Controlled growth of AgI nanoparticles on hollow WO3 hierarchical structures to act as Z-scheme photocatalyst for visible-light photocatalysis

Z-Scheme Heterojunction Excited by DNA-Programmed Upconversion Nanotransducers for a Near-Infrared Light-Actuated Lab-on-Paper Device

Herein, a flexible near-infrared (NIR) light-actuated photoelectrochemical (PEC) lab-on-paper device was constructed toward miRNA-122 detection, utilizing the combination of DNA-programmed NaYF4/Yb,Tm upconversion nanoparticles (UCNPs) and the Z-scheme AgI/WO3 heterojunction grown in situ on gold nanoparticle-decorated 3D cellulose fibers. The UCNPs were employed as light transducers for converting NIR light into ultraviolet/visible (UV/vis) light to excite the nanojunction. The multiple diffraction of NaYF4/Yb,Tm matched the absorption band of the Z-scheme AgI/WO3 heterojunction, resulting in enhanced PEC photocurrent output. This prepared Z-scheme heterojunction effectively directed charge migration and highly facilitated the electron-hole pair separation. Target miRNA-122 activated the nonenzyme catalytic hairpin assembly signal amplification strategy, generating duplexes which caused the exfoliation of NaYF4/Yb,Tm UCNPs from the biosensor electrode and lowered the photocurrent under 980 nm irradiation. Under optimized circumstances, the proposed NIR-actuated PEC lab-on-paper device presented accurate miRNA-122 detection within a wide linear range of 10 fM-100 nM with a low limit of detection of 2.32 fM, providing a reliable strategy in the exploration of NIR-actuated PEC biosensors for low-cost, high-performance bioassay in clinical applications.

In-situ synthesis of novel dual S-scheme AgI/Ag6Mo7O24/g-C3N4 heterojunctions with tandem structure for photocatalytic degradation of organic pollutants

The controllable design of multivariate heterojunction with sequential structures is of significant relevance for breaking the performance limit of binary composite photocatalysts. In this work, the novel dual S-scheme ternary-component AgI/Ag₆Mo₇O₂₄/exfoliated g-C₃N₄ (ECN) composite was prepared by a two-step in-situ synthetic strategy. The energy band bending at the heterointerface and the formation of dual built-in electric field could be observed due to distinct work functions of different components in the ternary composite. Benefiting from the sequential heterojunction structure, the AgI/Ag₆Mo₇O₂₄/ECN composite achieved 98.7% removal efficiency of 2-nitrophenol (2-NP) within 70 min under visible light irradiation, and AgI/Ag₆Mo₇O₂₄/ECN also showed higher degradation efficiency for a variety of organic pollutants such as methylene blue (MB), rhodamine B (RhB), methyl orange (MO), 4-nitrophenol (4-NP), 2-sec-butyl-4,6-dinitrophenol (DNBP) and tetracycline (TC). Notably, •OH and •O₂^- played dominant roles in the AgI/Ag₆Mo₇O₂₄/ECN set up, which was consistent with the dual S-scheme charge transfer mechanism. In-depth insights for the photodegradation of 2-NP were presented based on a combined DFT study and GC-MS analysis. Additionally, the photoreduction of Ag⁺ in AgI/Ag₆Mo₇O₂₄/ECN was also evaded by the fast transfer of photogenerated electrons through the dual S-scheme pathway, achieving the effect of killing two birds with one stone.

Core-Shell Engineered WO3 Architectures: Recent Advances from Design to Applications

Ongoing efforts to design novel materials with efficient structure-property-performance relations prove challenging. Core-shell structures have emerged as novel materials with controlled production routes and highly tailorable properties that offer extensive advantages in advanced oxidation processing, particularly in photocatalysis and photoelectrochemical applications. WO₃ , which is an optoelectronically active semiconductor material, is a popular material in current studies in the field of photo(electro)catalysis. Considerable progress has been made using core-shell WO₃ architectures, which warrants an evaluation in terms of processing and preparedness for their use in versatile catalytic and energy storage applications. This paper presents an in-depth assessment of core-shell WO₃ architectures by highlighting the design challenges and protocols in powder and thin-film chemical processing. The development of specific core-shell designs for use in targeted applications, such as H₂ production, CO₂ reduction, wastewater treatment, batteries, supercapacitors, and sensing, is analyzed. The fundamental role of WO₃ in core-shell structures to enhance efficiency is also discussed, along with the limitations and improvement strategies. Further, the prospects of core-shell WO₃ architectures in energy conversion and environmental applications are suggested.

Achieving Ultrasensitive Point-of-Care Assay for Mercury Ions with a Triple-Mode Strategy Based on the Mercury-Triggered Dual-Enzyme Mimetic Activities of Au/WO3 Hierarchical Hollow Nanoflowers

The exploration of new strategies for portable detection of mercury ions with high sensitivity and selectivity is of great value for biochemical and environmental analyses. Herein, a straightforward, convenient, label-free, and portable sensing platform based on a Au nanoparticle (NP)-decorated WO₃ hollow nanoflower was constructed for the sensitive and selective detection of Hg(II) with a pressure, temperature, and colorimetric triple-signal readout. The resulting Au/WO₃ hollow nanoflowers (Au/WO₃ HNFs) could efficaciously impede the aggregation of Au NPs, thus significantly improving their catalytic activity and stability. The sensing mechanism of this new strategy using pressure as a signal readout was based on the mercury-triggered catalase mimetic activity of Au/WO₃ HNFs. In the presence of the model analyte Hg(II), H₂O₂ in the detection system was decomposed to O₂ fleetly, resulting in a detectable pressure signal. Accordingly, the quantification of Hg(II) was facilely realized based on the pressure changes, and the detection limit could reach as low as 0.224 nM. In addition, colorimetric and photothermal detection of Hg(II) using the Au/WO₃ HNFs based on their mercury-stimulated peroxidase mimetic activity was also investigated, and the detection limits were calculated to be 78 nM and 0.22 μM for colorimetric and photothermal methods, respectively. Hence, this nanosensor can even achieve multimode determination of Hg(II) with the concept of point-of-care testing (POCT). Furthermore, the proposed multimode sensing platform also displayed satisfactory sensing performance for the Hg(II) assay in actual water samples. This promising strategy may provide novel insights on the fabrication of a multimode POCT platform for sensitive, selective, and accurate detection of heavy metal ions.

Rational construction of Ag3PO4/WO3 step-scheme heterojunction for enhanced solar-driven photocatalytic performance of O2 evolution and pollutant degradation

Heterojunction engineering has been regarded as a promising strategy to sufficiently utilizing photogenerated charge carriers, thus benefiting the improvement of photocatalytic performance. Herein, Ag₃PO₄/WO₃ S-scheme heterojunction was synthesized via a simple deposition-precipitation process, and its photocatalytic activity was evaluated by monitoring water splitting and pollutant degradation under visible light. As a result, Ag₃PO₄/WO₃ with optimized ratio photocatalyst showed enhanced photocatalytic activity in oxygen production (306.6 μmol·L^-1·h^-1) relative to pure Ag₃PO₄ (204.4 μmol·L^-1·h^-1). Additionally, it also exhibits rapid toxicity elimination efficiency over hexavalent chromium ions (Cr⁶⁺) and ciprofloxacin (CIP) with degrading rate of 72% and 83% within 30 min, respectively. According to a series characterization, a possible S-scheme photocatalytic mechanism of Ag₃PO₄/WO₃ was demonstrated in detail, which endowed the heterojunction with strong redox abilities to provide powerful diving force towards the photocatalytic reaction. This work presents an innovative perspective to construct Ag₃PO₄-based S-scheme heterojunctions for boosting photocatalytic performance for various applications.

TiO2-Acetylacetone as an Efficient Source of Superoxide Radicals under Reduced Power Visible Light: Photocatalytic Degradation of Chlorophenol and Tetracycline

Visible light-sensitive TiO2-based nanomaterials are widely investigated for photocatalytic applications under high power (≥300 W) UV and visible light. The formation of charge transfer complexes (CTCs) between bidentate ligands and nanocrystalline TiO2 promotes visible light absorption and constitutes a promising alternative for environmental remediation under reduced visible light power. However, the efficiency of photodegradation, the volatilization profile of bidentates, and the role of reactive oxidizing species (ROS) are not fully understood. In this study, thermogravimetric analyses coupled with mass spectroscopy (TGA-MS) were performed on TiO2-Acetylacetone (ACAC) CTC. TiO2-ACAC CTC calcined at 300 °C (TiO2-A300) was applied for the photocatalytic degradation of chlorophenol (4-CP) and tetracycline (TC) under low power visible light (26 W). Furthermore, the ROS scavengers isopropanol and benzoquinone were added for studying the photocatalytic role of •OH and •O2− radicals. The TGA-MS showed the release of ACAC fragments, such as ethyl ions and acetone, in the range between 150 °C and 265 °C, while between 300 °C and 450 °C only CO2 and H2O were released during oxidation of ACAC. The photocatalytic abatement of tetracycline (68.6%), performed by TiO2-A300, was ~two times higher than that observed for chlorophenol (31.3%) after 6 h, indicating a distinct participation of ROS in the degradation of these pollutants. The addition of the ROS scavenger revealed •O2− radicals as primarily responsible for the high efficiency of TiO2-ACAC CTC under reduced visible light. On the other hand, the •OH radicals are not efficiently generated in the CTC. Therefore, the development of heterostructures based on TiO2-ACAC CTC can increase the generation of ROS through coupling with semiconductors capable of generating •OH under visible light.

Fabrication of zirconium-based metal-organic frameworks@tungsten trioxide (UiO-66-NH2@WO3) heterostructure on carbon cloth for efficient photocatalytic removal of tetracycline antibiotic under visible light

Designing recyclable photocatalysts with high activity and stability has drawn considerable attention in the fields of sewage treatment. Herein, a series of heterojunctions constructed by zirconium-based metal-organic frameworks (UiO-66-NH₂) and tungsten trioxide (WO₃) is immobilized on carbon cloth via a facile solvothermal method, resulting in highly recyclable photocatalysts. Multiple characterization techniques, such as X-ray diffraction, scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and Fourier-transform infrared spectroscopy, verify the successful synthesis of UiO-66-NH₂ nanospheres on the surface of needlelike WO₃ modified carbon cloth. Results show that the optimal heterojunction photocatalyst exhibits excellent photocatalytic degradation efficiency for the removal of tetracycline (TC) from water, for which nearly 100% of TC is degraded within 60 min under visible light. Trapping experiments and electron spin resonance (ESR) spectra analyses demonstrate that the superoxide radicals O₂^- and photogenerated hole h⁺ play a dominant role in the degradation process. Excellent photocatalytic activity is dominantly attributed to the effective separation of photoinduced carriers in this type-Ⅱ heterostructure system. Moreover, the possible photocatalytic oxidation degradation pathway is confirmed by analyzing intermediates using liquid chromatography mass spectrometry (LC-MS). This study offers a highly efficient strategy to design recyclable heterojunction photocatalysts for the degradation of refractory antibiotics in sewage.

A visible light driven 3D hierarchical CoTiO3/BiOBr direct Z-scheme heterostructure with enhanced photocatalytic degradation performance

The CoTiO3/BiOBr (CTBB) composite displays excellent photocatalytic activity because of the unique nanostructure induced efficient charge separation and transportation in interface of CoTiO3 and BiOBr.

Pollutant degradation with mediator Z-scheme heterojunction photocatalyst in water: A review

The Z-scheme heterojunction is a photocatalyst with narrow band gap and sufficiently high oxidization and reduction powers for degradation of pollutants in waters. This review firstly summarizes the fundamentals of photocatalysis, and explains the need to develop Z-scheme heterojunctions to harvest energy from sunlight effectively. Secondly, contemporary reports of degradation wastewater pollutants, including organic dyes, antibiotics, and other chemicals are reviewed and discussed. A challenge in the selection of an appropriate Z-scheme for removing a specific pollutant is the lack of available energy levels that are offered by the catalyst and the lack of redox energy levels that are required to break down essential chemical bonds of the pollutants. With reference to the redox energy levels offered by the active photocatalytic species, the redox energy levels of specific pollutants studied in literature are estimated. Challenges and prospects concerning the use of the Z-scheme to degrade recalcitrant pollutants under irradiation by sunlight are outlined at the end of this review.

Heterojunction photocatalysts for degradation of the tetracycline antibiotic: a review

Antibiotic pollution is a major health issue inducing antibiotic resistance and the inefficiency of actual drugs, thus calling for improved methods to clean water and wastewater. Here we review the recent development of heterojunction photocatalysis and application in degrading tetracycline. We discuss mechanisms for separating photogenerated electron-hole pairs in different heterojunction systems such as traditional, p-n, direct Z-scheme, step-scheme, Schottky, and surface heterojunction. Degradation pathways of tetracycline during photocatalysis are presented. We compare the efficiency of tetracycline removal by various heterojunctions using quantum efficiency, space time yield, and figures of merit. Implications for the treatment of antibiotic-contaminated wastewater are discussed.

Facile fabrication of AgI/Sb2O3 heterojunction photocatalyst with enhanced visible-light driven photocatalytic performance for efficient degradation of organic pollutants in water

The construction of heterojunction is considered as a promising approach to designing highly effective visible-light driven photocatalysts. In this research, the AgI/Sb₂O₃ heterojunction photocatalyst was synthesized by a simple in situ deposition-precipitation procedure, which was supported by XPS results. Among the prepared samples, the 60% AgI/Sb₂O₃ samples exhibited the best ARG degradation ratio (98.3%) in 1 h under visible light irradiation, while the pure Sb₂O₃ and AgI exhibited almost none photocatalytic performance. The trapping experiments and EPR proved that the photo-generated ·O₂^- and ·OH made major contributions to the photocatalytic degradation of ARG by the 60% AgI/Sb₂O₃ samples. The enhanced photocatalytic performance of AgI/Sb₂O₃ heterojunction photocatalysts was ascribed to that the e^- produced in the CB of AgI would be transferred to the empty CB of Sb₂O₃, which could effectively promote separation of photo-induced carries. More importantly, the transfer of electrons from AgI to Sb₂O₃ would be in favor of restraining the reduction of Ag⁺ to Ag⁰ resulting in the good stability of heterojunction photocatalysts. The heterojunction photocatalyst provided in this work might be a prospective candidate for decontamination of water.

CdS quantum dots-decorated InOOH: Facile synthesis and excellent photocatalytic activity under visible light

For the first time, CdS quantum dots (QDs)-decorated InOOH (CdS-In for short) was synthesized by a facile photodeposition method. The experiment results showed that CdS-In samples exhibited excellent activity and stability towards photocatalytic reduction of nitro aromatics. The conversion ratio of 4-nitroaniline (4-NA) over CdS-In sample that was prepared with photodeposition time of 120 min (CdS-In-120) reached up to 99.4% under visible light irradiation for 40 min, which was even higher than that achieved over commercial CdS (86.2%). Besides the significant enhancement of visible light absorption, quantum sized CdS were decorated evenly on the surface of InOOH, which was very beneficial for the high activity. Furthermore, the heterogeneous junction formed at the interface of CdS QDs and InOOH can significantly increase the separation efficiency of photogenerated charge carriers. Active species control experiment and electron spin resonance (ESR) technique have proved that photogenerated electrons are the main active species towards photocatalytic reduction of nitro aromatics. It is anticipated that our study would offer meaningful insights for exploring novel InOOH-based visible light photocatalysts towards efficient reduction of nitro aromatics.

Fabrication of one dimensional hierarchical WO3/BiOI heterojunctions with enhanced visible light activity for degradation of pollutants

One-dimensional (1D) hierarchical WO₃/BiOI p–n (WB) heterojunctions with different mass percentages of WO₃ were fabricated through a precipitation process. Various analytical techniques were employed to characterize the resulting WB composites, and their photocatalytic properties were measured by the degradation of rhodamine B (RhB) and methylene blue (MB) under irradiation of visible light. The WB heterojunctions showed largely enhanced photocatalytic performance as compared to the pure photocatalysts. Notably, the degradation rate constant of RhB by WB-10 was 3.3 and 33.6 times higher than those of pure BiOI and WO₃, respectively. The enhanced activity could be attributed to the hierarchical p–n heterostructures, which can supply more reaction sites and effectively promote the separation of photogenerated charge carriers, as confirmed by PL and photocurrent. Trapping experiments implied that holes (h⁺) and superoxide anion radicals (˙O₂⁻) were the dominant active species for organic pollutants decomposition on the WB composites. This work may benefit the construction of hierarchical heterostructures with high photocatalytic efficiency.

One-dimensional (1D) hierarchical WO₃/BiOI p–n (WB) heterojunctions with different mass percentages of WO₃ were fabricated through a precipitation process.

An effective non-equivalent ion exchange method for building an advanced Z-scheme WO3/Bi2WO6 photocatalyst

X-ray diffraction (XRD) patterns of (a) WO3, Bi2WO6 and (b) WBs composites.