Enriched oxygen vacancies of Cu2O/SnS2/SnO2 heterostructure for enhanced photocatalytic reduction of CO2 by water and nitrogen fixation

Novel pyrochlore type europium stannate - tungsten disulfide heterostructure for light driven carbon dioxide reduction and nitrogen fixation

The reduction of carbon dioxide (CO2) and nitrogen (N2) to value-added products is a substantial area of research in the fields of sustainable chemistry and renewable energy that aims at reducing greenhouse gas emissions and the production of alternative fuels and chemicals. The current work deals with the synthesis of pyrochlore-type europium stannate (Eu2Sn2O7: EuSnO), tungsten disulfide (WS2:WS), and novel EuSnO/WS heterostructure by a simple and facile co-precipitation-aided hydrothermal method. Using different methods, the morphological and structural analyses of the prepared samples were characterized. It was confirmed that a heterostructure was formed between the cubic EuSnO and the layered WS. Synthesized materials were used for photocatalytic CO2 and N2 reduction under UV and visible light. The amount of CO and CH4 evolved due to CO2 reduction is high in EuSnO/WS (CO = 104, CH4 = 64 μmol h-1 g-1) compared to pure EuSnO (CO = 36, CH4 = 70 μmol h-1 g-1) and WS (CO = 22, CH4 = 1.8 μmol h-1 g-1) under visible light. The same trend was observed even in the N2 fixation reaction under visible light, and the amount of NH4+ produced was found to be 13, 26, and 41 μmol h-1 g-1 in the presence of WS, EuSnO and EuSnO/WS, respectively. Enhanced light-driven activity towards CO2 and N2 reduction reactions in EuSnO/WS is due to the efficient charge separation through the formation of type-II heterostructure, which is in part associated with photocurrent response, photoluminescence, and electrochemical impedence spectroscopic (EIS) results. The EuSnO/WS heterostructure's exceptional stability and reusability may pique the attention of pyrochlore-based composite materials in photocatalytic energy and environmental applications.

Vacancy Engineering in 2D Transition Metal Chalcogenide Photocatalyst: Structure Modulation, Function and Synergy Application

Transition metal chalcogenides (TMCs) are widely used in photocatalytic fields such as hydrogen evolution, nitrogen fixation, and pollutant degradation due to their suitable bandgaps, tunable electronic and optical properties, and strong reducing ability. The unique 2D malleability structure provides a pre-designed platform for customizable structures. The introduction of vacancy engineering makes up for the shortcomings of photocorrosion and limited light response and provides the greatest support for TMCs in terms of kinetics and thermodynamics in photocatalysis. This work reviews the effect of vacancy engineering on photocatalytic performance based on 2D semiconductor TMCs. The characteristics of vacancy introduction strategies are summarized, and the development of photocatalysis of vacancy engineering TMCs materials in energy conversion, degradation, and biological applications is reviewed. The contribution of vacancies in the optical range and charge transfer kinetics is also discussed from the perspective of structure manipulation. Vacancy engineering not only controls and optimizes the structure of the TMCs, but also improves the optical properties, charge transfer, and surface properties. The synergies between TMCs vacancy engineering and atomic doping, other vacancies, and heterojunction composite techniques are discussed in detail, followed by a summary of current trends and potential for expansion.

The prospect of CuxO-based catalysts in photocatalysis: From pollutant degradation, CO2 reduction, and H2 production to N2 fixation

The topic of photocatalysis and CuxO-based materials has been intertwined for quite a long time. Its relatively high abundance in the earth's crust makes it an important target for researchers around the globe. One of the properties exploited by researchers is its ability to exist in different oxidation states (Cu0, Cu+, Cu2+, and Cu3+) and its implications on photocatalytic efficiency improvement. Recently, they have been extensively used as photocatalytic materials for dye and pollutant degradation. However, it has almost reached saturation levels, therefore, currently, they are being mostly utilized for CO2 reduction and H2 evolution. Hence, this review will discuss the evolution (in application) of CuxO-based photocatalysts, relating to their past, present, and future. Moreover, photocatalytic efficiency improvement strategies such as doping, heterojunction formation, and carbonaceous construction with other materials will also be touched upon. Finally, the prospect of Cu2O-based photocatalysts will be discussed in the field of photocatalytic N2 fixation to ammonia. The significance of N2 chemisorption on photocatalysts to maximize ammonia production will also be given importance.

Sn-based materials in photocatalysis: A review

Development and the application of Sn-based materials have become more prevalent in recent years due to concerns regarding the energy crisis, environmental pollution, and the urgent need of constructing inexpensive and highly effective photocatalysis. The recent advancement in Sn-based materials for efficient photocatalysts, such as Sn alloys, Sn oxides, Sn sulfides, Sn selenides, Sn niobates, Sn tantalites, and Sn tungstates, is summarized in this study. Several design ideas for increasing the photoactivity of Sn-based materials in various photocatalytic applications are emphasized. In addition, we considered their present applications in energy generation (H2 evolution, CO2 reduction, and N2 fixation) and environmental remediation (air purification and wastewater treatment). As a result, the current review will deepen the reader's understanding of the properties and potential uses of Sn-based materials in photocatalysis. Hence, this paper will serve as a guide in promoting the domain of Sn-based materials for future photocatalytic technologies.

Recent Progress in Metal Oxide-Based Photocatalysts for CO2 Reduction to Solar Fuels: A Review

One of the challenges in developing practical CO₂ photoconversion catalysts is the design of materials with a low cost, high activity and good stability. In this paper, excellent photocatalysts based on TiO₂, WO₃, ZnO, Cu₂O and CeO₂ metal oxide materials, which are cost-effective, long-lasting, and easy to fabricate, are evaluated. The characteristics of the nanohybrid catalysts depend greatly on their architecture and design. Thus, we focus on outstanding materials that offer effective and practical solutions. Strategies to improve CO₂ conversion efficiency are summarized, including heterojunction, ion doping, defects, sensitization and morphology control, which can inspire the future improvement in photochemistry. The capacity of CO₂ adsorption is also pivotal, which varies with the morphological and electronic structures. Forms of 0D, 1D, 2D and 3DOM (zero/one/two-dimensional- and three-dimensional-ordered macroporous, respectively) are involved. Particularly, the several advantages of the 3DOM material make it an excellent candidate material for CO₂ conversion. Hence, we explain its preparation method. Based on the discussion, new insights and prospects for designing high-efficient metallic oxide photocatalysts to reduce CO₂ emissions are presented.

Photoinduced CO2 and N2 reductions on plasmonically enabled gallium oxide

Ag-containing ZnO/ β-Ga2O3 semiconductor, which exhibit reduced bandgap, increased light absorption, and hydrophilicity, have been found to be useful for photocatalytic CO2 reduction and N2 fixation by water. The charge-separation is facilitated by the new interfaces and inherent vacancies. The Ag@GaZn demonstrated the highest photocurrent response, about 20- and 2.27-folds that of the Ga and GaZn samples, respectively. CO, CH4, and H2 formed as products for photo-reduction of CO2. Ag@GaZn catalyst exhibited the highest AQY of 0.121 % at 400 nm (31.2 W/m2). Also, Ag@GaZn generated 740 μmolg-1 of NH4+ ions, which was about 18-folds higher than Ga sample. In situ DRIFTS for isotopic-labelled 13CO2 and 15N2 reaffirmed the photo-activity of as-synthesized catalysts. Density functional theory provided insight into the relative affinity of different planes of heterostructures towards H2O, CO2 and N2 molecules. The structure-photoactivity rationale behind the intriguing Ag@GaZn sample offers a fundamental insight into the role of plasmonic Ag and design principle of heterostructure with improved photoactivity and stability.

Infrared analysis of catalytic CO2 reduction in hydrogenated germanium

The oxidation and carbisation kinetics of porous amorphous and nano-crystalline hydrogenated germanium (a-Ge:H and nc-Ge:H) films exposed to ambient air and deionized water have been studied using vibration modes observed by infrared spectroscopy. Based on infrared analysis, a two-step process of first oxidation by water and secondly carbisation by carbon dioxide (CO₂) is proposed that partly mimics the (photo-)catalytic processes in artificial (photo)synthesis. It is shown that water acts like the precursor for oxidation of porous a-Ge:H and nc-Ge:H in the first step. The incorporation of oxygen in a-Ge:H and nc-Ge:H alloys occurs preferentially at Ge-dangling bonds and not at the Ge–Ge back bonds like in hydrogenated silicon alloys (next of kin IV-valence element). The formation of germanium oxide (GeO) tissue at void surfaces locally creates Ge alloys with significantly lower energy levels for the valence band that can align with the half reaction for water reduction. The heterogeneous nature of a-Ge:H and nc-Ge:H oxidation will result in local catalytic generation of electrons and protons. It is proposed that these charge carriers and ions act as precursors for the second-step reaction based on carbisation that includes both the adsorption of CO₂ and formation of CO and formaldehyde.

Based on infrared analysis, a two-step process is proposed of first oxidation by water followed by the catalytic reduction of CO₂, on amorphous and nanocrystalline hydrogenated germanium films, to products like CO, formic acid and formaldehyde.

Bioinspired spike-like double yolk–shell structured TiO2@ZnIn2S4 for efficient photocatalytic CO2 reduction

A spike-like double yolk–shell structured TiO2@ZnIn2S4 (D-Y-TiO2@ZnIn2S4) photocatalyst was designed, which possesses superior photocatalytic CO2 reduction efficiency.

Heterojunction-based photocatalytic nitrogen fixation: principles and current progress

Nitrogen fixation is considered one of the grand challenges of the 21st century for achieving the ultimate vision of a green and sustainable future. It is crucial to develop and design sustainable nitrogen fixation techniques with minimal environmental impact as an alternative to the energy-cost intensive Haber-Bosch process. Heterojunction-based photocatalysis has recently emerged as a viable solution for the various environmental and energy issues, including nitrogen fixation. The primary advantages of heterojunction photocatalysts are spatially separated photogenerated charge carriers while retaining high oxidation and reduction potentials of the individual components, enabling visible light-harvesting. This review summarises the fundamental principles of photocatalytic heterostructures, the reaction mechanism of the nitrogen reduction reaction, ammonia detection methods, and the current progress of heterostructured photocatalysts for nitrogen fixation. Finally, future challenges and prospects are briefly discussed for the emerging field of heterostructured photocatalytic nitrogen fixation.

Fast synthesis of porous iron doped CeO2 with oxygen vacancy for effective CO2 photoreduction

The activity of photocatalytic CO₂ conversion to carbon-containing products is determined by the adsorption and activation of CO₂ molecules on the surface of catalyst. Here, iron doped porous CeO₂ with oxygen vacancy (PFeCe) was prepared by one-step combustion method. The amount of CO₂ adsorbed via using the porous structure has been significantly increased in the case of a relatively small specific surface area and CO₂ molecules are more easily captured and undergo a reduction reaction with photoinduced carriers. In addition, oxygen vacancies are formed in the iron doped CeO₂ lattice as the active sites for CO₂ reduction, which can form strong interactions with CO₂ molecules, thereby effectively activating CO₂ molecules. The reduction products of CO₂ over PFeCe composite are CO and CH₄, which is approximately 9.0 and 7.7 folds than that of CeO₂. This work offers insights for the construction of efficient ceria-based photocatalysts to further achieve robust solar CO₂ conversion.

Tuning the exposure of BiVO4-{010} facets to enhance the N2 photofixation performance

Effective separation of photoexcited carriers and chemisorption of the N₂ molecule are two key issues to efficient nitrogen photofixation. The spatial charge separation of BiVO₄ with anisotropic exposed facets, namely the transfer of photoexcited electrons and holes to {010} and {110} facets, respectively, helps to enhance the separation ability of photogenerated carriers. Theoretical calculation results predict that a surface oxygen vacancy is easier to form on the (010) facet than on the (110) facet of BiVO₄. Accordingly, in this study, enhanced N₂ photofixation performance has been achieved for the first time by tuning the exposure of {010} facets of BiVO₄.

Effective separation of photoexcited carriers and chemisorption of the N₂ molecule are two key issues to efficient nitrogen photofixation.

Fabrication of size-controlled hierarchical ZnS@ZnIn2S4 heterostructured cages for enhanced gas-phase CO2 photoreduction

Designing and constructing advanced heterojunction architectures are desirable for boosting CO₂ photoreduction performance of semiconductor photocatalysts. Herein, we have prepared hierarchical ZnS@ZnIn₂S₄ core-shell cages with controlled particle sizes using sequential synthesis of Zeolitic imidazolate (ZIF-8) polyhedrons, ZnS cages, and ZnIn₂S₄ nanosheets on the ZnS polyhedron cages. ZIF-8 polyhedrons are firstly synthesized by a liquid-phase approach. The subsequent sulfidation of the ZIF-8 polyhedrons results in the formation of ZnS polyhedron cages, which act as substrates for fabricating ZnS@ZnIn₂S₄ core-shell cages by growing ZnIn₂S₄ nanosheets. The size of ZnS cages can be tuned to optimize CO₂ photoreduction performance of hierarchical ZnS@ZnIn₂S₄ core-shell cages. The synergy of the unique hierarchical core-shell cage-like structure and heterojunction composition endows the hybrid catalyst high incident light utilization, abundant active sites, and effective separation of photoexcited charge carriers. Benefiting from these advantages, the optimized hierarchical ZnS@ZnIn₂S₄ core-shell cages exhibit enhanced performance for CO₂ photoreduction with the CO yield of 87.43 μmol h^-1g^-1 and 84.3% selectivity, which are much superior to those of single ZnIn₂S₄ or ZnS. Upon Au decoration, the CO₂ photoreduction performance of ZnS@ZnIn₂S₄ core-shell cages is further enhanced because of the Schottky junctions and surface plasmon resonance effect.