Interaction of low salinity surfactant nanofluids with carbonate surfaces and molecular level dynamics at fluid-fluid interface at ScCO2 loading

Investigation of crude oil properties impact on wettability alteration during low salinity water flooding using an improved geochemical model

In low-salinity water flooding (LSWF), modifying the injected brine composition leads to greater oil recovery from carbonate reservoirs. The processes that control improved recovery during LSWF are not totally clear, which could lead to ambiguities in finding optimum brine composition regarding wettability alteration (WA) toward water wetness. One of the methods to determine WA is bound product sum (BPS) calculation using geochemical tools. In the case of wettability improvement, the BPS value of a crude oil-brine-rock (COBR) system should be at its minimum value. In this study, an improved geochemical model is developed, which includes the effects of oil composition (i.e., acid number, base number, and weight percent of nonhydrocarbon components) and physical properties of oil (i.e., density, viscosity, and solution gas-oil ratio) on COBR interactions. The proposed method generates BPS as a function of temperature, pressure, oil and brine composition, and pH for carbonate rocks. The model applicability was validated using several experimental data sets available in the literature. The results of the improved BPS model were in line with the results of contact angle and zeta potential measurements as the major indices of rock wettability. BPS calculations using the available geochemical tools sometimes failed to predict the correct WA trend since they overlooked the impact of oil properties on COBR interactions. The model predictability was also compared with the results of an available geochemical tool, PHREEQC, and the results demonstrate just how important the effect of oil properties and composition inclusion on wettability determination is. The improved BPS approach could be successfully utilized as an optimization tool to optimize the water composition during LSWF for a given COBR system.

Synergistic Effect of Nanofluids and Surfactants on Heavy Oil Recovery and Oil-Wet Calcite Wettability

In recent years, unconventional oils have shown a huge potential for exploitation. Abundant reserves of carbonate asphalt rocks with a high oil content have been found; however, heavy oil and carbonate minerals have a high interaction force, which makes oil-solid separation difficult when using traditional methods. Although previous studies have used nanofluids or surfactant alone to enhance oil recovery, the minerals were sandstones. For carbonate asphalt rocks, there is little research on the synergistic effect of nanofluids and surfactants on heavy oil recovery by hot-water-based extraction. In this study, we used nanofluids and surfactants to enhance oil recovery from carbonate asphalt rocks synergistically based on the HWBE process. In order to explore the synergistic mechanism, the alterations of wettability due to the use of nanofluids and surfactants were studied. Nanofluids alone could render the oil-wet calcite surface hydrophilic, and the resulting increase in hydrophilicity of calcite surfaces treated with different nanofluids followed the order of SiO2 > MgO > TiO2 > ZrO2 > γ-Al2O3. The concentration, salinity, and temperature of nanofluids influenced the oil-wet calcite wettability, and for SiO2 nanofluids, the optimal nanofluid concentration was 0.2 wt%; the optimal salinity was 3 wt%; and the contact angle decreased as the temperature increased. Furthermore, the use of surfactants alone made the oil-wet calcite surface more hydrophilic, according to the following order: sophorolipid (45.9°) > CTAB (49°) > rhamnolipid (53.4°) > TX-100 (58.4°) > SDS (67.5°). The elemental analysis along with AFM and SEM characterization showed that nanoparticles were adsorbed onto the mineral surface, resulting in greater hydrophilicity of the oil-wet calcite surface, and the roughness was related to the wettability. Surfactant molecules could aid in the release of heavy oil from the calcite surface, which exposes the uncovered calcite surface to its surroundings; additionally, some surfactants adsorbed onto the oil-wet calcite surface, and the combined role made the oil-wet calcite surface hydrophilic. In conclusion, the study showed that hybrid nanofluids showed a better effect on wettability alteration, and the use of nanofluids and surfactants together resulted in synergistic alteration of oil-wet calcite surface wettability.