Superior photoelectrocatalytic performance of ternary structural BiVO4/GQD/g-C3N4 heterojunction

Unlocking enhanced photocatalytic power: Donor-acceptor synergy in non-metallic g-C3N4 hollow nanospheres

Selecting safe, non-toxic, and non-metallic semiconductor materials that facilitate the degradation of pollutants in water stands out as an optimal approach to combat environmental pollution. Herein, graphitic carbon nitride (g-C3N4)-based hollow nanospheres nonmetallic photocatalyst modified with covalent organic framework materials named TpMA, based on 1, 3, 5-trimethylchloroglucuronide (Tp) and melamine (MA), was successfully synthesized (abbreviated as CNTP). The ordered electron donor-acceptor structure inherent in TpMA contributed to enhancing the transport efficiency of photogenerated carriers in CNTP. The CNTP photocatalysts exhibited excellent performance in degrading rhodamine B and tetracycline in visible light, with optimal degradation rates reached more than 90% in 60 and 80 min, respectively, which were 5.3 and 3.0 times higher than those of pure CNNS. The increased photocatalytic efficiency observed in CNTP composites could be traced back to the covalently connection between the two molecules, forming a π-conjugated system that facilitated the separative efficiency of photogenerated electron-hole pairs and intensified the utilization of visible light. This study provided a new means to design and fabricate highly efficient and environmentally friendly non-metallic photocatalytic materials.

Two-Dimensional Layered Heterojunctions for Photoelectrocatalysis

Two-dimensional (2D) layered nanomaterial heterostructures, arising from the combination of 2D materials with other low-dimensional species, feature a large surface area to volume ratio, which provides a high density of active sites for catalytic applications and for (photo)electrocatalysis (PEC). Meanwhile, their electronic band structure and high electrical conductivity enable efficient charge transfer (CT) between the active material and the substrate, which is essential for catalytic activity. In recent years, researchers have demonstrated the potential of a range of 2D material interfaces, such as graphene, graphitic carbon nitride (g-C3N4), metal chalcogenides (MCs), and MXenes, for (photo)electrocatalytic applications. For instance, MCs such as MoS2 and WS2 have shown excellent catalytic activity for hydrogen evolution, while graphene and MXenes have been used for the reduction of carbon dioxide to higher value chemicals. However, despite their great potential, there are still major challenges that need to be addressed to fully realize the potential of 2D materials for PEC. For example, their stability under harsh reaction conditions, as well as their scalability for large-scale production are important factors to be considered. Generating heterojunctions (HJs) by combining 2D layered structures with other nanomaterials is a promising method to improve the photoelectrocatalytic properties of the former. In this review, we inspect thoroughly the recent literature, to demonstrate the significant potential that arises from utilizing 2D layered heterostructures in PEC processes across a broad spectrum of applications, from energy conversion and storage to environmental remediation. With the ongoing research and development, it is likely that the potential of these materials will be fully expressed in the near future.

Extrinsic Pseudocapacitive NiSe/rGO/g-C3N4 Nanocomposite for High-Performance Hybrid Supercapacitors

Battery-type materials with ultrahigh energy density show great potential for hybrid supercapacitors (HSCs). In this work, we have developed a nickel selenide (NiSe)/reduced graphene oxide (rGO)/graphitic carbon nitride (g-C3N4) ternary composite as a promising positive electrode for hybrid supercapacitors (HSCs). The extended π-conjugated planar layers of g-C3N4 promote strong interconnectivity with rGO, which further enhances surface area, surface free energy, and efficient electron/ionic path. Additionally, it establishes clear ion diffusion pathways, serving as ion reservoirs during charge and discharge and facilitating efficient redox reactions. As a result, the NiSe/g-C3N4/rGO nanocomposite electrode displayed a specific capacity of 412.6 mA h g-1 at 1 A g-1. Later, the HSC device was assembled using the nanocomposite as the positive electrode and activated carbon as the negative electrode, which delivered an energy density of 65.2 Wh kg-1 at a power density of 750 W kg-1. Notably, the HSC device maintained excellent cyclic stability, preserving 93.3% of its initial performance and Coulombic efficiency of 86.6% for 10,000 charge-discharge cycles at 5 A g-1. These findings underscore the potential utility of NiSe/g-C3N4/rGO as a versatile and effective electrode material for the strategic development of HSC devices.

Facile synthesis of multi-layer Co(OH)2/CeO2-g-C3N4 ternary synergistic heterostructure for efficient photocatalytic oxidation of NO under visible light

In this work, we report a one-step synthesis of ternary Z-scheme Co(OH)2/CeO2-g-C3N4 (CoCe-CN) heterostructure via hydrothermal method. Owing to the modification of Co(OH)2 and CeO2, the existence of Co(OH)2 as an electron acceptor-donor center between CeO2 and g-C3N4 accelerates the electron transfer and provides extra OH- reaction pathway for photocatalytic oxidation of NO. As a result, 50CoCe-CN (Co and Ce accounting for 25% mass ratio separately) achieved a 53.5% conversion efficiency of NO at 600 ppb concentration, which is 1.82 times that of g-C3N4 under visible light. The results of the DFT analysis and element distribution of cobalt and ceria provide convincing evidence supporting the existence of a novel multi-layer structure in the CoCe-CN photocatalyst. This structure involves the loading of CeO2 and Co(OH)2 on the g-C3N4 surface, and Co(OH)2 as a co-catalyst introduced between CeO2 and g-C3N4 realizes the synergy between CeO2 and Co(OH)2 which further improve the photocatalytic properties. The higher photocatalytic efficiencies observed in the CoCe-CN photocatalysts compared to those containing only cobalt (Co-CN) or ceria (Ce-CN) provide further evidence of the synergistic effect of these two elements. This work demonstrates a more efficient and effective ternary photocatalytic system, with greater practical potential for photocatalytic oxidation of NO.

Unleashing the power of solar light: WO3 nanorods decorated onto BiVO4 dendrites for tetracycline detoxification and water splitting

The coupling of different oxide materials in a nanohybrid enables the customization of their optical and charge transport properties, leading to improved interfacial charge segregation and migration. In this study, BiVO4/WO3 (BVW), a sunlight-driven photocatalyst with distinct mole ratios was synthesized via a facile hydrothermal approach. The resultant catalyst exhibits a nanorods shape morphology decorated onto dendrite-like matrix and is studied for photocatalytic elimination of tetracycline (TC) and photoelectrocatalytic (PEC) H2 production. The effect of illumination time, solution pH, photocatalyst concentration, and mole ratios of BiVO4 to WO3 on the photocatalytic abatement of TC were tested sequentially as effective operating factors. Under optimal condition, 3:1 BiVO4:WO3 (31BVW) nanohybrid demonstrated a maximum degradation efficacy of 96.2% (rate constant ~0.0241 min-1), which is much better than its individual components and commercial TiO2-P25 (50.9%). The resultant by-products of TC decomposition were analyzed using GC-MS to explain the degradation mechanism. Moreover, as a photoanode, 31BVW showed a high photocurrent density of 0.64 mA/cm2 at 1.23 V vs RHE and a steady photocurrent for ~6 h under chronoamperometry study at1.23 V vs RHE. However, bare BiVO4 and WO3 exhibited the photocurrent density of 0.001 mA/cm2, and 0.015 mA/cm2, respectively at 1.23 V vs RHE. The Mott-Schottky analysis of 31BVW confirms their n-type behavior, with a calculated flat band potential of -0.067 V. The hydrogen production rate was theoretically calculated as 4.56 mmolcm-2 s-1 from chronoamperometric measurements. The photocatalyst's efficacy in TC degradation was further established via its reusability upto 7 cycles. Post degradation characterization of catalyst confirms its stability in lieu of practical usage. Comparative studies with existing literature revealed the superiority of reported photocatalysts in both applications. Overall, the binary BVW photocatalyst shows great potential for removing detrimental contaminants as well as H2 production via PEC water splitting due to efficient charge separation, reduced recombination, high surface area, and widen absorption window of the nanohybrid.

The Collision between g-C3 N4 and QDs in the Fields of Energy and Environment: Synergistic Effects for Efficient Photocatalysis

Recently, graphitic carbon nitride (g-C₃ N₄ ) has attracted increasing interest due to its visible light absorption, suitable energy band structure, and excellent stability. However, low specific surface area, finite visible light response range (<460 nm), and rapid photogenerated electron-hole (e^- -h⁺ ) pairs recombination of the pristine g-C₃ N₄ limit its practical applications. The small size of quantum dots (QDs) endows the properties of abundant active sites, wide absorption spectrum, and adjustable bandgap, but inevitable aggregation. Studies have confirmed that the integration of g-C₃ N₄ and QDs not only overcomes these limitations of individual component, but also successfully inherits each advantage. Encouraged by these advantages, the synthetic strategies and the fundamental of QDs/g-C₃ N₄ composites are briefly elaborated in this review. Particularly, the synergistic effects of QDs/g-C₃ N₄ composites are analyzed comprehensively, including the enhancement of the photocatalytic performance and the avoidance of aggregation. Then, the photocatalytic applications of QDs/g-C₃ N₄ composites in the fields of environment and energy are described and further combined with DFT calculation to further reveal the reaction mechanisms. Moreover, the stability and reusability of QDs/g-C₃ N₄ composites are analyzed. Finally, the future development of these composites and the solution of existing problems are prospected.

Effect of MXene Loaded on g-C3N4 Photocatalyst for the Photocatalytic Degradation of Methylene Blue

Photocatalytic degradation is one of the environmentally friendly methods used in treating dye wastewater. In this study, a series of MXene/g-C3N4 heterostructure photocatalysts with different loading amounts of MXene (1, 4, 8, and 12 wt.%) were successfully synthesized via the wet impregnation method and their photocatalytic activity was evaluated via the degradation of methylene blue under visible-light irradiation. As such, the 1 wt.% MXene/g-C3N4 heterostructure photocatalyst achieved a high degradation of methylene blue compared to the pure g-C3N4 under visible-light illumination of 180 min. This significant improvement was attributed to the intimate interfacial contact, evidently from the FESEM analysis, which allows the smooth photocharge carriers to transport between g-C3N4 and MXene. Additionally, the larger BET surface area demonstrated by the 1 wt.% MXene/g-C3N4 heterostructure allowed this sample to have higher adsorption of dye molecules and provided a higher number of reactive sites, which was beneficial for the enhancement of the photocatalytic activity. Nevertheless, it was found that the excessive loading of MXene can substantially impede photocatalytic activity. This was attributed to the decrease in the active sites, as well as the weakened crystallinity of the MXene/g-C3N4 heterostructure photocatalyst, evident from the FTIR and XRD analysis. All in all, this study has shown the potential of the MXene/g-C3N4 photocatalyst as a promising photocatalyst for highly efficient wastewater treatment applications.

Comparative study of BiVO4 and BiVO4/Ag2O regarding their properties and photocatalytic degradation mechanism

Schematic diagram of the photocatalytic mechanism under visible light.

Recent advances in graphite carbon nitride-based nanocomposites: structure, antibacterial properties and synergies

Bacterial infections and transmission threaten human health and well-being. Graphite carbon nitride (g-C₃N₄), a promising photocatalytic antibacterial nanomaterial, has attracted increasing attention to combat bacterial transmission, due to the outstanding stability, high efficiency and environmental sustainability of this material. However, the antibacterial efficiency of g-C₃N₄ is affected by several factors, including its specific surface area, rapid electron/hole recombination processes and optical absorption properties. To improve the efficiency of the antibacterial properties of g-C₃N₄ and extend its range of applications, various nanocomposites have been prepared and evaluated. In this review, the advances in amplifying the photocatalytic antibacterial efficiency of g-C₃N₄-based nanocomposites is discussed, including different topologies, noble metal decoration, non-noble metal doping and heterojunction construction. The enhancement mechanisms and synergistic effects in g-C₃N₄-based nanocomposites are highlighted. The remaining challenges and future perspectives of antibacterial g-C₃N₄-based nanocomposites are also discussed.

An Overview of the Recent Progress in Polymeric Carbon Nitride Based Photocatalysis

Recently, polymeric carbon nitride (g-C₃ N₄ ) as a proficient photo-catalyst has been effectively employed in photocatalysis for energy conversion, storage, and pollutants degradation due to its low cost, robustness, and environmentally friendly nature. The critical review summarized the recent development, fundamentals, nanostructures design, advantages, and challenges of g-C₃ N₄ (CN), as potential future photoactive material. The review also discusses the latest information on the improvement of CN-based heterojunctions including Type-II, Z-scheme, metal/CN Schottky junctions, noble metal@CN, graphene@CN, carbon nanotubes (CNTs)@CN, metal-organic frameworks (MOFs)/CN, layered double hydroxides (LDH)/CN heterojunctions and CN-based heterostructures for H₂ production from H₂ O, CO₂ conversion and pollutants degradation in detail. The optical absorption, electronic behavior, charge separation and transfer, and bandgap alignment of CN-based heterojunctions are discussed elaborately. The correlations between CN-based heterostructures and photocatalytic activities are described excessively. Besides, the prospects of CN-based heterostructures for energy production, storage, and pollutants degradation are discussed.

Bismuth-Graphene Nanohybrids: Synthesis, Reaction Mechanisms, and Photocatalytic Applications—A Review

Photocatalysis is a classical solution to energy conversion and environmental pollution control problems. In photocatalysis, the development and exploration of new visible light catalysts and their synthesis and modification strategies are crucial. It is also essential to understand the mechanism of these reactions in the various reaction media. Recently, bismuth and graphene’s unique geometrical and electronic properties have attracted considerable attention in photocatalysis. This review summarizes bismuth-graphene nanohybrids’ synthetic processes with various design considerations, fundamental mechanisms of action, heterogeneous photocatalysis, benefits, and challenges. Some key applications in energy conversion and environmental pollution control are discussed, such as CO2 reduction, water splitting, pollutant degradation, disinfection, and organic transformations. The detailed perspective of bismuth-graphene nanohybrids’ applications in various research fields presented herein should be of equal interest to academic and industrial scientists.

Structural Characteristics and Environmental Applications of Covalent Organic Frameworks

Covalent organic frameworks (COFs) are emerging crystalline polymeric materials with highly ordered intrinsic and uniform pores. Their synthesis involves reticular chemistry, which offers the freedom of choosing building precursors from a large bank with distinct geometries and functionalities. The pore sizes of COFs, as well as their geometry and functionalities, can be pre-designed, giving them an immense opportunity in various fields. In this mini-review, we will focus on the use of COFs in the removal of environmentally hazardous metal ions and chemicals through adsorption and separation. The review will introduce basic aspects of COFs and their advantages over other purification materials. Various fabrication strategies of COFs will be introduced in relation to the separation field. Finally, the challenges of COFs and their future perspectives in this field will be briefly outlined.

Preparation of a ZnIn2S4–ZnAlOx nanocomposite for photoreduction of CO2 to CO

The ZnIn₂S₄–ZnAlO_x nanocomposite inhibits the recombination of charge carriers and therefore significantly boosts CO₂ photoreduction efficiency.