Effect of non-ionic surfactants on the adsorption of polycyclic aromatic compounds at water/oil interface: A molecular simulation study

Advancing oil-water separation: Design and efficiency of amphiphilic hyperbranched demulsifiers

HYPOTHESIS

An innovative strategy for designing high-performance demulsifiers is proposed. It hypothesizes that integrating mesoscopic molecular simulations with macroscopic physicochemical experiments can enhance the understanding and effectiveness of demulsifiers. Specifically, it is suggested that amphiphilic hyperbranched polyethyleneimine (CHPEI) could act as an efficient demulsifier in oil-water systems, with its performance influenced by its adsorption behaviors at the oil-water interface and its ability to disrupt asphaltene-resin aggregates.

EXPERIMENTS

Several coarse-grained models of oil-water systems, with CHPEI, are constructed using dissipative particle dynamics (DPD) simulation. Following the insights gained from the simulations, a series of CHPEI-based demulsifiers are designed and synthesized. Demulsification experiments are conducted on both simulated and crude oil emulsions, with the process monitored using laser scanning confocal microscopy. Additionally, adsorption kinetics and small angle X-ray scattering are employed to reveal the inherent structural characteristics of CHPEI demulsifiers.

FINDINGS

CHPEI demonstrates over 96.7 % demulsification efficiency in high acid-alkali-salt systems and maintains its performance even after multiple reuse cycles. The simulations and macroscopic experiments collectively elucidate that the effectiveness of a demulsifier is largely dependent on its molecular weight and the balance of hydrophilic and hydrophobic groups. These factors are crucial in providing sufficient interfacial active functional groups while avoiding adsorption sites for other surfactants. Collaborative efforts between DPD simulation and macroscopic measurements deepen the understanding of how demulsifiers can improve oil-water separation efficiency in emulsion treatment.

Molecular dynamics simulations of the interfacial behaviors and photo-oxidation of phytosterol under different emulsion oil content

Phytosterol, recognized for its health benefits, is predominantly extracted from plants and exhibits significantly reduced stability under varying light conditions. Their photooxidation is significantly influenced by emulsion interfaces. This study examined the mechanism of interface structure on phytosterol photooxidation with unparalleled molecular precision, utilizing molecular dynamics simulations and experimental procedures. Hydrogen bonding between the hydroxyl group at the C3 position of phytosterols and water molecules, coupled with van der Waals forces between the hydrophobic regions and the oil phase, induced phytosterol molecules to disperse toward the interface. The elevated polarity of the oil phase, specifically in tributyrin, facilitated the permeation of water molecules into the oil phase. This was achieved by diminishing the emulsion's interfacial tension, thereby fostering the development of more interface or micelles, and accelerating the photooxidation process of phytosterols. These simulations unraveled that the preponderance of phytosterol distribution is localized and oxidized at the oil-water interface.

Maximizing oil recovery: Innovative chemical EOR solutions for residual oil mobilization in Kazakhstan's waterflooded sandstone oilfield

The results of an experimental study to design a chemical flood scheme for a massive Kazakhstani oilfield with high water cut are presented in this paper. A meticulously formulated chemical flooding procedure entails injecting a blend comprising interfacial tension (IFT) reducing agents, alkaline/nanoparticles to control chemical adsorption, and polymer to facilitate mobility control. Overall, this well-conceived approach leads to a significant enhancement in the mobilization and production of residual oil. Experiments were conducted in Kazakhstan's Field A, one of the country's oldest oilfields with over 90% water cut and substantial remaining oil, to assess the efficiency of various hydrolyzed polyacrylamide (HPAM) derived polymers and surfactant solutions. Additionally, the effectiveness of alkaline and nanoparticles in minimizing chemical adsorption for the screened surfactant and polymer was investigated. These assessments were conducted under reservoir conditions, with a temperature of 63 °C, and using 13,000 ppm Caspian seawater as makeup brine. The performance assessment of the selected chemicals was carried out through a set of oil displacement tests on reservoir cores. Critical parameters, including chemical adsorption, interfacial tension, resistance factor, and oil recovery factor, were compared to determine the most effective chemical flooding approach for Field A. Both the surfactant-polymer (SP) and alkali-surfactant-polymer (ASP) approaches were more successful in recovering residual oil by efficiently generating and delivering microemulsion, producing more than 90% of the remaining oil after waterflooding. Due to the low increase in recovery compared to SP and the complexity of applying ASP at the field scale, SP was recommended for the pilot test studies. This investigation underscores that the choice of chemicals is contingent upon the interplay between the specific characteristics of the oil, the geological formation, the injection water, and the reservoir rock. Consequently, assessing all potential configurations on reservoir cores is imperative to identify the most optimal chemical combination. The practical challenges at the field scale should also be considered for the final decision. The results of this study contribute to the successful design and implementation of tailored chemical flooding to challenging oilfields with excessive water cut and high residual oil.

Insights into Zwitterionic Surfactant Interactions at the Oil-Water Interface by Interferometry Experiments and MDS Calculations

In this work, the interaction performance of zwitterionic surfactant [dodecyl dimethyl sulfopropyl betaine (DSB-12) and hexadecyl dimethyl sulfopropyl betaine (DSB-16)] at the n-octadecane oil surface is investigated from experimental and simulation insights. For a macroscopic experiment, interfacial interferometry technology was developed for real-time monitor interaction performances and to obtain the quantitative interfacial thickness and mass results. The Langmuir model was characterized by thermodynamic analysis, deducing the aggregation spontaneity of DSB-16 > DSB-12 with ΔGagg(DSB-16) = -5.94 kJ mol-1 < ΔGagg(DSB-12) = 24.08 kJ mol-1. A three-step dynamic model (adsorption, arrangement, and aggregation) was characterized by kinetic analysis, indicating arrangement process as slow-limiting step with k2(arr) < k1(ads), k3(agg). For microscopic simulation, and molecular dynamic (MD) method was utilized to theoretically investigate interaction performances and obtain the interfacial configuration and energy results. The interaction stability and interaction strength were indicated to be DSB-16 > DSB-12 with differences of final energy ΔEfin = 48-88 kcal mol-1. The interaction mechanism was explained by proposing the model of "response enhancement" and "deposition activity" for DSB-16 interactions, and "response decrease" and "elution activity" for DSB-12 interactions. The different performances can be attributed to the different interaction forms and forces of surfactants. This work provided a platform for performance and mechanism investigation between the surfactant molecule and oil surface, which is of great significance in reservoir exploitation and enhanced oil recovery (EOR).

A Novel Demulsifier with Strong Hydrogen Bonding for Effective Breaking of Water-in-Heavy Oil Emulsions

In the heavy petroleum industry, the development of efficient demulsifiers for the effective breaking of interfacially active asphaltenes (IAA)-stabilized water-in-heavy oil (W/HO) emulsions is a highly attractive but challenging goal. Herein, a novel nitrogen and oxygen containing demulsifier (JXGZ) with strong hydrogen bonding has been successfully synthesized through combining esterification, polymerization and amidation. Bottle tests indicated that JXGZ is effectual in quickly demulsifying the IAA-stabilized W/HO emulsions; complete dehydration (100%) to the emulsions could be achieved in 4 min at 55 °C using 400 ppm of JXGZ. In addition, the effects of demulsifier concentration, temperature and time on the demulsification performance of JXGZ are systematically analyzed. Demulsification mechanisms reveal that the excellent demulsification performance of JXGZ is attributed to the strong hydrogen bonding between JXGZ and water molecules (dual swords synergistic effect under hydrogen bond reconstruction). The interaction of the "dual swords synergistic effect" generated by two types of hydrogen bonds can quickly break the non-covalent interaction force (π-π stacking, Van der Waals force, hydrogen bonds) of IAA at the heavy oil-water interface, quickly promote the aggregation and coalescence of water molecules and finally achieve the demulsification of W/HO emulsions. These findings indicate that the JXGZ demulsifier shows engineering application prospects in the demulsification of heavy oil-water emulsions, and this work provides the key information for developing more efficient chemical demulsifiers suitable for large-scale industrial applications.

Molecular Simulations on the Coalescence of Water-in-Oil Emulsion Droplets with Non-ionic Surfactant and Model Asphaltene

Water droplets in crude oil can be stabilized by the adsorption of interfacially active components, such as asphaltenes. Demulsifiers like non-ionic surfactants are commonly used to destabilize the water-in-oil emulsions. In this work, molecular dynamics simulations and free energy calculations were performed to study the coalescence of water droplets coated with both model asphaltene and non-ionic surfactants [PEO-PPO-PEO copolymer (SurP) or Brij surfactant (SurB)]. For the first time, we quantitatively studied the interaction force between water droplets in the presence of both asphaltenes and demulsifiers and addressed the effect of solvent property on the coalescence process. At the droplet surface, demulsifiers adsorbed closer to the water phase and formed more hydrogen bonds with water molecules compared to asphaltenes, indicating the capability of demulsifiers to break the asphaltene film. Comparing the two non-ionic surfactants, VO-79/SurP complexes formed a single-layer film on the droplet surface, while a two-layer structure was formed by VO-79/SurB complexes. This led to a higher repulsive force during droplet coalescence when SurB was present, regardless of the type of solvent. Comparing the two different solvents (toluene vs heptane), for the same adsorbates, the interfacial film was more compact in heptane and there were fewer dispersed VO-79. For VO-79/SurB adsorbates, the bridging of VO-79 led to a smaller repulsion during droplet coalescence when the solvent was heptane, while the difference is insignificant for VO-79/SurP adsorbates. This work suggests that the energy barrier and interaction force for droplet coalescence is highly dependent on the structure of interfacial films, thus providing atomic-level insights into the demulsification mechanisms of water-in-oil emulsions in the presence of surface-active asphaltenes.

Chirality Discrimination at Binary Organic|Water Interfaces Monitored by Interfacial Tension Measurements with Preliminary Comparison with Molecular Dynamics Simulations

Chirality discrimination at a binary toluene (organic)/water(aqueous) interface between R- or S-Tol-BINAP (2,2'-Bis(di-p-tolylphosphino)-1,1'-binaphthyl) molecules and the water-soluble serine chiral specie is examined for the first time, using a combination of interfacial tension measurements and molecular dynamic simulations. Experimental interfacial measurements exhibit a clear chirality-controlled difference when a homochiral versus a heterochiral enantiomeric pairs are introduced at the interfaces. The related molecular dynamics simulations support the experimental results and provide further molecular insight of intermolecular interactions at the interfaces. The results indicate that interfacial tension measurements can capture the preferential interactions which exist between different pairs of enantiomers at the binary interfaces, opening up a new way for probing chirality discrimination at liquid-liquid interfaces.

Current and emerging trends in bioaugmentation of organic contaminated soils: A review

Organic contaminated soils constitute an important environmental problem, whereas field applicability of existing physical-chemical methods has encountered numerous obstacles, such as high chemical cost, large energy consumption, secondary pollution, and soil degradation. Bioaugmentation is an environmentally friendly and potentially economic technology that efficiently removes toxic pollutants from organic contaminated soils by microorganisms or their enzymes and bioremediation additives. This review attempted to explore the recent advances in bioaugmentation of organic contaminated soils and provided a comprehensive summary of various bioaugmentation methods, including bacterial, fungus, enzymes and bioremediation additives. The practical application of bioaugmentation is frequently limited by soil environmental conditions, microbial relationships, enzyme durability and remediation cycles. To tackle these problems, the future of bioaugmentation can be processed from sustainability of broad-spectrum bioremediation carriers, microbial/enzyme agents targeting combined contaminants, desorption of environmentally friendly additives and small molecular biological stimulants. Findings of this research are expected to provide new references for bioaugmentation methods that are practically feasible and economically potential.

Wetting Properties of Clathrate Hydrates in the Presence of Polycyclic Aromatic Compounds: Evidence of Ion-Specific Effects

Polycyclic aromatic hydrocarbons (PAHs) have attracted remarkable multidisciplinary attention due to their intriguing π-π stacking configurations, showing enormous opportunity for their use in a variety of advanced applications. To secure progress, detailed knowledge on PAHs' interfacial properties is required. Employing molecular dynamics, we probe the wetting properties of brine droplets (KCl, NaCl, and CaCl₂) on sII methane-ethane hydrate surfaces immersed in various oil solvents. Our simulations show synergistic effects due to the presence of PAHs compounded by ion-specific effects. Our analysis reveals phenomenological correlations between the wetting properties and a combination of the binding free-energy difference and entropy changes upon oil solvation for PAHs at oil/brine and oil/hydrate interfaces. The detailed thermodynamic analysis conducted upon the interactions between PAHs and various interfaces identifies molecular-level mechanisms responsible for wettability alterations, which could be applicable for advancing applications in optics, microfluidics, biotechnology, medicine, as well as hydrate management.

Molecular dynamics simulation on water/oil interface with model asphaltene subjected to electric field

HYPOTHESIS

The droplet-medium interfaces of petroleum emulsions are often stabilized by the indigenous surface-active compounds (e.g., asphaltenes), causing undesired issues. While demulsification by electric field is a promising technique, fundamental study on the droplet-medium interface influenced by electric field is limited. Molecular dynamics (MD) simulations are expected to provide microscopic insights into the nano-scaled water/oil interface.

METHODS

MD simulations are conducted to study the adsorption of model asphaltene molecules (represented by N-(1-hexylheptyl)-N'-(5-carboxylicpentyl) perylene-3,4,9,10-tetracarboxylic bisimide (C5Pe)) on a water-toluene interface under various strengths of electric field. The adsorption amount and structural feature of C5Pe molecules at water-toluene interface are investigated, and the effects of electric field and salt are discussed.

FINDINGS

C5Pe molecules tend to adsorb on the water-oil interface. As the electric field strength increases, the adsorption amount first slightly increases (or remains constant) and then decreases. The electric field disrupts the compact π-π stacking between C5Pe molecules and increases their mobility, causing a dispersed distribution of the molecules with a wide range of orientations relative to the interface. Within the studied range, the addition of salt ions appears to stabilize the interface at high electric field. These results provide useful insights into the mechanism and feasibility of demulsification under electric field.

Mussel-inspired polyethylene glycol coating for constructing antifouling membrane for water purification

HYPOTHESIS

Polyethylene glycol (PEG) holds considerable potential in the fabrication of antifouling surfaces due to its strong hydration property. However, anchoring PEG polymer as a stable surface coating is still challenging because of its weak surface bonding property. Inspired by the mussel adhesion strategy, it is hypothesized that PEG polymer can be robustly attached onto substrates with the assistance of a "bio-glue" layer.

EXPERIMENTS

The "bio-glue" layer composited of Levodopa/polyethyleneimine (LP) is firstly deposited onto substrates, followed by covalently anchoring the poly(ethylene glycol) diglycidyl ether (PEGDE) layer via ring-opening reaction. The antifouling property of as-prepared coating was characterized using several techniques including quartz crystal microbalance (QCM) and surface forces apparatus (SFA). Furthermore, the PEGDE/LP coating was applied in membrane functionalization for oil-in-water (O/W) emulsion separation.

FINDINGS

PEGDE/LP coating shows outstanding stability and superior antifouling properties towards various potential foulants. In the O/W emulsion separation process, the PEGDE/LP-coated membrane maintains its super-hydrophilic property under harsh solution conditions and achieves high water flux (∼3000 L m^-2 h^-1 bar^-1) and 90% water flux recovery ratio for separation of O/W emulsions containing different bio-foulants. This coating strategy provides a promising approach for fabricating stable coating with outstanding antifouling properties in various environmental engineering applications.

Reversible assembly of silica nanoparticles at water-hydrocarbon interfaces controlled by SDS surfactant

Achieving reversible and tunable assembly of silica nanoparticles at liquid-liquid interfaces is vital for a wide range of scientific and technological applications including sustainable subsurface energy applications, catalysis, drug delivery and material synthesis. In this study, we report the mechanisms controlling the assembly of silica nanoparticles (dia. 50 nm and 100 nm) at water-heptane and water-toluene interfaces using sodium dodecyl sulfate (SDS) surfactant with concentrations ranging from 0.001-0.1 wt% using operando ultrasmall/small-angle X-ray scattering, cryogenic scanning electron microscopy imaging and classical molecular dynamics simulations. The results show that the assembly of silica nanoparticles at water-hydrocarbon interfaces can be tuned by controlling the concentrations of SDS. Silica nanoparticles are found to: (a) dominate the interfaces in the absence of interfacial SDS molecules, (b) coexist with SDS at the interfaces at low surfactant concentration of 0.001 wt% and (c) migrate toward the aqueous phase at a high SDS concentration of 0.1 wt%. Energetic analyses suggest that the van der Waals and electrostatic interactions between silica nanoparticles and SDS surfactants increase with SDS concentration. However, the favorable van der Waals and electrostatic interactions between the silica nanoparticles and toluene or heptane decrease with increasing SDS concentration. As a result, the silica nanoparticles migrate away from the water-hydrocarbon interface and towards bulk water at higher SDS concentrations. These calibrated investigations reveal the mechanistic basis for tuning silica nanoparticle assembly at complex interfaces.

Unraveling the Interaction of Water-in-Oil Emulsion Droplets via Molecular Simulations and Surface Force Measurements

Water-in-oil emulsions widely exist in various chemical and petroleum engineering processes, and their stabilization and destabilization behaviors have attracted much attention. In this work, molecular dynamic (MD) simulations were conducted on the water-in-oil emulsion droplets with the presence of surface-active components, including a polycyclic aromatic compound (VO-79) and two nonionic surfactants: the PEO₅PPO₁₀PEO₅ triblock copolymer and Brij-93. At the surface of water droplets, films were formed by the adsorbate molecules that redistributed during the approaching of the droplets. The redistribution of PEO₅PPO₁₀PEO₅ was more pronounced than that of Brij-93 and VO-79, which contributed to lower repulsion during coalescence. The interaction forces during droplet coalescence were also measured using atomic force microscopy. Jump-in phenomenon and coalescence were observed for systems with VO-79, Brij-93, and a low concentration of Pluronic P123. The critical force before jump-in was lowest for the low concentration of Pluronic P123, consistent with the MD results. Adhesion was measured when separating water droplets with a high concentration of Pluronic P123. By correlating theoretical simulations and experimental force measurements, this work improves the fundamental understanding on the interaction behaviors of water droplets in an oil medium in the presence of interface-active species and provides atomic-level insights into the stabilization and destabilization mechanisms of water-in-oil emulsion.