Electrochemical hydrogen and oxygen evolution reactions from a cobalt-porphyrin-based covalent organic polymer

Synergistic reductive catalytic effects of an organic and inorganic hybrid covalent organic framework for hydrogen fuel production

Electrocatalytic hydrogen generation in alkaline medium has become widely used in a variety of sectors. However, the possibility for additional performance improvement is hampered by slow kinetics. Because of this restriction, careful control over processes such as water dissociation, hydroxyl desorption and hydrogen recombination is required. Covalent organic frameworks (COFs) based on porphyrin and polyoxometalates (POMs) show encouraging electrocatalytic performance, offering a viable route for effective and sustainable hydrogen generation. Their specific architectures lead to increased electrocatalytic activity, which makes them excellent choices for developing water electrolysis as a clean energy conversion method in the alkaline medium. In this regard, TTris@ZnPor and Lindqvist POM were coordinated to create a new eco-friendly and highly active covalent organic framework (TP@VL-COF). In order to describe TP@VL-COF, extensive structural and morphological investigations were carried out through FTIR, 1H NMR, elemental analysis, SEM, fluorescence, UV-visible, PXRD, CV, N2-adsorption isotherm, TGA and DSC analyses. In an alkaline medium, the electrocatalytic capability of 20%C/Pt, TTris@ZnPor, Lindqvist POM and TP@VL-COF was explored and compared for the hydrogen evolution reaction (HER). The TP@VL-COF showed the best catalytic efficiency for HER in an alkaline electrolyte, requiring just a 75 mV overpotential to drive 10 mA cm-2 and outperforming 20%C/Pt, TTris@ZnPor, Lindqvist POM and other reported catalysts. The Tafel slope value also indicates faster kinetics for TP@VL-COF (114 mV dec-1) than for 20%C/Pt (182 mV dec-1) TTris@ZnPor (116 mV dec-1) and Lindqvist POM (125 mV dec-1).

Flexible Hydrazone-Linked Metal-Covalent Organic Frameworks with Copper Clusters for Efficient Electrocatalytic Oxygen Evolution Reaction

Despite the challenges associated with the synthesis of flexible metal-covalent organic frameworks (MCOFs), these offer the unique advantage of maximizing the atomic utilization efficiency. However, the construction of flexible MCOFs with flexible building units or linkages has rarely been reported. In this study, novel flexible MCOFs are constructed using flexible building blocks and copper clusters with hydrazone linkages. The heterometallic frameworks (Cu, Co) are prepared through the hydrazone linkage coordination method and evaluated as catalysts for the oxygen evolution reaction (OER). Owing to the spatial separation and functional cooperation of the heterometallic MCOF catalysts, the as-synthesized MCOFs exhibited outstanding catalytic activities with an overpotential of 268.8 mV at 10 mA cm-2 for the OER in 1 M KOH, which is superior to those of the reported covalent organic frameworks (COFs)-based OER catalysts. Theoretical calculations further elucidated the synergistic effect of heterometallic active sites within the linkages and frameworks, contributing to the enhanced OER activity. This study thus introduces a novel approach to the fundamental design of flexible MCOF catalysts for the OER, emphasizing their enhanced atomic utilization efficiency.

Acenaphthenediimine complex-bridged porphyrin porous organic polymer with enriched active sites as a robust water splitting electrocatalyst

To realize efficient water splitting, a highly promising hydrogen evolution reaction (HER) electrocatalyst is needed for the generation of hydrogen. Herein, we demonstrate a novel acenaphthenediimine complex-bridged porphyrin porous organic polymer (NiTAPP-NiACQ) with enriched active metal sites and hierarchical pores. The as-prepared NiTAPP-NiACQ exhibits good long-term durability and remarkable HER performance in 1.0 M KOH with a low overpotential of 117 mV at 10 mA cm-2, which is comparable to many previously reported electrocatalytic HER systems. Furthermore, a simple water-alkali electrolyzer using NiTAPP-NiACQ as the cathode requires a small cell voltage of 1.59 V to deliver a current density of 10 mA cm-2 at room temperature, along with outstanding durability. NiTAPP-NiACQ features not only a metal ion as the catalytic active center in the porphyrin core but also metal ion coordination on the anthraquinone component to promote HER performance, enabling multiple metal ions as the electrocatalytic active sites for the HER reaction. The excellent HER activity of NiTAPP-NiACQ is ascribed to a combination of mechanisms. These findings highlight the viability of porphyrin-derived porous organic polymers in energy conversion processes.

Bifunctional porphyrin-based metal-organic polymers for electrochemical water splitting

Electrochemical water splitting offers the potential for environmentally friendly hydrogen and oxygen gas generation. Here, we present the synthesis, characterization, and electrochemical analyses of four organic polymers where metalloporphyrins are the active center nodes. These materials were obtained from the polymerization reaction of poly(p-phenylene terephtalamide) (PPTA) with the respective amino-functionalized metalloporphyrins, where M = Fe, 1; Co, 2; Ni, 3; Cu, 4. Scanning and transmission electron microscopy images (SEM and TEM) show that these polymers exhibit a layer-type morphology, which is attributed to hydrogen bonding and π-π stacking between the metalloporphyrin nodes. The synthesized materials were characterized by X-ray photoelectron spectroscopy (XPS), X-ray powder diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), UV-Vis spectroscopy, and Fourier-transform infrared spectroscopy (FT-IR). Among the materials studied, the cobalt-based polymer, 2, demonstrates a bifunctional electrocatalytic activity for oxygen (OER) and hydrogen (HER) evolution reactions with overpotentials (η10) of 337 mV and 435 mV, respectively. The Fe, 1, and Ni, 2, polymers are less active for HER with maximum current densities (jmax) of 12.6 and 19.1 mA cm-2 and η10 678 mV, 644 mV. Polymer 2 achieves a jmax of 37.7 mA cm-2 for HER and 133 mA cm-2 for OER. The copper-based material, 4, on the other hand, shows selectivity towards HER with an overpotential (η) of 436 mV and a maximum current density (j) of 45.5 mA cm-2. The bifunctional electrocatalytic performance was tested in the overall water-splitting setup, where polymer 2 requires a cell voltage of 1.64 V at 10 mA cm-2. This work presents a novel approach to heterogenized molecular systems, providing materials with exceptional structural characteristics and enhanced electrocatalytic capabilities.

Boosted hydrogen evolution reaction for a nitrogen-rich azo-bridged metallated porphyrin network

The potential of porous organic polymers (POPs) toward electrocatalytic water splitting have attracted considerable scientific attention, due to their high specific surface areas, superlative porosity and diverse electronic structures; yet it remains challenging. Herein, we report a facile synthesized novel nitrogen-rich azo-bridged metallated porphyrin POP (CoTAPP-CoTNPP) for improving the hydrogen evolution reaction (HER) activity. The incorporation of the cobalt porphyrins and the azo groups endows CoTAPP-CoTNPP with effective charge transfer efficiency and large π-conjugated porous frameworks, thus enhancing the HER performance. Origins of the excellent HER performance of the material are evaluated using a series of structural and electrochemical measurements. Remarkably, CoTAPP-CoTNPP exhibits low overpotentials of 103 and 170 mV to reach 10 mA cm-2 in acidic and alkaline media, respectively, outperforming many previously reported HER electrocatalysts. These results demonstrate the enormous potential of the as-prepared azo-linked porphyrin POP for electrocatalytic water splitting.

Efficient oxygen evolution reaction from iron-molybdenum nitride/molybdenum oxide heterostructured composites

Integrating various active sites into a multi-component system might significantly enhance the oxygen evolution reaction (OER) performance. Herein, the as-prepared iron-molybdenum nitride/molybdenum oxide (Fe-Mo5N6/MoO3-550) composite electrocatalyst under optimum conditions demonstrates excellent electrocatalytic performance toward OER and reaches current densities of 10 and 20 mA cm-2 at overpotentials of 201 and 216 mV, respectively. The OER performance of Fe-Mo5N6/MoO3-550 exceeds that of most previously reported electrocatalytic systems. The significant improvement in the OER performance is ascribed to a combination of mechanisms. The strong electronic interactions among the Fe, Mo5N6 and MoO3 species can accelerate the OER reaction kinetics, which contributes to the OER performance. This work provides new insights into the construction of efficient electrocatalytic materials with inexpensive metals.

Efficient hydrogen generation of a cobalt porphyrin-bridged covalent triazine polymer

Hydrogen production obtained by electrocatalytic water splitting exhibits great promise in addressing both energy shortage and environmental contamination. Herein, we prepared a novel cobalt porphyrin (CoTAPP)-bridged covalent triazine polymer (CoTAPPCC) by covalently linking CoTAPP with cyanuric chloride (CC) for catalytic hydrogen evolution reaction (HER). Both experimental techniques and density functional theory (DFT) calculations were used to evaluate the correlation of HER activity with molecular structures. Benefiting from the strong electronic interactions between the CC unit and the CoTAPP moiety, a standard current density at 10 mA cm^-2 is obtained for CoTAPPCC with a low overpotential of 150 mV in acid, which is comparable to or better than the best records reported previously. Additionally, a competitive HER activity in basic medium is obtained for CoTAPPCC. The strategy reported herein is valuable for designing and developing porphyrin-based efficient HER electrocatalysts.

Interface and electronic structure regulation of Mo-doped NiSe2-CoSe2 heterostructure aerogel for efficient overall water splitting

Transition metal selenides (TMSes) with cubic pyrite-type crystal structure have been widely explored as electrocatalysts for oxygen evolution reaction (OER), but the insufficient hydrogen evolution reaction (HER) performance hinders the application of overall water splitting. Herein, we designed and prepared a Mo doped NiSe₂-CoSe₂ heterostructure aerogel as bifunctional electrocatalyst via facile spontaneous gelation and selenium vapor deposition. The active sites on the heterointerface possessed desirable Gibbs free energy of hydrogen adsorption, leading to better HER performance than single NiSe₂ or CoSe₂. Moreover, systematically experimental research and density functional theory (DFT) calculations revealed that fine regulated Mo doping improved the electropositivity of heterostructure, promoting the nucleophilic adsorption of water molecule. Benefit from those improvements, the optimal Mo doped NiSe₂-CoSe₂ aerogel exhibited an extremely low overpotential of 57 mV at the current density of 10 mA·cm^-2 for HER with a small Tafel slope value of 38 mV·dec^-1. Meanwhile, Mo doping provided higher electron transfer efficiency and better adsorptive property toward reaction intermediate in anodic reaction, resulting in low overpotential of 270 mV at the current density of 100 mA·cm^-2 for OER with good electrocatalytic stability. This work provides an anticipated perspective of rational combination of metal doping and heterostructure for advanced electrocatalysts.

One-pot synthesis of magnetic sulfonated covalent organic polymer for extraction of protoberberine alkaloids in herbs and human plasma

A novel magnetic sulfonated covalent organic polymer was prepared for magnetic solid-phase extraction of protoberberine alkaloids. The magnetic sulfonated covalent organic polymer was rapidly synthesized under mild conditions. The physicochemical properties of the prepared materials were characterized by Fourier-transform infrared spectrometry, transmission electron microscopy, and X-ray photoelectron spectroscopy. Several extraction parameters were systematically investigated, including desorption time, pH of sample solution, acetonitrile content, acetic acid content in the eluent, extraction time, and sample volume. By coupling magnetic solid-phase extraction and high-performance liquid chromatography, an efficient and sensitive method for the extraction and determination of protoberberine alkaloids in complex samples was developed. The proposed method showed great linearity (r > 0.9989), low limits of detection (0.2-0.3 ng/ml), and high precision (relative standard deviations ≤ 5.74%). The proposed method was further applied to the analysis of protoberberine alkaloids in Cortex phellodendri and human plasma samples. The recoveries were 91.50%-110.31% with relative standard deviations less than 6.63% in Cortex phellodendri and 96.12%-111.20% with relative standard deviations lower than 5.56% in plasma samples.

The pH Influence on the Water-Splitting Electrocatalytic Activity of Graphite Electrodes Modified with Symmetrically Substituted Metalloporphyrins

Hydrogen, considered to be an alternative fuel to traditional fossil fuels, can be generated by splitting water molecules into hydrogen and oxygen via the use of electrical energy, in a process whose efficiency depends directly on the employed catalytic material. The current study takes part in the relentless search for suitable and low-cost catalysts relevant to the water-splitting field by investigating the electrocatalytic properties of the O₂ and H₂ evolution reactions (OER and HER) of two metalloporphyrins: Zn(II) 5,10,15,20-tetrakis(4-pyridyl)-porphyrin and Co(II) 5,10,15,20-tetrakis(3-hydroxyphenyl)-porphyrin. The TEM/STEM characterisation of the porphyrin samples obtained using different organic solvents revealed several types of self-assembled aggregates. The HER and OER experiments performed on porphyrin-modified graphite electrodes in media with different pH values revealed the most electrocatalytically active specimens. For the OER, this specimen was the electrode manufactured with one layer of Co-porphyrin applied from dimethylsulfoxide, exhibiting an overpotential of 0.51 V at i = 10 mA/cm² and a Tafel slope of 0.27 V/dec. For the HER, it was the sample obtained by drop casting one layer of Zn-porphyrin from N,N-dimethylformamide that displayed a HER overpotential of 0.52 V at i = -10 mA/cm² and a Tafel slope of 0.15 V/dec.

A New Supramolecular Tetraruthenated Cobalt (II) Porphyrazine Displaying Outstanding Electrocatalytical Performance in Oxygen Evolution Reaction

A new supramolecular electrocatalyst for Oxygen Evolution Reaction (OER) was synthesized from a central multibridging cobalt tetrapyridylporphyrazine (CoTPyPz) species by attaching four [Ru(bpy)₂Cl]⁺ groups. Both CoTPyPz and the tetraruthenated cobalt porphyrazine species, TRuCoTPyPz, form very homogenous molecular films just by dropcasting their methanol solutions onto GCE electrodes. Such films exhibited low overpotentials for O₂ evolution, e.g., 560 e 340 mV, respectively, displaying high stability, typically exceeding 15 h. The kinetic parameters obtained from the Tafel plots showed that the peripheral complexes are very important for the electrocatalytic activity. Hyperspectral Raman images taken along the electrochemical process demonstrated that the cobalt center is the primary active catalyst site, but its performance is enhanced by the ruthenium complexes, which act as electron-donating groups, in the supramolecular system.

A tin porphyrin axially-coordinated two-dimensional covalent organic polymer for efficient hydrogen evolution

Herein, we demonstrate a facile strategy for constructing an efficient and stable hydrogen evolution reaction (HER) catalyst, i.e. a tin porphyrin axially-coordinated 2D covalent organic polymer (SnTPPCOP). SnTPPCOP exhibits promising HER activity with a low overpotential of 147 mV at 10 mA cm^-2 due to its unique structural properties, ranking among the best records reported recently.

Recent Advances in Porphyrin-Based Systems for Electrochemical Oxygen Evolution Reaction

Oxygen evolution reaction (OER) plays a pivotal role in the development of renewable energy methods, such as water-splitting devices and the use of Zn–air batteries. First-row transition metal complexes are promising catalyst candidates due to their excellent electrocatalytic performance, rich abundance, and cheap price. Metalloporphyrins are a class of representative high-efficiency complex catalysts owing to their structural and functional characteristics. However, OER based on porphyrin systems previously have been paid little attention in comparison to the well-described oxygen reduction reaction (ORR), hydrogen evolution reaction, and CO2 reduction reaction. Recently, porphyrin-based systems, including both small molecules and porous polymers for electrochemical OER, are emerging. Accordingly, this review summarizes the recent advances of porphyrin-based systems for electrochemical OER. Firstly, the electrochemical OER for water oxidation is discussed, which shows various methodologies to achieve catalysis from homogeneous to heterogeneous processes. Subsequently, the porphyrin-based catalytic systems for bifunctional oxygen electrocatalysis including both OER and ORR are demonstrated. Finally, the future development of porphyrin-based catalytic systems for electrochemical OER is briefly prospected.

Phosphine Oxide Porous Organic Polymers Incorporating Cobalt(II) Ions: Synthesis, Characterization, and Investigation of H2 Production

Suitably functionalized porous matrices represent versatile platforms to support well-dispersed catalytic centers. In the present study, porous organic polymers (POPs) containing phosphine oxide groups were fabricated to bind transition metals and to be investigated for potential electrocatalytic applications. Cross-linking of mono- and di-phosphine monomers with multiple phenyl substituents was subject to the Friedel-Crafts (F-C) reaction and the oxidation process, which generated phosphine oxide porous polymers with pore capacity up to 0.92 cm³/g and a surface area of about 990 m²/g. The formation of the R₃P·BH₃ borohydride adduct during synthesis allows to extend the library of phosphine-based monomeric entities when using FeCl₃. The porous polymers were loaded with 0.8-4.2 w/w % of cobalt(II) and behaved as hydrogen evolution reaction (HER) catalysts with a Faradaic efficiency of up to 95% (5.81 × 10^-5 mol H₂ per 11.76 C) and a stable current density during repeated controlled potential experiments (CPE), even though with high overpotentials (0.53-0.68 V to reach a current density of 1 mA·cm^-2). These studies open the way to the effectiveness of tailored phosphine oxide POPs produced through an inexpensive and ecofriendly iron-based catalyst and for the insertion of transition metals in a porous architecture, enabling electrochemically driven activation of small molecules.

Strongly Coupled Nitrogen-Doped Mo2C@CoNi Alloy Hybrid Architecture toward Efficient Hydrogen Evolution Reaction

Development of high-efficiency electrocatalysts for water splitting is a promising channel to produce clean hydrogen energy. Herein, we demonstrate that the combination of nitrogen-doped Mo₂C and CoNi alloy to form a hybrid architecture is an effective way to produce hydrogen from electrochemical water splitting. Benefiting from a combination of mechanisms, the optimized N-Mo₂C@CoNi-650 shows remarkable hydrogen evolution reaction (HER) activity with small overpotentials of 35, 123, and 220 mV to reach the current density of 10, 50, and 100 mA cm^-2 in alkaline media, respectively, outperforming most previously reported HER electrocatalysts. The efficient electrocatalytic performance is ascribed to the highly exposed active sites, fast reaction kinetics, and improved charge-transfer steaming from the synergistic effect between each component. This work presents a new insight into designing and preparing highly efficient electrocatalysts toward the HER.

Porous organic polymers for electrocatalysis

Porous organic polymers (POPs) composed of organic building units linked via covalent bonds are a class of lightweight porous network materials with high surface areas, tuneable pores, and designable components and structures. Owing to their well-preserved characteristics in terms of structure and composition, POPs applied as electrocatalysts have shown promising activity and achieved considerable advances in numerous electrocatalytic reactions, including the hydrogen evolution reaction, oxygen evolution reaction, oxygen reduction reaction, CO₂ reduction reaction, N₂ reduction reaction, nitrate/nitrite reduction reaction, nitrobenzene reduction reaction, hydrogen oxidation reaction, and benzyl alcohol oxidation reaction. Herein, we present a systematic overview of recent advances in the applications of POPs in these electrocatalytic reactions. The synthesis strategies, specific active sites, and catalytic mechanisms of POPs are summarized in this review. The fundamental principles of some electrocatalytic reactions are also concluded. We further discuss the current challenges of and perspectives on POPs for electrocatalytic applications. Meanwhile, the possible future directions are highlighted to afford guidelines for the development of efficient POP electrocatalysts.

A binary carbon@silica@carbon hydrophobic nanoreactor for highly efficient selective oxidation of aromatic alkanes

Nanoreactors with a delimited void space and a large number of mesoporous structures have attracted great attention as potential heterogeneous catalysts. In this work, a cobalt and nitrogen co-doped binary carbon@silica@carbon hydrophobic nanoreactor was synthesized by an in situ synthesis method. Cobalt porphyrin was used as an active component to construct Co-N_x sites, and the purpose of the double carbon layer coating was to enhance the hydrophobicity of the surface of the nanoreactor. The optimal nanoreactor could achieve 96.9% ethylbenzene conversion and 99.1% acetophenone selectivity and showed outstanding universality to many other aromatic alkanes. The superior performance was mainly due to the presence of double carbon layers and the high content of Co-N_x sites. The double hydrophobic carbon layer coating could not only promote the adsorption of organic molecules, but also implant Co-N_x active sites on both the inner and outer surfaces of the nanoreactor. This work proposed a meaningful strategy to obtain a highly efficient nanoreactor for C-H bond oxidation.

CoS2 Nanoparticles Embedded in Covalent Organic Polymers as Efficient Electrocatalyst for Oxygen Evolution Reaction with Ultralow Overpotential

Cobalt disulfide (CoS₂ ) has been explored as attractive electrocatalyst for oxygen evolution reaction (OER). However, bulk CoS₂ sheets have limited catalytic activity due to low exposure of active sites. Herein, through an in-situ vulcanization approach, CoS₂ nanoparticles are embedded into bipyridine-containing covalent organic polymer (BP-COP). The as-prepared nanocomposite CoS₂ @BP-COP exhibits high catalytic activity toward OER with an ultra-low overpotential of 270 mV (vs. RHE) at a current density of 10 mA cm^-2 , a small Tafel slope of 36 mV dec^-1 , and an excellent durability for 24 h without decay. The surface of CoS₂ is partially converted into CoOOH to form CoS₂ /CoOOH as active sites under OER conditions. CoS₂ @BP-COP displays superior OER catalytic activity to CoS₂ nanosheets and commercially available RuO₂ under the same conditions. The outstanding OER performance activity of CoS₂ @BP-COP could be attributed to the uniform and small particle sizes of CoS₂ /CoOOH distributed in BP-COP.

Synergistic effects of Co/CoO nanoparticles on imine-based covalent organic frameworks for enhanced OER performance

The development of non-noble metal electrocatalysts toward the oxygen evolution reaction (OER) is a key challenge in advancing electrocatalytic water splitting, which is essential for the commercialization of clean and renewable energy. A covalent organic framework (COF) has a precise and controllable structure, high π-π conjugation, large surface area, and porosity and shows great potential as an OER electrocatalyst. However, the relative conductivity and inherent instability greatly limit the further improvement of its performance. Herein, imine-based COF-supported Co/CoO nanoparticles (Co/CoO@COF) were developed for the high-performance electrocatalytic OER. For the Co/CoO@COF catalyst, Co/CoO could form a conjugation effect with the COF, which can increase the electron cloud density of the delocalized large π bond, then improve the conductivity. The combination of Co/CoO and COF effectively enhances the structural stability of the catalyst and enriches the catalytic active sites. Under alkaline conditions, the Co/CoO@COF shows a very low overpotential of 278 mV at a current density of 10 mA cm^-2, and a Tafel slope of 80.11 mV dec^-1 which is better than that of commercial RuO₂.

Progress and Perspectives on Covalent-organic Frameworks (COFs) and Composites for Various Energy Applications

Covalent-organic frameworks (COFs), being a new member of the crystalline porous materials family, have emerged as important materials for energy storage/conversion/generation devices. They possess high surface areas, ordered micro/mesopores, designable structures and an ability to precisely control electro-active groups in their pores, which broaden their application window. Thanks to their low weight density, long range crystallinity, reticular nature and tunable synthesis approach towards two and three dimensional (2D and 3D) networks, they have been found suitable for a range of challenging electrochemical applications. Our review focuses on the progress made on the design, synthesis and structure of COFs and their composites for various energy applications, such as metal-ion batteries, supercapacitors, water-splitting and solar cells. Additionally, attempts have been made to correlate the structural and mechanistic characteristics of COFs with their applications.

Enhanced optical limiting and hydrogen evolution of graphene oxide nanohybrids covalently functionalized by covalent organic polymer based on porphyrin

Herein, we report a novel graphene oxide (GO) nanohybrid covalently functionalized by covalent organic polymer (COP) based on porphyrin (GO-TPPCOP), as the optical limiter and hydrogen evolution reaction (HER) electrocatalyst. The GO-TPPCOP nanohybrid exhibits markedly enhanced optical limiting and HER activity over that of TPP, GO and TPPCOP alone. More importantly, the optical limiting property and HER activity of GO-TPPCOP nanohybrid are comparable to the state-of-the-art activity of materials from some previous reports. The possible mechanisms of optical limiting and HER are explored by various means, including UV-Vis absorption, fluorescence, photocurrent, electrochemical impedance spectra and Raman spectroscopic techniques. It is demonstrated that the synergistic effect and charge transfer between GO and TPPCOP are important factors in determining its optical limiting and HER performances. These results demonstrate a new strategy to design and develop functional nanohybrids for efficient optical limiting and HER activity by the covalent linkage of GO with COPs.

Porphyrin-based frameworks for oxygen electrocatalysis and catalytic reduction of carbon dioxide

The recent progress made on porphyrin-based frameworks and their applications in energy-related conversion technologies (e.g., ORR, OER and CO₂RR) and storage technologies (e.g., Zn–air batteries).

Construction of a novel 2D–2D heterojunction by coupling a covalent organic framework and In2S3 for photocatalytic removal of organic pollutants with high efficiency

TpPa-1 COF was coupled with an inorganic narrow-band gap semiconductor In2S3 to form a novel 2D–2D heterojunction by a facile hydrothermal method.