Integrated fast-mass transfer and high Ti-sites utilization into hybrid amphiphilic TS@PMO catalyst towards efficient solvent-free methyl oleate epoxidation

High adsorption to methylene blue based on Fe3O4-N-banana-peel biomass charcoal

This research focused on utilizing banana peel as the primary material for producing mesoporous biomass charcoal through one-step potassium hydroxide activation. Subsequently, the biomass charcoal underwent high-temperature calcination with varying impregnation ratios of KOH : BC for different durations in tubular furnaces set at different temperatures. The resultant biomass charcoal was then subjected to hydrothermal treatment with FeCl3·6H2O to produce biochar/iron oxide composites. The adsorption capabilities of these composites towards methylene blue (MB) were examined under various conditions, including pH (ranging from 3 to 12), temperature variations, and initial MB concentrations (ranging from 50 to 400 mg L-1). The adsorption behavior aligned with the Langmuir model and demonstrated quasi-secondary kinetics. After five adsorption cycles, the capacity decreased from 618.64 mg g-1 to 497.18 mg g-1, indicating considerable stability. Notably, Fe3O4-N-BC exhibited exceptional MB adsorption performance.

TS-1@MCM-48 Core-Shell Catalysts for Efficient Oxidation of p-Diethylbenzene to High Value-Added Derivatives

To expand the market capacity of p-diethylbenzene (PDEB), core-shell zeolite (TS-1@MCM-48) is designed as a catalyst for PDEB oxidation. TS-1@MCM-48 catalyst is synthesized by in-situ crystallization method and characterized by X-ray diffraction (XRD), transmission electron microscope (TEM), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), N2 adsorption-desorption, in-situ electron paramagnetic resonance (EPR) and 29Si nuclear magnetic resonance (29Si MAS-NMR). Oxidation of PDEB by H2O2 was investigated systematically in liquid phase. The conversion of PDEB over TS-1@MCM-48 was 28.1 % and the total selectivity was 72.6 %, where the selectivity of EAP (p-ethylacetophenone) and EPEA (4-ethyl-α-methylbenzyl alcohol) was 28.6 % and 44.0 %, respectively. Compared with TS-1 and MCM-48 zeolite, the conversion rate of reactants and the selectivity of products have been significantly improved. The catalytic performance of TS-1@MCM-48 is derived from its well-crystallized microporous core and mesoporous shell with regular channels, which make active sites of TS-1 zeolite in the catalyst be fully utilized and mass transfer resistance be largely reduced. Further through theoretical calculation, we propose that the oxidation of PDEB is the result of the combination and mutual transformation of free radical process and carbocation process. Core-shell structure ensures the conversion rate of raw materials and improves the selectivity of products.

Design and Synthesis of Amphiphilic Catalyst [C16mim]5VW12O40Br and Its Application in Deep Desulfurization with Superior Cyclability at Room Temperature

Achieving long-term stable deep desulfurization at room temperature and recovering high value-added sulfone products is a challenge at present. Herein, a series of catalysts [C_nmim]₅VW₁₂O₄₀Br (C_nVW₁₂, 1-alkyl-3-methylimidazolium bromide tungstovanadate, n = 4, 8, 16) were presented for the room temperature catalytic oxidation of dibenzothiophene (DBT) and its derivatives. Factors affecting the reaction process, such as the amount of catalyst, oxidant, and temperature, were systematically discussed. C₁₆VW₁₂ showed higher catalytic performance, and 100% conversion and selectivity could be achieved in 50 min with only 10 mg. The mechanism study showed that the hydroxyl radical was the active radical in the reaction. Benefiting from the "polarity strategy", the sulfone product accumulated after 23 cycles in a C₁₆VW₁₂ system, and the yield and purity were about 84% and 100%, respectively.

Protonated g-C3N4 coated Co9S8 heterojunction for photocatalytic H2O2 production

Photocatalytic H₂O₂ production is an eco-friendly technique because only H₂O, molecular O₂ and light are involved. However, it still confronts the challenges of the unsatisfactory productivity of H₂O₂ and the dependence on organic electron donors or high purity O₂, which restrict the practical application. Herein, we construct a type-II heterojunction of the protonated g-C₃N₄ coated Co₉S₈ semiconductor for photocatalytic H₂O₂ production. The ultrathin g-C₃N₄ uniformly spreads on the surface of the dispersed Co₉S₈ nanosheets by a two-step method of protonation and dip-coating, and exhibits improved photogenerated electrons transportability and e^--h⁺ pairs separation ability. The photocatalytic system can achieve a considerable productivity of H₂O₂ to 2.17 mM for 5 h in alkaline medium in the absence of the organic electron donors and pure O₂. The optimal photocatalyst also obtains the highest apparent quantum yield (AQY) of 18.10% under 450 nm of light irradiation, as well as a good reusability. The contribution of the type-II heterojunction is that the migrations of electrons and holes within the interface between g-C₃N₄ and Co₉S₈ matrix promote the separation of photocarriers, and another channel is also opened for H₂O₂ generation. The accumulated electrons in conduction band (CB) of Co₉S₈ contribute to the major channel of two-electron reduction of O₂ for H₂O₂ production. Meanwhile, the electrons in CB of g-C₃N₄ participate in the single electron reduction of O₂ as an auxiliary channel to enhance the H₂O₂ production.

Recent advanced development of metal-loaded mesoporous organosilicas as catalytic nanoreactors

Ordered periodic mesoporous organosilicas have been widely applied in adsorption/separation/sensor technologies and the fields of biomedicine/biotechnology as well as catalysis. Crucially, surface modification with functional groups and metal complexes or nanoparticle loading has ensured high efficacy and efficiency. This review will highlight the current state of design and catalytic application of transition metal-loaded mesoporous organosilica nanoreactors. It will outline prominent synthesis approaches for the grafting of metal complexes, metal salt adsorption and in situ preparation of metal nanoparticles, and summarize the catalytic performance of the resulting mesoporous organosilica hybrid materials. Finally, the potential prospects and challenges of metal-loaded mesoporous organosilica nanoreactors are addressed.