A thin film of naphthalenediimide-based metal-organic framework with electrochromic properties

Linker Conformation Controls Oxidation Potentials and Electrochromism in Highly Stable Zr-Based Metal-Organic Frameworks

The development of tailor-made electrochromic (EC) materials requires a large variety of available substances with properties that precisely match the task. Since the inception of electrochromic metal-organic frameworks (MOFs), the field relies only on a limited set of building blocks, providing the desired electrochromic effect. Herein, we demonstrate for the first time the implementation of a Piccard-type system (N,N,N',N'-benzidinetetrabenzoate) into Zr-MOFs to obtain electrochromic materials. With fast switching rates, high contrast ratio, long-life stability, and exceptional chemical and physical stability, the novel material is on par with inorganic EC material. The new EC system exhibits an ultrahigh contrast from the bleaching state, with transmittance in the visible region >53%, to the colored state with a transmittance of ca. 3%. The 5 μm thick film attained up to 90% of the coloring in 12.5 s and exhibited high electrochemical reversibility. Moreover, the conformational lability of the electrochromic ligand chosen is locked via the topology design of the framework, which is not attainable in the solution. Locked conformations of the redox active linker in distinct polymorphous frameworks (DUT-65 and DUT-66) feature different redox characteristics and opens the door to the overarching control of the oxidation pathway in the Piccard-type systems.

Amino-Functionalized NDI-Based MOFs as Unusual "Turn On" and "Turn Off" Fluorescent Sensors for Phenolic Pollutants with Double Solvent Channel Response and Iodine Adsorbents

Regulating mixed ligands to change the functional properties of metal-organic frameworks (MOFs) has been an important topic; especially, the structural changes have significant implications for the transformation of sensing response in different solvent channels. Herein, two [Cd (DPNDI) (NH2-BDC)0.5(NO3)]·2.25DMF (1) and [Cd(DPNDI)(NH2-AIPA)]·0.5DMF (2) (DPNDI = N,N-di(4-pyridyl)-1,4,5,8-naphthalenetetracarboxydiimide, NH2-BDC = 2-amino terephthalic acid, NH2-AIPA = 5-aminoisophthalic acid) were synthesized by the solvothermal method. Structural analysis shows that complex 1 has a two-dimensional planar network structure and complex 2 exhibits a three-dimensional network structure, endowing its potential as an efficient fluorescence sensor for phenolic compound detection under different solvent environments. Both complexes showed high fluorescence quenching sensitivity to phenolics in a water medium. Conversely, complex 1 showed a fluorescence enhancement response to phenolic pollutants in an ethanol system with significantly low detection limits and recyclability. The detection limits were 0.58 μM for TNP, 1.3 μM for DNP, and 2.43 μM for PCP. In addition, the uncoordinated amino groups in the complexes promote them to exhibit excellent iodine adsorption performance. Especially, complex 2 can serve as an adsorbent for iodine in cyclohexane solution with better adsorption efficiency than that of complex 1, and its adsorption capacity can reach 505 mg/g. The mixed ligands regulation strategy of NDI-based MOFs will open up an effective avenue for the conversion of fluorescence signals in dual-solvent channels and play simultaneously important roles in multiple applications.

Electrochemically driven physical properties of solid-state materials: action mechanisms and control schemes

The various physical properties recently induced by solid-state electrochemical reactions must be comprehensively understood, and their mechanisms of action should be elucidated. Reversible changes in conductivity, magnetism, and colour have been achieved by combining the redox reactions of d metal ions and organic materials, as well as the molecular and crystal structures of solids. This review describes the electrochemically driven physical properties of conductors, magnetic materials, and electrochromic materials using various electrochemical devices.

Design and Construction of the Uranyl Coordination Polymer with Multifunction Stimulus Response: Fluorescent Sensors for Halide Ions and Photochromism

It can provide ideas for the use of uranium elements in the treatment of spent fuel from nuclear wastewater to explore the application potential of uranium element. Thus, it is necessary to research the structure and properties of a novel uranyl coordination polymer (CP) for uranium recovery and reuse. Herein, we designed and prepared a new uranyl CP U-CMNDI based on UO22+ and H2CMNDI (H2CMNDI = N, N'-bis(carboxymethyl)-1,4,5,8-naphthalenediimide). Structural analysis shows that two uranyl ions are connected by two parallel deprotonated CMNDI ligands to form a discrete uranyl dimer structure. U-CMNDI can act as a potential stimulus-responsive halide ion sensor by a fluorescence "turn on" response in water. The limit of detection for fluoride (F-), bromide (Br-), iodide (I-), and chloride (Cl-) is 5.00, 5.32, 5.49, and 5.73 μM, respectively. The fluorescence "turn on" behavior is based on the photoinduced electron transfer (PET) mechanism between halide ions and electron-deficient NDI cores. In addition, U-CMNDI demonstrates a color response to ultraviolet light, exhibiting reversible photochromic behavior with a notable color change. The color change mechanism can contribute to the PET process and the radical process.

Transparent-to-Brown-Black Patterned Electrochromic Metal-Organic Frameworks

Metal-organic frameworks (MOFs) exhibit promising electrochromic (EC) performance owing to their porous structure, regular channel, and tunable component characteristics. However, few reports focus on MOF materials with the EC performance of a transparent to brown-black (neutral colored state) change that is more suitable for smart windows. In this work, we proposed a strategy for synthesizing MOF (named Ni-BPY) EC materials and corresponding films fabricated via a low-cost electrostatic spray deposition technique. The obtained film exhibits excellent EC performance with a neutral color change from transparent to brown-black, a large optical modulation of 70% at 430 nm, and a fast response within 10 s. Benefiting from good electrical and chemical stability, the Ni-BPY film can be cycled over 500 times. Notably, the Ni-BPY MOF film also delivers a stepwise-controlled process during the bleached state due to its porous characteristics. In addition, the unique color variation of the Ni-BPY film derives from the redox reaction of the Ni metal node between Ni2+ and Ni3+, which is verified by the in situ potential-dependent Raman and X-ray photoelectron spectroscopy (XPS) measurement. As a proof of application, the patterned Ni-BPY EC films and devices are additionally constructed to demonstrate their potential application in electronic tags and logo displays.

Soluble polymer facilely self-grown in situ on conducting substrates at room temperature towards electrochromic applications

Electrochromic polymer film preparation methods such as spin coating, spray coating, and electrochemical polymerization, are commonly used. At present, developing new film preparation technology is an important aspect in the field of electrochromics. Herein, a continuous in situ self-growing method based on the chemical reaction occurring on the surface of an ITO glass between a metal oxide and organic acid groups was successfully applied to prepare electrochromic polymer films at a mild room temperature. SEM, FT-IR spectroscopy, XPS, and XRD characterization methods were combined to reveal the process and mechanism of film formation. The following notable electrochromic properties were observed: switching time within 6 s, contrast reached 35%, and minimal decrease of stability after 600 cycles. Finally, the patterned films were obtained through the directional growth of polymers in solution. This study provides an effective strategy for designing and preparing electrochromic films by self-growing methods in future applications.

High Electrochromic Performance of Perylene Bisimide/ZnO Hybrid Films: An Efficient, Energy-Saving, and Green Route

The composite or hybrid of organic and inorganic materials is one of the common ways to improve the properties of photoelectric functional materials. Perylene bisimide (PBI) derivatives, as large π-conjugated organic small molecules, are a class of photoelectric functional materials with excellent performance. However, there were few reports on PBIs in the electrochromic field due to the difficulty of film-forming caused by their generally poor solubility. Here, water-soluble PBI derivatives (PDI-COOH and PCl-COOH) were synthesized. The hybrid films (ZnO@PDI-COOH/PCl-COOH) formed by the coordination bond and π-π stacking were prepared via a simple solution immersion method. Fourier transform infrared spectrometry and X-ray diffraction as well as scanning electron microscopy, and energy-dispersive spectrometry results further confirmed the formation of hybrid films. At the same time, electrochemical and spectroelectrochemical analyses revealed that the films have reversible redox activity and cathodic electrochromic properties, which can change from orange-red to purple. The ZnO@PDI-COOH hybrid film formed by coordination bonds exhibits fast switching times (1.7 s colored time and 2.6 s bleached time), good stability (retain 92.41% contrast after 2400 cycles), a low driving voltage (-0.6-0 V), and a high coloration efficiency (276.14 cm²/C). The corresponding electrochromic devices also have good electrochromic properties. On this basis, a large-area (100 mm × 100 mm) electrochromic display device with fine patterning was fabricated by using the hybrid film, and the device shows excellent reversible electrochromic performance. This idea of constructing organic-inorganic hybrid materials with coordination bonds provides an effective, energy-saving, and green method, which is expected to promote the large-scale and fine production of electrochromic materials.

Naphthalene Phthalimide Derivatives as Model Compounds for Electrochromic Materials

Electrochromism of organic compounds is a well-known phenomenon; however, nowadays, most research is focused on anodic coloring materials. Development of efficient, cathodic electrochromic materials is challenging due to the worse stability of electron accepting materials compared with electron donating ones. Nevertheless, designing stable cathodic coloring organic materials is highly desired-among other reasons-to increase the coloration performance. Hence, four phthalimide derivatives named 1,5-PhDI, 1,4-PhDI, 2,6-PhDI and 3,3'-PhDI were synthesized and analyzed in depth. In all cases, two imide groups were connected via naphthalene (1,5-PhDI, 1,4-PhDI, 2,6-PhDI) or 3,3'-dimethylnaphtidin (3,3'-PhDI) bridge. To observe the effect of chemical structure on physicochemical properties, various positions of imide bond were considered, namely, 1,5- 1,4- and 2,6-. Additionally, a compound with the pyromellitic diimide unit capped with two 1-naphtalene substituents was obtained. All compounds were studied in terms of their thermal behavior, using differential calorimetry (DSC) and thermogravimetric analysis (TGA). Moreover, electrochemical (CV, DPV) and spectroelectrochemical (UV-Vis and EPR) analyses were performed to evaluate the obtained materials in terms of their application as cathodic electrochromic materials. All obtained materials undergo reversible electrochemical reduction which leads to changes in their optical properties. In the case of imide derivatives, absorption bands related to both reduced and neutral forms are located in the UV region. However, importantly, the introduction of the 3,3'-dimethylnaphtidine bridge leads to a noticeable bathochromic shift of the reduced form absorption band of 3,3'-PhDI. This indicates that optimization of the phthalimide structure allows us to obtain stable, cathodic electrochromic materials.

Versatile Photo/Electricity Responsive Properties of a Coordination Polymer Based on Extended Viologen Ligands

Responsive chromogenic materials have attracted increasing interest among researchers; however, up until now, few materials have exhibited multifunctional chromogenic properties. The coordination polymers (CPs) provide intriguing platforms to design and construct multifunctional materials. Here, a multifunctional photo/electricity responsive CP named Zn−Oxv, which is based on the “extended viologen” (ExV) ligand, was synthesized. The Zn−Oxv exhibited reversible photochromism, photomodulated fluorescence, electrochromism and electrofluorochromism. Furthermore, we prepared Zn−Oxv thin films and investigated electrochromic (EC) properties of viologen−based CPs for the first time. Zn−Oxv thin films showed excellent EC performance with a rapid switching speed (both coloring and bleaching time within 1 s), high coloration efficiency (102.9 cm²/C) and transmittance change (exceeding 40%). Notably, the Zn−Oxv is by far the fastest CP EC material based on redox−active ligands ever reported, indicating that the viologen−based CPs could open up a new field of materials for EC applications. Therefore, viologen−based CPs are attractive candidates for the design of novel multi−responsive chromogenic materials and EC materials that could promise creative applications in intelligent technology, dynamic displays and smart sensors.

Radical Anions and Dianions of Naphthalenediimides Generated within Layer-by-Layer Zirconium Phosphonate Thin Films

Chemical reduction of N,N'-bis(2-phosphonoethyl)-1,4,5,8-naphthalenediimide (PNDI) with the reducing agent sodium dithionite gave stable colored reduced species, both in homogeneous solutions and in self-assembled thin films. When colorless PNDI aqueous solutions were titrated with the reducing agent, stepwise reduction was observed, giving first the radical anion (PNDI^-•) and then the dianion (PNDI^2-) species, which were detected by UV-visible-NIR spectroscopy, allowing the unambiguous determination of absorption maxima and molar absorptivities for each species. The radical anion PNDI^-• was found to form π-dimers in water, but monomeric PNDI^-• was formed in the presence of the cationic surfactant cetyltrimethylammonium bromide, indicating association with the micelles. Thin films of PNDI with 25 layers were grown by the zirconium phosphonate method on quartz substrates. Reduction of the films with sodium dithionite also produced radical anions and dianions of PNDI. However, reduction in the films was much slower than in solution, evidencing the compactness of the films. Moreover, reduction in the films did not proceed to completion, even with excess of the reducing agent, which can be attributed to the repulsion of negative charges within the film.