Highly selective and active Cu-In2O3/C nanocomposite for electrocatalytic reduction of CO2 to CO

Promotional effects of In(PO3)3 on the high catalytic activity of CuO-In(PO3)3/C for the CO2 reduction reaction

The construction of Cu-In bi-component catalysts is an effective strategy to enhance the electrocatalytic properties towards the CO2 reduction reaction (CO2RR). However, realizing the co-promotion of In and heteroatom P on the electrocatalytic performance is still a challenge due to the poor selectivity of metal phosphides. Herein, a novel bi-component catalyst (CuO-In(PO3)3/C) was successfully synthesized via a facile one-pot reaction to realize the integration of Cu, In, and P species for the enhancement of electrocatalysis. In particular, the as-obtained nanorod-like Cu-In(PO3)3/C exhibits superior electrocatalysis towards the CO2RR, with the highest Faraday efficiency of CO (FECO) of 88.5% at -0.586 V. Furthermore, Cu-In(PO3)3/C shows better activity, selectivity, and stability in the CO2RR; in particular, the total current density can reach 178.09 mA cm-2 at -0.886 V in 2.0 M KOH solution when a flow cell is employed. This work provides a reliable method for simplifying the synthesis of novel Cu-based catalysts and exploits the application of heteroatom P in the field of efficient CO2RR.

Elaborate tree-like Cu-Ag clusters from green electrodeposition for efficiently electrocatalyzing CO2 conversion into syngas

The electrocatalytic carbon dioxide reduction (CO2RR) is one of the emerging technologies that can effectively transform carbon dioxide (CO2) into valuable products. Electrocatalysts deriving from green synthesis methods will significantly help to establish a new green carbon cycle. Herein, a green electrodeposition method without additional reducing agents was used to synthesize Cu-Ag bimetallic catalysts, and it is shown that the combination of Cu and Ag obviously affects the morphology of the Cu-Ag catalysts, resulting in the formation of elaborate tree-like Cu-Ag clusters. An as-deposited Cu-Ag/carbon fiber (Cu-Ag/CF) catalyst exhibits high activity, selectivity and stability toward the CO2RR; in particular, the elaborate dendritic Cu-Ag/CF can efficiently reduce CO2 to syngas with high selectivity (Faradaic efficiency (FE) > 95%) at a low onset potential (-0.5 V). This work provides a rational strategy to overcome the significantly different reaction capacities during the reduction of Ag+ and Cu2+, leading to the formation of a controlled morphology of Cu-Ag, which is favourable for the design and development of highly efficient Cu or Ag catalysts via green methods for electrocatalyzing the CO2RR.

N-doped carbon nanocage-anchored bismuth atoms for efficient CO2 reduction

Electrochemical CO2 reduction (CO2RR) is a prospective but challenging method to decrease the CO2 concentration in the current atmosphere; in particular, the poor selectivity of the target product CO and large overpotentials limit its efficiency. Herein, we propose a top-down route to synthesize Bi single atoms (SAs) anchored by N-doped carbon (NCbox) nanoboxes starting from BiOCl nanoplates as the hard templates. In the CO2RR, the obtained Bi single-atom catalyst possesses remarkably-enhanced catalytic performance, achieving a maximal Faraday efficiency (FE) of 91.7% at -0.6 V, which is much higher than that of NCbox-supported Bi nanoparticles (NPs). Further investigations point out that the enhancement can be attributed to the unique coordination structure of the Bi SAs, as well as the fascinating properties of NCbox that can efficiently promote the electron transfer during the electro-catalysis.

Synergistic Modulation between Non-thermal and Thermal Effects in Photothermal Catalysis based on Modified In2O3

To promote the solar-energy cascade utilization, it is necessary to increase the thermal effect of irradiation in the catalytic reactions, while simultaneously augmenting the non-thermal effect, so as to fulfill photothermal coupling. Herein, the non-thermal and thermal effect of light radiation on the surface of In2O3-based catalysts are explored and enhanced by the modification of transition metals Fe and Cu. Optical characterizations combined with water-splitting experiments show that Fe doping greatly broadens the radiation response range and enhances the absorption intensity of semiconductors' intrinsic portion, and Cu doping facilitates the absorption of visible-infrared light. The concurrent incorporation of Fe and Cu offers synergistic benefits, resulting in improved radiation response range, carrier separation and migration, as well as higher photothermal temperature upon photoexcitation. Collectively, these advantages comprehensively enhance the photothermal synergistic water-splitting reactivity. The characterizations under variable temperature conditions have demonstrated that the reaction temperature exerts a significant influence on the process of radiation absorption and conversion, ultimately impacting the non-thermal effect. The results of DFT calculations have revealed that the increasing temperature directly impacts the chemical reaction by reducing the energy barrier associated with the rate-determining step. These findings shine new light on the fundamental mechanisms underlying non-thermal and thermal effect, while also imparting significant insights for photo-thermal-coupled catalyst designing.

Poly(ionic liquid) nanovesicles via polymerization induced self-assembly and their stabilization of Cu nanoparticles for tailored CO2 electroreduction

Herein, we report a straightforward, scalable synthetic route towards poly(ionic liquid) (PIL) homopolymer nanovesicles (NVs) with a tunable particle size of 50 to 120 nm and a shell thickness of 15 to 60 nm via one-step free radical polymerization induced self-assembly. By increasing monomer concentration for polymerization, their nanoscopic morphology can evolve from hollow NVs to dense spheres, and finally to directional worms, in which a multilamellar packing of PIL chains occurred in all samples. The transformation mechanism of NVs' internal morphology is studied in detail by coarse-grained simulations, revealing a correlation between the PIL chain length and the shell thickness of NVs. To explore their potential applications, PIL NVs with varied shell thickness are in situ functionalized with ultra-small (1 ∼ 3 nm in size) copper nanoparticles (CuNPs) and employed as electrocatalysts for CO₂ electroreduction. The composite electrocatalysts exhibit a 2.5-fold enhancement in selectivity towards C₁ products (e.g., CH₄), compared to the pristine CuNPs. This enhancement is attributed to the strong electronic interactions between the CuNPs and the surface functionalities of PIL NVs. This study casts new aspects on using nanostructured PILs as new electrocatalyst supports in CO₂ conversion to C₁ products.

Two Novel Schiff Base Manganese Complexes as Bifunctional Electrocatalysts for CO2 Reduction and Water Oxidation

One mononuclear Mn(III) complex [Mn^IIIL(H₂O)(MeCN)](ClO₄) (1) and one hetero-binuclear complex [(Cu^IILMn^II(H₂O)₃)(Cu^IIL)₂](ClO₄)₂·CH₃OH (2) have been synthesized with the Schiff base ligand (H₂L = N,N'-bis(3-methoxysalicylidene)-1,2-phenylenediamine). Single crystal X-ray structural analysis manifests that the Mn(III) ion in 1 has an octahedral coordination structure, whereas the Mn(II) ion in 2 possesses a trigonal bipyramidal configuration and the Cu(II) ion in 2 is four-coordinated with a square-planar geometry. Electrochimerical catalytic investigation demonstrates that the two complexes can electrochemically catalyze water oxidation and CO₂ reduction simultaneously. The coordination environments of the Mn(III), Mn(II), and Cu(II) ions in 1 and 2 were provided by the Schiff base ligand (L) and labile solvent molecules. The coordinately unsaturated environment of the Cu(II) center in 2 can perfectly facilitate the catalytic performance of 2. Complexes 1 and 2 display that the over potentials for water oxidation are 728 mV and 216 mV, faradaic efficiencies (FEs) are 88% and 92%, respectively, as well as the turnover frequency (TOF) values for the catalytic reduction of CO₂ to CO are 0.38 s^-1 at -1.65 V and 15.97 s^-1 at -1.60 V, respectively. Complex 2 shows much better catalytic performance for both water oxidation and CO₂ reduction than that of complex 1, which could be owing to a structural reason which is attributed to the synergistic catalytic action of the neighboring Mn(III) and Cu(II) active sites in 2. Complexes 1 and 2 are the first two compounds coordinated with Schiff base ligand for both water oxidation and CO₂ reduction. The finding in this work can offer significant inspiration for the future development of electrocatalysis in this area.

Triple-Phase Interface Engineering over an In2O3 Electrode to Boost Carbon Dioxide Electroreduction

The electrocatalytic reduction of CO₂ is deemed to be a promising method to ease environmental and energy issues. However, achieving high efficiency and selectivity of CO₂ electroreduction remains a bottleneck due to huge limitation of CO₂ mass transfer and competition of hydrogen evolution reaction (HER) in aqueous solution. In this work, we propose to utilize triple-phase interface engineering over an In₂O₃ electrode to enhance its CO₂ reduction reaction (CO₂RR) performance. Notably, distinguishing from other research studies (doping, defect introduction, and heterojunction construction) that regulate the nature of In₂O₃-based catalysts themselves, we herein tune interfacial wettability of In₂O₃ using facile fluoropolymer coating for the first time. In contrast to the hydrophilic In₂O₃ electrode [Faraday efficiency (FE)_HCOOH ∼ 62.7% and FE_H2 ∼ 24.1% at -0.67 V versus RHE], the hydrophobic fluoropolymer (taking polyvinylidene fluoride as an example)-coated In₂O₃ electrode delivers a significantly enhanced FE_HCOOH of 82.3% and a decreased FE_H2 of 5.7% at the same potential. Upon combining contact angle measurements, density functional theory calculation, and ab initio molecular dynamics simulation, the enhanced CO₂RR performance is revealed to be attributed to the rich triple-phase interfaces formed after fluoropolymer coating as an "aerophilic sponge", which increases the local concentration of CO₂ near In₂O₃ active sites to improve CO₂ reduction and meanwhile reduces the accessible water molecules to suppress competitive HER. This work presents a feasible approach for the enhanced selectivity of HCOOH yield over In₂O₃ by triple-phase interface engineering, which also provides a convenient and effective method for developing other materials used in gas-consumption reactions.

Carbonized wood membrane decorated with AuPd alloy nanoparticles as an efficient self-supported electrode for electrocatalytic CO2 reduction

Efficient electrocatalytic reduction of CO₂ to value-added chemicals and fuels is a promising technology for mitigating energy shortage and pollution issues yet highly relay on the development of high-performance electrocatalysts. Herein, we develop an effective strategy to fabricate carbonized wood membrane (CW) decorated with AuPd alloy nanoparticles with tunable composition (termed as AuPd@CW) as self-supported electrodes for efficient electrocatalytic CO₂ reduction. The uniformly distributed AuPd nanoparticles on wood matrix are first achieved through the in-situ reduction of metal cations by the lignin content in wood. Subsequently, two-step carbonization was employed to promote the alloying of AuPd nanoparticles and the formation of CW. The AuPd@CW membrane electrode features an integrated macroscopic structure with numerous open and aligned channels for rapid electron transfer and mass diffusion and well-dispersed AuPd alloy nanoparticles as active sites for the CO₂ reduction. The optimal Au₉₅Pd₅@CW electrode affords a high selectivity for CO₂ electroreduction with a maximum CO faradaic efficiency (FE_CO) of 82% at an overpotential of 0.49 V, much higher than those obtained on Au@CW and Pd@CW electrodes. The CO current density and FE_CO remain relatively stable during a 12 h electrolysis reaction. In addition, density functional theory (DFT) calculations reveal that alloying Au with Pd enables a balance between the formation of intermediate COOH* and the desorption of CO on the surface of AuPd nanoparticles, thus enhancing the selectivity of CO production. This work offers an effective strategy for the fabrication of bimetallic alloys supported on wood-based carbon membrane as a practical electrode for electrochemical energy conversion.