Metal selectivity and effects of co-existing ions on the removal of Cd, Cu, Ni, and Cr by ZIF-8-EGCG nanoparticles

Efficient adsorption of Cu2+ and Cd2+ from groundwater by MgO-modified sludge biochar in single and binary systems

In this study, MgO-modified sludge biochar (1MBC) prepared from sewage sludge was successfully used as an efficient adsorbent to remove heavy metals from groundwater. The adsorption performance and mechanism of 1MBC on Cu2+ and Cd2+ were investigated in single and binary systems, and the contribution of different mechanisms was quantified. Adsorption kinetics and isotherms analysis revealed that the adsorption processes of Cu2+ and Cd2+ by 1MBC followed the pseudo-second-order kinetic and Langmuir isotherm model in both systems, indicating that Cu2+ and Cd2+ were mainly controlled by chemisorption, and their theoretical maximum adsorption capacities were 240.36 and 219.06 mg·g-1, respectively. The results of the binary system showed that due to the competitive adsorption, the adsorption capacity of 1MBC for both heavy metals was lower than that of the single system, and the selective adsorption of Cu2+ was higher. The influencing variable experiments revealed that the adsorption of Cu2+ and Cd2+ by 1MBC had a wide pH adaption range and strong anti-interference ability to coexisting organics and ions. The adsorption mechanisms involved ion exchange (Cu: 47.39%, Cd: 53.17%), mineral precipitation (Cu: 35.31%, Cd: 24.18%), functional group complexation (Cu: 10.44%, Cd: 14.53%), and other possible mechanisms (Cu: 6.87%, Cd: 8.12%). Furthermore, 1MBC demonstrated excellent regeneration potential after five cycle times. Overall, the results have significant reference value for the practical application of removing heavy metals.

Novel ZIF-8/CNC Nanohybrid with an Interconnected Structure: Toward a Sustainable Adsorbent for Efficient Removal of Cd(II) Ions

Water pollution, especially by heavy metals, continues to pose significant challenges, emphasizing the urgency to develop sustainable processes to remove pollutants while developing sustainable materials derived from renewable sources. In the present research, a nanoscale adsorbent was prepared to remove cadmium (Cd(II)) ions from wastewater by hybridizing zeolitic imidazolate framework-8 (ZIF-8) with a cellulose nanocrystal (CNC). The prepared nanohybrid exhibited an interconnected structure in which the ZIF-8 particles were connected to each other via CNC nanoneedles. The hybridization of ZIF-8 with CNC caused a significant enhancement in the adsorption performance of the fabricated nanohybrid compared to pure ZIF-8, increasing its adsorption capacity by nearly 36%. The adsorption of ZIF/CNC followed the Langmuir isotherm model and pseudo-second-order kinetics models, remarking homogeneous adsorption onto the surface of ZIF/CNC, where chemisorption controlled the rate of adsorption. The thermodynamic study uncovered that the adsorption is spontaneous, endothermic, and entropy-governed as the randomness was increased at the solid-liquid interface. Additionally, the influence of operating variables, such as temperature, adsorbent dosage, pH, and ionic strength, was studied to mimic the adsorption capabilities of the adsorbent in real conditions. Accordingly, the optimum conditions were found to be at 45 °C and pH = 7 with a dosage of 0.4 g/L for the adsorbent. Moreover, the adsorption in a multimetal solution showed that the ZIF/CNC nanohybrid can remove various heavy metals, including Cd(II), Fe(III), Cu(II), and Pb(II) ions simultaneously. Finally, the regeneration study confirmed the great potential of the ZIF/CNC nanohybrid, which retained 94% of its initial adsorption capacity after 5 consecutive adsorption/desorption cycles.

Novel efficient capture of hexavalent chromium by polyethyleneimine/amyloid fibrils/polyvinyl alcohol aerogel beads: Functional design, applicability, and mechanisms

The harmful effects of hexavalent chromium (Cr(VI)) on the environment and human health have aroused wide public concern. In this study, bulk spherical aerogel beads (PAP) were synthesized from polyethyleneimine (PEI), protein amyloid fibrils (AFL), and polyvinyl alcohol (PVA) through green technology and its removal of Cr(VI) from wastewater was comprehensively studied. The results showed that although the bulk PAP beads (∼ 5 mm) only had an average pore size of 16.88 nm and a BET surface area of 12 m²/g, its maximum adsorption capacity for Cr(VI) reached 121.44 mg/g (at 298 K). Cr(VI) adsorption onto PAP conformed to pseudo-second-order adsorption kinetics and was endothermic. The adsorption of Cr(VI) decreased stepwise with the increase of solution alkalinity (pH = 2: 91.97%; pH = 10: 0.04%). Importantly, PAP showed high selectivity towards Cr(VI) in mixed heavy metal solutions (Cr(VI) > Pb(II) > Ni(II) > Cu(II) > Cd(II)) and good reusability (removal efficiency > 88% after 5 cycles). PAP had excellent anti-interference ability against FA and HCO₃^- with the overall removal rate exceeding 87% in the presence of 5 - 25 mg/L of these ions. Cations such as Na⁺, Mg²⁺, and other heavy metal ions at high concentrations could promote the removal efficiency of Cr(VI). The removal rates of Cr(VI) and Cr(III) by PAP in a tannery wastewater were 34.4% and 59.3%, respectively. Meanwhile, the removal rates of Cr(VI) in a electroplating wastewater and a contaminated soil leachate reached 84.4∼89.7%, showing high practicability. Mechanism studies revealed that electrostatic attraction, hydrogen bonding, reduction, and complexation were the main reactions for Cr(VI) removal by PAP. In general, the study of PAP provides a new insight into using bulk monolith materials for treating Cr(VI) contaminated wastewater.

Logic-Based Diagnostic and Therapeutic Nanoplatform with Infection and Inflammation Monitoring and Microenvironmental Regulation Accelerating Wound Repair

Infectious cutaneous wounds are a thorny clinical problem. The microenvironment of the infectious wound is complicated and changes at different healing stages. Traditional treatments either have a single effect such as anti-inflammation, antibacteria, or angiogenesis or a simple mixture of several functions. They fail to deal with the change of the physiological healing process, leading to unsatisfactory outcomes. Herein, we have designed a logic-based smart nanoplatform (named as ZEM), aiming to self-monitor the wound microenvironment and accordingly react to the changes of the healing process, fitting multiple needs of physiological repair at different stages. ZEM was synthesized using zeolitic imidazolate framework-8 (ZIF-8) coated with an epigallocatechin gallate (EGCG)/Mg²⁺ complex. We characterized ZEM in the aspects of morphology, physical and chemical properties, and ion release pattern. At the initial stage, ZEM sensed the weakly acidic environment and responsively released a large number of zinc ions to eliminate bacterial infection. Then came the second inflammation stage, where ZEM responded to the oxidative stress of the local wound area with EGCG absorbing excessive reactive oxygen species (ROS), contributing to the downregulation of intracellular ROS. Meanwhile, local inflammation was alleviated by reducing the expression of proinflammatory M1 phenotype factors (IL-6, TNF-α, and IL-1β). Since the balance of local ROS had been achieved, the resulting disintegration of the EGCG/Mg²⁺ complex gave rise to the sustainable release of Mg²⁺ at the proliferation stage, promoting vascularized healing. In vivo animal experiments further proved the diagnostic and therapeutic functions of ZEM. All these results demonstrated that ZEM was a promising treatment strategy in soft tissue engineering.

Selective adsorption of heavy metals from water by a hyper-branched magnetic composite material: Characterization, performance, and mechanism

The development of adsorbents to remove heavy metal ions from water with recyclable, high adsorption capacity, strong selectivity, safe, and economic performances has always been the focus and challenge of current research. A hyper-branched magnetic composite material (Fe₃O₄@SiO₂-S₄) was fabricated by a method combining "grafting,", "branching," and "modification,", and the structure was characterized by FTIR, XRD, SEM, TEM, SAED, VSM, TGA, and BET. In addition, the adsorption performance and mechanism for heavy metal ions in water were studied. The as-prepared composite material had excellent selective absorbability for Hg²⁺, Cd²⁺, and Ag⁺ in the presence of Fe³⁺, Fe²⁺, Cu²⁺, Mn²⁺, CO²⁺, Zn²⁺, and Ni²⁺, and when pH = 6, T = 30 °C, t = 4 h, it reached a saturated adsorption capacity of 2.42, 2.18, and 1.94 mmol/g to Hg²⁺, Cd²⁺, and Ag⁺, respectively. The adsorption isotherm was consistent with the Langmuir isotherm adsorption model, and the Dubinin Redushcke (D-R) model identified that the adsorption was chemical adsorption in nature. The adsorption kinetic followed the pseudo-second-order model and Boyd film diffusion models. The adsorption capacity of as-prepared material remained about 83% after five elutions. The adsorption mechanism and selective adsorption were revealed by FTIR, EDS, XPS, and DFT calculation. N atoms and O atoms of the active functional groups complexed with metal ions to form stable 2 heptachate chelates and 1 tridentate chelate to achieve the effect of adsorption; furthermore, the adsorption was mainly governed by N atoms of Schiff base groups. This work not only explored an innovative method for the construction of adsorbing materials but also provided a promising adsorbent to selectively remove heavy metal ions in water with potential application.

Preparation of the Carbonized Zif−8@PAN Nanofiber Membrane for Cadmium Ion Adsorption

The zeolitic imidazolate framework (ZIF−8)@polyacrylonitrile (PAN) nanofiber membrane was prepared and carbonized for heavy metal cadmium ion (Cd²⁺) adsorption in aqueous medium. Zinc oxide (ZnO) was first sputtered onto the surface of the PAN electrospun nanofiber membrane to provide a metal ion source. Then, the ZIF−8@PAN nanofiber membrane was prepared via in situ solvothermal reaction and carbonized in a tube furnace at 900 °C under a N₂ atmosphere to enhance adsorption performance. The synthesized ZIF−8 particles with polyhedral structure were uniformly immobilized on the surface of the PAN electrospun nanofiber membrane. After being heated at 900 °C, the polygonal ZIF−8 shrank, and the carbonized ZIF−8@PAN nanofiber membrane was obtained. Compared with the nanofiber membrane without being carbonized, the adsorption capacity of the carbonized ZIF−8@PAN nanofiber membrane reached 102 mg L⁻¹, and its Cd²⁺ adsorption efficiency could be more than 90% under the adsorption temperature of 35 °C and solution of pH = 7.5 conditions. According to the adsorption thermodynamics analysis, the Cd²⁺ adsorption process of the carbonized ZIF−8@PAN nanofiber membrane was spontaneous. The whole Cd²⁺ adsorption process was more suitably described by the pseudo second-order adsorption kinetics model, indicating that there exists a chemical adsorption mechanism besides physical adsorption.

Novel 3D cross-shaped Zn/Co bimetallic zeolite imidazolate frameworks for simultaneous removal Cr(VI) and Congo Red

The photocatalytic properties of Zn/Co zeolite imidazolate frameworks (ZIF-ZnCo) prepared by various Zn/Co ratio are of significantly diversity due to the morphology structure of the ZIF-ZnCo. Thereinto, the prepared ZIF-ZnCO-8:1 is excellent capability by virtue of its 3D cross-shaped structure. Spectral test results show that as-prepared novel 3D cross-shaped ZIF-ZnCo has a lower recombination rate of electron and hole pairs than the lamellar and dodecahedral, thus improving the photocatalytic ability. The photocatalytic ability of 3D cross-shaped ZIF-ZnCo was carefully investigated for removing mixed solution of Congo Red (CR) and Cr(VI). The photocatalytic reduction ability of 3D cross-shaped ZIF-ZnCo was 22% higher than ZIF-8 for Cr(VI). Meanwhile, CR was altogether removed at dark processing and Cr(VI) was removed 70% after dark processing 120 min and photocatalytic 240 min. Therefore, the high adsorption and photocatalytic capacity denote the potential application of 3D cross-shaped ZIF-ZnCo.

Mechanistic insight into the removal of aqueous Cd using an immobilized ZIF-8 and microflora cooperative composite

Biotechnology and metal-organic-frameworks (MOFs) materials have been investigated intensively for the removal of heavy metal from wastewater. However, the cooperative effect of bacteria and MOFs on heavy metal adsorption was less reported. Considering this, this study has screened out microflora with cadmium (Cd) adsorption ability. Furthermore, it was combined with zeolitic imidazolate framework-8 (ZIF-8) to form a ZIF-8 and microflora complex (ZMC). Moreover, ZMC was further immobilized to improve its Cd adsorption effect and reusability. Results revealed that the immobilized ZMC exhibited 99.91% and 78.83% Cd adsorption rate for 20 mg L^-1 and 300 mg L^-1 Cd, respectively. Meanwhile, the immobilized ZMC maintained a relatively stable adsorption effect under varied external pH. The reaction mechanism was summarized as covalent binding accompanied with a small amount of electrostatic attraction. Microflora could enhance the surface electronegativity of ZIF-8. ZIF-8 could strengthen the response of antioxidant activity of microflora and augmented the affinity of microflora secretions for Cd. This proposed method may provide a new insight for the removal of heavy metal contaminants in water.

Effective removal of Cd(Ⅱ) by sludge biochar supported nanoscale zero-valent iron from aqueous solution: Characterization, adsorption properties and mechanism

Nanoscale zero-valent iron (nZVI) has a high chemical reactivity for heavy metals, but nZVI forms aggregate easily. In this study, a synthesis of sludge biochar supported nanoscale zero-valent iron (nZVI@SBC) by...

Isotherm, kinetics, and adsorption mechanism studies of diethylenetriaminepentaacetic acid-modified banana/pomegranate peels as efficient adsorbents for removing Cd(II) and Ni(II) from aqueous solution

Two novel absorbents were synthesized for the first time by banana and pomegranate peels using diethylenetriaminepentaacetic acid (DTPA) modification to eliminate Cd(II) and Ni(II) of sewage. The DTPA-modified peels performed significantly higher adsorption capacity than unmodified materials. The maximum adsorption capacities of DTPA-modified banana/pomegranate peel were 46.729/46.296 mg/g for Cd(II), and 29.240/16.611 mg/g for Ni(II). Adsorption isotherm and kinetics models were simulated to determine their removal efficiency and potential for recovery of these two heavy metals. As the results, the adsorption reached equilibrium within 5 min and was well described by the pseudo-second order model and Langmuir isotherm. The surface morphology analysis of the synthetic materials by Scanning Electron Microscopy-Energy Dispersive X-ray spectroscopy, Fourier Transform Infrared spectroscopy, and X-ray Photoelectron Spectroscopy, implied that ion exchange, complexation, and physical adsorption may together contribute to Cd(II) and Ni(II) loading on DTPA-modified peels. This study demonstrates the feasibility of waste peels as cost-efficient bio-absorbents to remove Cd(II) and Ni(II) in sewage systems, and discovers potential adsorption mechanism of efficiency improvements after DTPA modification.

Microscopic mechanism about the selective adsorption of Cr(VI) from salt solution on nitrogen-doped carbon aerogel microsphere pyrolysis products

A series of nitrogen-doped carbon aerogels (NCAs) were obtained through phase reaction polymerization and different carbonization temperatures to enhance adsorption efficacy of hexavalent chromium (Cr[VI]) from wastewater significantly. Factors that influence adsorption properties of carbon aerogel microspheres toward Cr(VI), such as pH, adsorbent content, initial Cr(VI) concentrations, and coexisting anion, were investigated. Three isotherm (Langmuir, Freundlich, and Sips) and three kinetic (pseudofirst-order, pseudosecond-order, and Elovich) models were used to interpret the adsorption process. The adsorption capacity of Cr(VI) reached 180.62 mg·g^-1, which was superior to that of most aerogel adsorbents. In addition to the adsorption effect, the XPS results also showed that N-containing groups on the NCA surface reduce the adsorbed Cr(VI) to the less toxic Cr(III). The prepared sorbent demonstrates a negligible loss in adsorption capacity after 6 cycles. NCAs show acceptable application prospects in selective removal of Cr(VI) ions.

Silver Nanoparticles Functionalized with Sodium Mercaptoethane Sulfonate to Remove Copper from Water by the Formation of a Micellar Phase

This work presents a novel procedure for the removal of Cu2+ from water, an essential element in human nutrition considered toxic in high concentrations, based on a microextraction technique involving the formation of a micellar phase. To achieve the total elimination of copper from aqueous samples, a Cu2+-complexing reagent based on silver nanoparticles functionalized with sodium mercaptoethane sulfonate (AgNPs@MESNa) was used. The complex formed by Cu2+ and the reagent was extracted into a micellar microphase formed by Triton X-114, a harmless surfactant. Volumes of 200 µL of the 10−4 mol L−1 suspension of AgNPs@MESNa and 100 µL of a solution of Triton X-114 at 30% m/m were employed to successfully remove 10 mg L−1 of Cu from 20 mL of water samples. The time and temperature needed to achieve 100% microextraction efficiency were 10 min and 40 °C, respectively. The procedure is considered environmentally friendly due to the low volume of the extracting phase and the simple experimental conditions that achieve total removal of Cu2+ from water samples.