Enhanced electrocatalytic activity of PtRu/nitrogen and sulphur co-doped crumbled graphene in acid and alkaline media

Ultrafine Pt-based catalyst decorated with oxygenophilic Ni-sites accelerating alkaline H2O dissociation for efficient hydrogen evolution

Although Pt is a widely adopted commercial catalyst for the hydrogen evolution reaction (HER), its practical application is greatly limited by its prohibitive cost and high energy barrier for H2O dissociation in alkaline media. Herein, an ultrafine Pt-based catalyst decorated with oxygenophilic Ni-sites is rationally designed and successfully synthesized with Pt5(GS)10 (HGS = l-reduced glutathione) nanocluster precursor. The optimized Ni-decorated Pt catalyst (Ni-Pt-C-500) with ultrafine nanoparticles (about 1.6 nm) exhibits a low overpotential (14.0 mV) at 10 mA cm-2 and a mild Tafel slope of 20.8 mV dec-1 in the HER, which is superior to its undecorated counterpart (Pt-C-500), the commercial 20 wt% Pt/C catalyst and most of the previously reported Pt-based electrocatalysts. Experimental observations and theoretical calculations indicate that H2O could be spontaneously adsorbed to Ni-sites of the Ni-Pt-C-500 catalyst. Mechanistic studies reveal that Ni-sites promote HER by accelerating the kinetic of H2O cleavage and optimizing the electronic structure of Pt. This work paves a new avenue for designing other ultrafine hybrid electrocatalysts based on metal nanoclusters to enhance catalytic reaction kinetics.

A facile approach for sulphur and nitrogen co-doped carbon nanodots to improve photothermal eradication of drug-resistant bacteria

In this study, we produced S, N co-doped CNDs (SN@CNDs) by using dimethyl sulfoxide (DMSO) and formamide (FA) as single sources of S and N, respectively. We varied the S/N ratios by adjusting the volume ratios of DMSO and FA and investigated their effect on the red-shift of the CNDs' absorption peak. Our findings demonstrate that SN@CNDs synthesized using a volume ratio of 5:6 between DMSO and FA exhibit the most significant absorption peak redshift and enhanced near-infrared absorption performance. Based on comparative analysis of the particle size, surface charge, and fluorescence spectrum of the S@CNDs, N@CNDs, and SN@CNDs, we propose a possible mechanism to explain the change of optical properties of CNDs due to S, N doping. Co-doping creates a more uniform and smaller band gap, resulting in a shift of the Fermi level and a change in energy dissipation from radioactive to non-radiative decay. Importantly, the as-prepared SN@CNDs exhibited a photothermal conversion efficiency of 51.36% at 808 nm and demonstrated exceptional photokilling effects against drug-resistant bacteria in both in vitro and in vivo experiments. Our facile method for synthesizing S and N co-doped CNDs can be extended to the preparation of other S and N co-doped nanomaterials, potentially improving their performance.

Research Progress on Graphite-Derived Materials for Electrocatalysis in Energy Conversion and Storage

High-performance electrocatalysts are critical to support emerging electrochemical energy storage and conversion technologies. Graphite-derived materials, including fullerenes, carbon nanotubes, and graphene, have been recognized as promising electrocatalysts and electrocatalyst supports for the oxygen reduction reaction (ORR), oxygen evolution reaction (OER), hydrogen evolution reaction (HER), and carbon dioxide reduction reaction (CO₂RR). Effective modification/functionalization of graphite-derived materials can promote higher electrocatalytic activity, stability, and durability. In this review, the mechanisms and evaluation parameters for the above-outlined electrochemical reactions are introduced first. Then, we emphasize the preparation methods for graphite-derived materials and modification strategies. We further highlight the importance of the structural changes of modified graphite-derived materials on electrocatalytic activity and stability. Finally, future directions and perspectives towards new and better graphite-derived materials are presented.

Ordered mesoporous Pt-Ru-Ir nanostructures as superior bifunctional electrocatalyst for oxygen reduction/oxygen evolution reactions

An efficient oxygen bifunctional catalyst Pt-Ru-Ir with ordered mesoporous nanostructures (OMNs) was successfully synthesized by chemical reduction using KIT-6 mesoporous silica as a template. The crystallographic behavior, electronic effects, and microstructure of the catalysts were investigated by XRD, XPS, SEM, and TEM analysis. The influence of OMNs and the effect of Ir content in Pt-Ru-Ir catalyst on both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) were investigated. The synergistic and electronic effects play an important role in electrocatalytic performance through the electronic coupling between Pt, Ru and Ir followed by the alloy formation with different lattice strain percentages. Amongst, the OMNs Pt₇₀Ru₂₅Ir₅ catalyst exhibits the highest mass activity of 0.21 mA µg^-1 and specific activity of 0.33 mA cm^-2 for ORR, which are nearly 5-fold greater than those for benchmark Pt/C catalyst. Furthermore, the Pt₇₀Ru₂₅Ir₅ demonstrated enhanced OER activity with an overpotential of 470 mV at 10 mA cm^-2, an onset potential of 1.70 V, and a Tafel slope of 118 mV dec^-1, outperforming commercial IrO_2. In addition, the durability of the Pt₇₀Ru₂₅Ir₅ catalyst for ORR and OER are found to be extended in comparison with that of other catalysts reported in this work after 6000 cycles. These results demonstrate that the ordered OMNs Pt-Ru-Ir with low Ir content (∼5 wt%) could be a promising oxygen bifunctional catalyst for electrochemical energy conversion and storage applications.

Electronic and lattice strain dual tailoring for boosting Pd electrocatalysis in oxygen reduction reaction

Deliberately optimizing the d-band position of an active component via electronic and lattice strain tuning is an effective way to boost its catalytic performance. We herein demonstrate this concept by constructing core-shell Au@NiPd nanoparticles with NiPd alloy shells of only three atomic layers through combining an Au catalysis with the galvanic replacement reaction. The Au core with larger electronegativity modulates the Pd electronic configuration, while the Ni atoms alloyed in the ultrathin shells neutralize the lattice stretching in Pd shells exerted by Au cores, equipping the active Pd metal with a favorable d-band position for electrochemical oxygen reduction reaction in an alkaline medium, for which core-shell Au@NiPd nanoparticles with a Ni/Pd atomic ratio of 3/7 exhibit a half-wave potential of 0.92 V, specific activity of 3.7 mA cm^-2, and mass activity of 0.65 A mg^-1 at 0.9 V, much better than most of the recently reported Pd-even Pt-based electrocatalysts.

Photo-enhanced electrocatalytic hydrogen evolution reaction coupled semiconductor with plasma in neutral solution

A gold-ruthenium/zinc oxide nanorod composite was synthesized. The electrochemical catalytic efficiency of the noble metal-semiconductor nanostructure increased by nearly 30% under the irradiation of an external light source. It provides an efficient way of thinking for the design of electrocatalysts with a photoresponse.