Bi2O3/BiVO4@graphene oxide van der Waals heterostructures with enhanced photocatalytic activity toward oxygen generation

Unlocking a Type-II CoO@BiVO4 Heterostructure for Wastewater Purification

Developing a semiconductor-based heterostructure photoanode is crucial in improving the photoelectrocatalytic (PEC) efficiency for degrading refractory organic pollutants. Nevertheless, the PEC performance of the photoanodes is usually restricted by electron/hole pair recombination, oxygen evolution, and slow electron transfer. Herein, a novel CoO@BiVO4 nanowire array film (Ti/CoO@BiVO4) with n-type semiconductor characteristics was prepared via a straightforward hydrothermal method. The optimized Ti/CoO@BiVO4 electrode exhibited excellent PEC decolorization efficiency of active brilliant blue KN-R (∼92.8%) and long-term stability, outperforming recent reports. The insight reason for enhancing the PEC degradation efficiency of the Ti/CoO@BiVO4 electrodes can be attributed to the large electrochemical active area, low charge transfer resistance, and negative flat band potential. The formation of a type-II heterostructure was investigated between CoO and BiVO4 further to promote the generation and separation efficiency of electron/hole pairs, indicating that the optimized Ti/CoO@BiVO4 electrode has the potential for the water PEC degradation ability and superior service life.

Enhanced visible-light-driven photocatalytic activity in SiPGaS/arsenene-based van der Waals heterostructures

Van der Waals heterostructures (vdWHs) showcase robust and tunable light-matter interactions, establishing an intriguing realm for investigating atomic-scale photocatalytic properties. Here, we employ ab initio methods to study the photocatalytic and optical properties of semiconducting SiPGaS/arsenene-based vdWHs with a type-II band alignment. Across the heterointerfaces, there exists significant built-in electric fields and large potential drop, in turn facilitating the spatial separation of photo-generated electron-hole pairs. These vdWHs further possess high carrier mobility in the order of 102 cm2V⁻1S⁻1, which combining with appropriate band edge positions, endow the vdWHs an absorption coefficient of ∼10⁵ cm⁻1 to harvest a maximal portion of the solar spectrum for visible-light-driven photocatalytic applications. Our findings also reveal transition of the type-II band alignment in a type-III configuration via compressive strain for tunneling field-effect transistor application. Furthermore, both types of vdWHs exhibit enhanced suitability for photocatalysis under conditions with a pH of 2.

Thermocatalytic Decomposition of Methane: A Review on Carbon-Based Catalysts

The global initiatives on sustainable and green energy resources as well as large methane reserves have encouraged more research to convert methane to hydrogen. Catalytic decomposition of methane (CDM) is one optimistic route to generate clean hydrogen and value-added carbon without the emission of harmful greenhouse gases, typically known as blue hydrogen. This Review begins with an attempt to understand fundamentals of a CDM process in terms of thermodynamics and the prerequisite characteristics of the catalyst materials. In-depth understanding of rate-determining steps of the heterogeneous catalytic reaction taking place over the catalyst surfaces is crucial for the development of novel catalysts and process conditions for a successful CDM process. The design of state-of-the-art catalysts through both computational and experimental optimizations is the need of hour, as it largely governs the economy of the process. Recent mono- and bimetallic supported and unsupported materials used in CDM process have been highlighted and classified based on their performances under specific reaction conditions, with an understanding of their advantages and limitations. Metal oxides and zeolites have shown interesting performance as support materials for Fe- and Ni-based catalysts, especially in the presence of promoters, by developing strong metal-support interactions or by enhancing the carbon diffusion rates. Carbonaceous catalysts exhibit lower conversions without metal active species and largely result in the formation of amorphous carbon. However, the stability of carbon catalysts is better than that of metal oxides at higher temperatures, and the overall performance depends on the operating conditions, catalyst properties, and reactor configurations. Although efforts to summarize the state-of-art have been reported in literature, they lack systematic analysis on the development of stable and commercially appealing CDM technology. In this work, carbon catalysts are seen as promising futuristic pathways for sustained H2 production and high yields of value-added carbon nanomaterials. The influence of the carbon source, particle size, surface area, and active sites on the activity of carbon materials as catalysts and support templates has been demonstrated. Additionally, the catalyst deactivation process has been discussed, and different regeneration techniques have been evaluated. Recent studies on theoretical models towards better performance have been summarized, and future prospects for novel CDM catalyst development have been recommended.

A novel magnetic AgVO3/rGO/CuFe2O4 hybrid catalyst for efficient hydrogen evolution and photocatalytic degradation

A superior semiconductor material with efficient charge separation and easy reuse could be a promising route for efficient photocatalytic hydrogen evolution and pollutant degradation. AgVO₃ is one of the best visible light active materials which has attracted much attention for several biological and environmental applications. In the aim of enhancing its stability and recyclability a novel AgVO₃/rGO/CuFe₂O₄ heterojunction was prepared by hydrothermal method for hydrogen generation (H₂) and 4-nitrophenol (4-NP) degradation as well. The composite was well characterized by XRD, SEM, HR-TEM, XPS and VSM. The morphological images suggested the rod shaped AgVO₃ and irregular shaped CuFe₂O₄ are unevenly distributed on reduced graphene oxide (rGO) layers. The hydrogen evolution results indicated that the composite showed around 8.937 mmol g^-1h^-1 of H₂ generation which was ∼2.3 times and ∼9.2 times higher than pure AgVO₃ (3.895 mmol g^-1h^-1) and CuFe₂O₄ (0.96 mmol g^-1h^-1) respectively. The 4-NP degradation efficiency of the prepared composite was observed as 94.7% (k = 0.01841 min^-1) which is much higher than the AgVO₃ (66.3%) and CuFe₂O₄ (38.2%) after 4 h of irradiation. The higher efficiency could be attributed to the heterojunction formation and faster charge separation. The radical trapping results indicated that the •OH, O₂•- and photogenerated h⁺ are the main species responsible for efficient activity. The AgVO₃/rGO/CuFe₂O₄ heterojunction showed 49.6 emu/g of saturation magnetization and confirms that it could be easily separated with an external magnet, and showed 85.3% of degradation efficiency even after 6 recycles which indicated its higher stability and recyclability. Thus, our study provides new insight into hydrogen generation and phenol degradation using AgVO₃ based recyclable composites.

Facile fabrication of AgVO3/rGO/BiVO4 hetero junction for efficient degradation and detoxification of norfloxacin

In the recent past, the development of efficient materials for degradation and detoxification of antibiotics has gained more attention in wastewater treatment process. As a visible light active material AgVO₃ has attracted much concern in environmental remediation. To improve its efficiency and stability, a novel heterojunction was prepared by combining AgVO₃ with rGO and BiVO₄ through a hydrothermal method. The prepared AgVO₃/rGO/BiVO₄ composite was further utilized for effective detoxification of Norfloxacin (NFC) antibiotic. The morphological analysis revealed the clear rod shaped AgVO₃ and leaf like BiVO₄ that are evenly distributed on reduced graphene oxide (rGO) layers. The visible light absorbance and the catalytic activity of AgVO₃/rGO/BiVO₄ was dramatically improved compared to pure AgVO₃ and BiVO₄. From the results it showed that the degradation efficiency of AgVO₃/rGO/BiVO₄ (∼96.1%, k = 0.01782 min^-1) was 2.5 times higher than pure AgVO₃ and 3.4 times higher than the pure BiVO₄ respectively towards NFC after 90 min. The higher efficiency could be attributed to the heterojunction formation and faster charge separation. The radical trapping experiments results indicated that the •OH, and O₂•- are the main species responsible for degradation. The degradation products of NFC were analysed through ESI-LC/MS and pathway was proposed. Furthermore, the toxicity assessment of pure NFC and its degradation products was studied using E. coli as the model bacteria through colony forming unit assay and the results indicated the efficient detoxification was attained during the degradation process. Thus, our study provides new insight into detoxification of antibiotics using AgVO₃ based composites.

Enhanced sulfamethazine detoxification by a novel BiOCl (110)/NrGO/BiVO4 heterojunction

The emerging contaminants removal from the environment has recently been raised concerns due to their presence in higher concentrations. Over usage of emerging contaminant such as sulfamethazine poses serious threat to the aquatic and human health as well. This study deals with rationally structured a novel BiOCl (110)/NrGO/BiVO₄ heterojunction which is used to detoxify sulfamethazine (SMZ) antibiotic efficiently. The synthesised composite was well characterized and the morphological analysis evidenced the formation of heterojunction consisted of nanoplates BiOCl with dominant exposed (110) facets and leaf like BiVO₄ on NrGO layers. Further results revealed that the addition of BiVO₄ and NrGO tremendously increased the photocatalytic degradation efficiency of BiOCl with the rate of 96.9% (k = 0.01783 min^-1) towards SMZ within 60 min of visible light irradiation. Furthermore, heterojunction energy-band theory was employed to determine the degradation mechanism of SMX in this study. The larger surface area of BiOCl and NrGO layers are believed to be the reason for higher activity which facilitates the excellent charge transfer and improved light absorption. In addition, SMZ degradation products identification was carried out by LC-ESI/MS/MS to determine the pathway of degradation. The toxicity assessment was studied using E. coli as a model microorganism through colony forming unit assay (CFU), and the results indicated a significant reduction in biotoxicity was observed in 60 min of degradation process. Thus, our work gives new methods in developing various materials that effectively treat emerging contaminants from the aqueous environment.

A strategy-purifying wastewater with waste materials: Zn2+ modified waste red mud as recoverable adsorbents with an enhanced removal capacity of congo red

The strategy, called purifying wastewater with waste materials (PWWM), can simultaneously improve the secondary utilization of industrial waste materials and in turn, reduce environmental pollution. However, the PWWM strategy has still not been extensively used because of its low purification efficiency of organic pollutants and extremely difficult secondary utilization process. Herein, we use zinc aluminum silicate (ZAS) to modify waste granular red mud (GRM) to form a recoverable adsorbent, called ZAS/GRM adsorbent. The ZAS has been found to exhibit exceptional adsorption performance with the ability to firmly anchor onto the surface of GRM, in which heavy metal ions can effectively solidify and reduce their outflow. Furthermore, many voids have been tactfully designed in the ZAS/GRM adsorbents by using a water vapor project, which provide more active sites for congo red (CR) organic dye, thereby remarkably improving the removal efficiency of CR. From our purification of CR, we find that the CR adsorption capacity of the ZAS/GRM adsorbent is 3.509 mg g^-1, which is four times higher than pure GRM (0.820 mg g^-1). This study demonstrates our PWWM strategy is highly effective and can inspire more research on waste reuse.

Boosting photoelectrochemical water splitting of bismuth vanadate photoanode via novel co-catalysts of amorphous manganese oxide with variable valence states

Bismuth vanadate (BVO) is a promising photoanode while suffers from sluggish oxygen evolution kinetics. Herein, an ultra-thin manganese oxide (MnO_x) is selected as co-catalyst to modify the surface of BVO photoanode by a facile spray pyrolysis method. The photoelectrochemical measurements demonstrate that surface charge transport efficiency (η_surface) of MnO_x modified BVO photoanode (BVO/MnO_x) is strikingly increased from 6.7 % to 22.3 % at 1.23 V_RHE (reversible hydrogen electrode (V_RHE)). Moreover, the η_surface can be further boosted to 51.3 % at 1.23 V_RHE after applying Ar plasma on the BVO/MnO_x sample_, which is around 7 times higher comparing with that of pristine BVO samples. Additional characterizations reveal that the remarkable PEC performance of the Ar-plasma treated BVO/MnO_x photoanode (BVO/MnO_x/Ar plasma) could be attributed to the increased charge carrier density, extended carrier lifetime and additional exposed Mn³⁺ active sites on the BVO surface. This investigation could provide a new understanding for the design of BVO photoanode with superior PEC performance based on the modification of MnO_x and plasma surface treatment.

N-doped rutile TiO2 nanorod@g-C3N4 core/shell S-scheme heterojunctions for boosting CO2 photoreduction activity

A novel core/shell structure composed of N-doped rutile TiO2@g-C3N4 (NT@CNx) with an S-scheme heterojunction is successfully synthesized. The S-scheme heterojunction optimizes the electrochemical property and redox ability of the NT@CNx composite.

Novel assembly of BiVO4@N-Biochar nanocomposite for efficient detoxification of triclosan

The wide spread of antibacterial and antifungal agents demands in growing multifunctional materials to completely eliminate these organic contaminants in water. BiVO₄ (Bismuth vanadate) is a superior catalyst under visible light but suffers with high photoelectron-hole pair recombination rate and poor adsorption capacity which limits its efficiency. Addition of N-doped Biochar (N-Biochar) to BiVO₄ with large specific surface area and high conductivity are anticipated to overcome the problem and promote the catalytic performance. Thus, the present study developed a simple hydrothermal method to prepare BiVO₄@N-Biochar catalyst for efficient detoxification of Triclosan (TCS). The morphological analysis results suggested that BiVO₄ particles were evenly distributed on carbon surface amongst the N-Biochar matrix. Within 60 min of visible light irradiation, nearly 94.6% TCS degradation efficiency was attained by BiVO₄@N-Biochar (k = 0.02154 min^-1) while only 56.7% was attained with pure BiVO₄ (k = 0.00637 min^-1). In addition, LC-MS/MS technique was utilized to determine the TCS degradation products generation in the photodegradation process and pathway was proposed. Furthermore, the E. coli (Escherichia coli) colony forming unit assay was used to determine the biotoxicity of the degradation products in which 72.3 ± 2.6% of detoxification efficiency was achieved and suggested a substantial reduction in biotoxicity during the photodegradation.

Fabrication of Co3O4-Bi2O3-Ti catalytic membrane for efficient degradation of organic pollutants in water by peroxymonosulfate activation

In this study, a functionalized Co₃O₄-Bi₂O₃-Ti catalytic membrane (CBO-Ti-M) was prepared and applied for removing organic pollutants via activating peroxymonosulfate (PMS) in the dead-end filtration mode. Characterizations including scanning electron microcopy (SEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) showed that the Co₃O₄-Bi₂O₃ catalyst was successfully supported on the Ti membrane. The CBO-Ti-M /PMS system could efficiently remove various organic pollutants such as sulfamethoxazole, methyl orange, bisphenol A and methylene blue, achieving removal efficiencies of 98.0%-99.5%. The effects of PMS concentration, flow rate and solution environment on degradation efficiency were investigated in detail. Furthermore, quenching experiments, electron spin resonance (ESR) and in-situ open circuit potential (OCP) tests collectively demonstrated that singlet oxygen as well as the non-radical electron transfer pathway mainly contributed in the reaction mechanism. The synergistic effect of Co and Bi was illustrated according to XPS results, and the possible degradation pathway of MB was proposed based on LC-MS analysis. Reusability test showed that pollutant removal efficiency with the CBO-Ti-M /PMS system remained stable in four runs and limited metal leaching was observed.