving the material's electrical conductivity and buffering high current. The sea urchin-like NiCo-LDH hollow spheres anchored on 3D graphene aerogel (H-NiCo-LDH@GA) has a specific surface area of 51 m2 g-1 and the ID/IG value is 1.02. The H-NiCo-LDH@GA demonstrate a significant specific capacitance of 236.8 mAh g-1 at 1 A g-1, with a remarkable capacity retention rate of 63.1 % even at 20 A g-1. Even after 8000 cycles at 10 A g-1, the capacity retention still remains at 96.3 %, presenting excellent cycling stability.

Controlled establishment of advanced local high-entropy NiCoMnFe-based layered double hydroxide for zinc batteries and low-temperature supercapacitors

The development of high-performance electrodes is essential for improving the charge storage performance of rechargeable devices. In this study, local high-entropy C, N co-doped NiCoMnFe-based layered double hydroxide (C/N-NiCoMnFe-LDH, C/N-NCMF) were designed using a novel method. Multi-component synergistic effects can dramatically modulate the surface electron density, crystalline structure, and band-gap of the electrode. Thus, the electrical conductivity, electron transfer, and affinity for the electrolyte can be optimized. Additionally, the C/N-NCMF yielded a high specific capacitance (1454F·g-1) at 1 A·g-1. The electrode also exhibited excellent cycling stability, with 62 % capacitance retention after 5000 cycles. Moreover, the assembled Zn||C/N-NCMF battery and the C/N-NCMF//AC hybrid supercapacitor yielded excellent energy densities of 63.1 and 35.4 Wh·kg-1 at power densities of 1000 and 825 W·kg-1, and superior cycling performance with 69 % and 88.7 % capacitance retention after 1000 and 30,000 cycles, respectively. Furthermore, the electrode maintained high electrochemical activity and stability and ensured high energy density, power density, and cycling stability of the rechargeable devices even at a low temperature (-20 °C). This study paves a new pathway for regulating the electrochemical performance of LDH-based electrodes.

M-Ni-Co MOF (M=Zn, Fe, Mn) for high-performance supercapacitors by adjusting its morphology

Metal-organic frameworks (MOF) have been wildly synthesised and studied as electrode materials for supercapacitors, and bimetallic MOF of Ni and Co has been broadly studied to enhance both specific capacitance and stability of supercapacitors. Herein, a best performance (about 320 F/g) of Ni-Co bimetallic MOF was found in a uniform preparation condition by adjusting the ratio of Ni to Co. Then tiny third metal ion was introduced, and we found that the morphology of material has a significant change on the original basis. Furthermore, certain ions (Zn, Fe, Mn) introduced make a huge improvement in capacitance based on Ni-Co MOF of 320 F/g. The result shows that Zn-Ni-Co MOF, Fe-Ni-Co MOF and Mn-Ni-Co MOF perform specific capacitance of 1135 F/g, 870 F/g and 760F/g at 1 A/g, respectively. Meanwhile, the asymmetric supercapacitor (ASC) was constructed by Zn-Ni-Co MOF as positive electrode and active carbon (AC) as negative electrode. The Zn-Ni-Co MOF//AC ASC possesses a energy density of 58 Wh/kg at a power density of 775 W/kg. This research provides a new methods to regulate the morphology of MOF and a novel viewpoint for assembling high-performance, low-price, and eco-friendly green energy storage devices.

Progress in layered double hydroxides (LDHs): Synthesis and application in adsorption, catalysis and photoreduction

Layered double hydroxides (LDHs), also known as anionic clays, have attracted significant attention in energy and environmental applications due to their exceptional physicochemical properties. These materials possess a unique structure with surface hydroxyl groups, tunable properties, and high stability, making them highly desirable. In this review, the synthesis and functionalization of LDHs have been explored including co-precipitation and hydrothermal methods. Furthermore, extensive research on LDH application in toxic pollutant removal has shown that modifying or functionalizing LDHs using materials such as activated carbon, polymers, and inorganics is crucial for achieving efficient pollutant adsorption, improved cyclic performance, as well as effective catalytic oxidation of organics and photoreduction. This study offers a comprehensive overview of the progress made in the field of LDHs and LDH-based composites for water and wastewater treatment. It critically discusses and explains both direct and indirect synthesis and modification techniques, highlighting their advantages and disadvantages. Additionally, this review critically discusses and explains the potential of LDH-based composites as absorbents. Importantly, it focuses on the capability of LDH and LDH-based composites in heterogeneous catalysis, including the Fenton reaction, Fenton-like reactions, photocatalysis, and photoreduction, for the removal of organic dyes, organic micropollutants, and heavy metals. The mechanisms involved in pollutant removal, such as adsorption, electrostatic interaction, complexation, and degradation, are thoroughly explained. Finally, this study outlines future research directions in the field.

NiCoSe4nanoparticles derived from nickel-cobalt Prussian blue analogues on N-doped reduced graphene oxide for high-performance asymmetric supercapacitors

Synthesis of NiHCCo precursors via simple co-precipitation and nickel-cobalt tetraselenide composites grown on nitrogen-doped reduced graphene oxide (NiCoSe₄/N-rGO) were fabricated using solvothermal method. The introduction of N-rGO used as a template effectively prevented agglomeration of NiCoSe₄nanoparticles and provided more active sites, which greatly increased the electrochemical and electrical conductivity for NiCoSe₄/N-rGO. NiCoSe₄/N-rGO-20 presents a remarkably elevated specific capacity of 120 mA h g^-1under current density of 1 A g^-1. NiCoSe₄/N-rGO-20 demonstrates an excellent cycle life and achieves a remarkable 83% retention rate over 3000 cycles with 10 A g^-1. NiCoSe₄/N-rGO-20//N-rGO asymmetric supercapacitor was constructed based on the NiCoSe₄/N-rGO-20 as an anode, N-rGO as cathode by using 2 mol l^-1KOH as an electrolyte. NiCoSe₄/N-rGO-20//N-rGO ASC demonstrates an ultra-big energy density of 14 Wh kg^-1and good circulation stability in the power density of 902 W kg^-1. It is doubled in comparison to the NiCoSe₄/N-rGO-20//rGO asymmetric supercapacitor (7 Wh kg^-1). The NiCoSe₄/N-rGO-20//N-rGO ASC capacity retention is still up to 93% over 5000 cycles (5 A g^-1). The results reveal that this device would be a prospective cathode material of supercapacitors in actual applications.

Nano-dendrite structured cobalt phosphide based hybrid supercapacitor with high energy storage and cycling stability

The supercapacitors possessing high energy storage and long serving period have strategic significance to solve the energy crisis issues. Herein, fluffy nano-dendrite structured cobalt phosphide (CoP) is grown on carbon cloth through simple hydrothermal and electrodeposition treatments (CoP/C-HE). Benefit from its excellent electrical conductivity and special structure, CoP/C-HE manifests a high specific capacity of 461.4 C g^-1at 1 A g^-1. Meanwhile, the capacity retention remains 92.8% over 10 000 cycles at 5 A g^-1, proving the superior cycling stability. The phase conversion of Co₂P during the activation process also contributes to the improved performance. The assembled two-electrode asymmetric supercapacitor demonstrates excellent performance in terms of energy density (42.4 W h kg^-1at a power density of 800.0 W kg^-1) and cycling stability (86.3% retention over 5000 cycles at 5 A g^-1), which is superior to many reported cobalt-based supercapacitors. Our work promotes the potential of transition metal phosphides for the applications in supercapacitors.

Core-shell shaped Ni2CoHCF@PPy microspheres from prussian blue analogues for high performance asymmetric supercapacitors

Recently, prussian blue analogues (PBAs), as the most classical class of metal-organic frameworks, have been widely studied by scientists. Nevertheless, the inferior conductivity of PBAs restricts the application in supercapacitors. In this work, nickel cobalt hexacyanoferrate (Ni₂CoHCF) had been produced via a simple co-precipitation approach and coated with polypyrrole on its surface. The conductivity of PBAs was improved by the polypyrrole coating. The Ni₂CoHCF@PPy-400 microspheres were demonstrated to the outstanding specific capacity of 82 mAh g^-1at 1 A g^-1. After 3000 cycles, the Ni₂CoHCF@PPy-400 microspheres had a long cycle life and 86% specific capacity retention rate at 5 A g^-1. Additionally, it was coupled with activated carbon to build high performance asymmetric supercapacitor (Ni₂CoHCF@PPy-400//AC), which displayed a high energy density of 21.7 Wh kg^-1at the power density of 888 W kg^-1and good cycle stability after 5000 cycles (a capacity retention rate of 85.2%). What is more, the results reveal that the Ni₂CoHCF@PPy-400 microspheresare a prospective candidate for exceptional energy storage devices.

Facile Synthesis of Coral Reef-Like ZnO/CoS2 Nanostructure on Nickel Foam as an Advanced Electrode Material for High-Performance Supercapacitors

Nanocomposite electrodes receive much attention because of their excellent energy storage nature. Electrodes for supercapacitors have come a major source of interest. In this pursuit, the current work elucidates binder-free coral reefs resembling ZnO/CoS2 nanoarchitectures synthesized on the surface of Ni foams employing the cost-effective hydrothermal route. The Zno/CoS2 nanocomposite demonstrated excellent battery-type behavior, which can be employed for supercapcitor application. Various analyses were carried out in the current study, such as X-ray diffraction and high-resolution scanning electron microscopy, which allowed defining the crystalline nature and morphology of surface with ZnO/CoS2 nanoarchitectures. Electrochemical measures such as cyclic voltammetry, galvanostatic charge discharge, and potentiostatic impedance spectroscopy confirmed the battery-type behavior of the material. The synthesized precursors of binder-free ZnO/CoS2 nanostructures depicted an excellent specific capacity of 400.25 C·g−1 at 1 A·g−1, with a predominant cycling capacity of 88. 2% and retention holding of 68% at 10 A·g−1 and 2 A·g−1, even after 4000 cycles, representing an improvement compared to the pristine ZnO and CoS2 electroactive materials. Therefore, the electrochemical and morphological analyses suggest the excellent behavior of the ZnO/CoS2 nanoarchitectures, making them promising for supercapacitors.