Contact line relaxation of sessile drops on PDMS surfaces: A methodological perspective

Analysis of Carbon Nanoparticle Coatings via Wettability

Wettability, typically estimated through the contact angle, is a fundamental property of surfaces with wide-ranging implications in both daily life and industrial processes. Recent scientific interest has been paid to the surfaces exhibiting extreme wettability: superhydrophobic and superhydrophilic surfaces, characterized by high water repellency and exceptional water wetting, respectively. Both chemical composition and morphology play a role in the determination of the wettability "performance" of a surface. To tune surface-wetting properties, we considered coatings of carbon nanoparticles (CNPs) in this study. They are a new class of nanomaterials synthesized in flames whose chemistry, dimension, and shape depend on combustion conditions. For the first time, we systematically studied the wettability of CNP coatings produced in a controlled rich ethylene/air flame stabilized over a McKenna burner. A selected substrate was intermittently inserted in the flame at 15 mm above the burner to form a thin coating thanks to a thermophoretic-driven deposition mechanism. The chemical-physical quality and the deposed quantity of the CNPs were varied by opportunely combing the substrate flame insertion number (from 1 to 256) and the carbon-to-oxygen ratio, C/O (from 0.67 to 0.87). The wettability of the coatings was evaluated by measuring the contact angle, CA, with the sessile drop method. When the C/O = 0.67, the CNPs were nearly spherical, smaller than 8 nm, and always generated hydrophilic coatings (CA < 35°). At higher C/O ratios, the CNPs reached dimensions of 100 nm, and fractal shape aggregates were formed. In this case, either hydrophilic (CA < 76°) or superhydrophobic (CA ~166°) behavior was observed, depending on the number of carbon nanoparticles deposed, i.e., film thickness. It is known that wettability is susceptible to liquid surface tension, and therefore, tests were conducted with different fluids to establish a correlation between the flame conditions and the nanostructure of the film. This method offers a fast and simple approach to determining mesoscale information for coating roughness and topographical homogeneity/inhomogeneity of their surfaces.

Mechanical Durability of Low Ice Adhesion Polydimethylsiloxane Surfaces

Elastomeric surfaces and oil-infused elastic surfaces reveal low ice adhesion, in part because of their deformability. However, these soft surfaces might jeopardize their mechanical durability. In this work, we analyzed the mechanical durability of elastic polydimethylsiloxane (PDMS) surfaces with different balances between elasticity and deicing performances. The durability was studied in terms of shear/tensile ice adhesion strength before and after different wear tests. These tests consisted of abrasion/erosion cycles using standard procedures aimed to reproduce different environmental wearing agents. The main objective is to evaluate if our PDMS surfaces can become long-lasting solutions for ice removal in real conditions. We found that our elastic surfaces show excellent durability. After the wear tests, the ice adhesion strength values remained low or even unaltered. Although the oil-infused PDMS surface was the softest one, it presented considerable durability and excellent low ice adhesion, being a promising solution.

Reduced Pressure Drop in Viscoelastic Polydimethylsiloxane Wall Channels

Polydimethylsiloxane (PDMS) is an important viscoelastic material that finds applications in a large number of engineering systems, particularly lab-on-chip microfluidic devices built with a flexible substrate. Channels made of PDMS, used for transporting analytes, are integral to these applications. The PDMS viscoelastic nature can induce additional hydrodynamic contributions at the soft wall/fluid interface compared to rigid walls. In this research, we investigated the pressure drop within PDMS channels bounded by rigid tubes (cellulose tubes). The bulging effect of the PDMS was limited by the rigid tubes under flowing fluids. The PDMS viscoelasticity was modulated by changing the ratio of the base to the cross-linker from 10:1 to 35:1. We observed that the pressure drop of the flowing fluids within the channel decreased with the increased loss tangent of the PDMS in the examined laminar regime [Reynolds number (Re) ∼ 23-58.6 for water and Re ∼ 0.69-8.69 for glycerol solution]. The elastic PDMS 10:1 wall channels followed the classical Hagen Poiseuille's equation, but the PDMS walls with lower cross-linker concentrations and thicker walls decreased pressure drops. The friction factor (f) for the PDMS channels with the two working fluids could be approximated as f = 47/Re. We provide a correlation between the pressure drop and PDMS viscoelasticity based on experimental findings. In the correlation, the loss tangent predominates; the larger the loss tangent, the smaller is the pressure drop. The research findings appear to be unexpected if only considering the energy dissipation of viscoelastic PDMS walls. We attributed the reduction in the pressure drop to a lubricating effect of the viscoelastic PDMS walls in the presence of the working fluids. Our results reveal the importance of the subtle diffusion of the residual oligomers and water from the bulk to the soft wall/fluid interface for the observed pressure drop in soft wall channels.