2D-VN2 MXene as a novel anode material for Li, Na and K ion batteries: Insights from the first-principles calculations

Ab Initio Prediction of Two-Dimensional GeSiBi2 Monolayer as Potential Anode Materials for Sodium-Ion Batteries

The conceptualization and deployment of electrode materials for rechargeable sodium-ion batteries are key concerns for next-generation energy storage systems. In this contribution, the configuration stability of single-layer GeSiBi2 is systematically discussed based on first-principles calculations, and its potential as an anode material is further investigated. It is demonstrated that the phonon spectrum confirms the dynamic stability and the adsorption energy identifies a strong interaction between Na atoms and the substrate material. The electronic bands indicative of inherent metallicity contribute to the enhancement of electronic conductivity after Na adsorption. The multilayer adsorption of Na provides a theoretical capacity of 361.7 mAh/g, which is comparable to that of other representative two-dimensional anode materials. Moreover, the low diffusion barriers of 0.19 and 0.15 eV further guarantee the fast diffusion kinetics. These contributions signal that GeSiBi2 can be a compatible candidate for sodium-ion batteries anodes.

Two-dimensional monolayer C5-10-16: a metallic carbon allotrope as an anode material for high-performance sodium/potassium-ion batteries

Carbonaceous materials are promising candidates as anode materials for non-lithium-ion batteries (NLIBs) due to their appealing properties such as good electrical conductivity, low cost, and high safety. However, graphene, a classic two-dimensional (2D) carbon material, is chemically inert to most metal atoms, hindering its application as an electrode material for metal-ion batteries. Inspired by the unique geometry of a four-penta unit, we explore a metallic 2D carbon allotrope C5-10-16 composed of 5-10-16 carbon rings. The C5-10-16 monolayer is free from any imaginary frequencies in the whole Brillouin zone. Due to the introduction of a non-sp2 hybridization state into C5-10-16, the extended conjugation of π-electrons is disrupted, leading to the enhanced surface activity toward metal ions. We investigate the performance of C5-10-16 as the anode for sodium/potassium-ion batteries by using first-principles calculations. The C5-10-16 sheet has high theoretical specific capacities of Na (850.84 mA h g-1) and K (743.87 mA h g-1). Besides, C5-10-16 exhibits a moderate migration barrier of 0.63 (0.32) eV for Na (K), ensuring rapid charging/discharging processes. The average open-circuit voltages of Na and K are 0.33 and 0.62 V, respectively, which are within the voltage acceptance range of anode materials. The fully sodiated (potassiated) C5-10-16 shows tiny lattice expansions of 1.4% (1.3%), suggesting the good reversibility. Moreover, bilayer C5-10-16 significantly affects both the adsorption strength and the mobility of Na or K. All these results show that C5-10-16 could be used as a promising anode material for NLIBs.

MXene-based anode materials for high performance sodium-ion batteries

As an emerging class of layered transition metal carbides/nitrides/carbon-nitrides, MXenes have been one of the most investigated anode subcategories for sodium ion batteries (SIBs), due to their unique layered structure, metal-like conductivity, large specific surface area and tunable surface groups. In particular, different MAX precursors and synthetic routes will lead to MXenes with different structural and electrochemical properties, which actually gives MXenes unlimited scope for development. In this feature article, we systematically present the recent advances in the methods and synthetic routes of MXenes, together with their impact on the properties of MXenes and also the advantages and disadvantages. Subsequently, the sodium storage mechanisms of MXenes are summarized, as well as the recent research progress and strategies to improve the sodium storage performance. Finally, the main challenges currently facing MXenes and the opportunities in improving the performance of SIBs are pointed out.

An investigation of halogen induced improvement of β12 borophene for Na/Li storage by density functional theory

Pristine and halogen doped β12 borophene, as anode of lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs), was considered by first-principles study based on density functional theory. Li and Na were adsorbed on β12 borophene with adsorption energies of -3.18 eV and -2.33 eV, respectively. The effect of halogen addition, X = F, Cl, Br, and I, to borophene sheet on adsorption and also diffusion pathways of Li and Na was studied. The adsorption energy calculations show that the halogen atoms improve Li/Na adsorption on borophene sheet. Also, the results indicate that Li/Na adsorption energies on Brominated borophene sheet are higher compared to other halogen types. Diffusion calculations show that Br addition induces an electron deficiency on BoBr surface which lowers the energy barrier of migration of Li and Na ions compared to the pristine borophene. According to density of states analysis, electron charge is transferred from Li and Na atoms toward halogenated borophene sheet. Also, it can be concluded that electron transfer from Li/Na to borophene host in BoX is higher compared to pristine borophene which is in agreement with adsorption energies. The fully lithiated/sodiated complexes of BoBr are Li_0.71BoBr and Na_0.50BoBr which is equivalent to theoretical specific capacities of 1401 and 981 mAh/g which are about 3.5 and 2.6 times higher than graphite for Li and Na adsorption, respectively. Higher specific capacity of Li compared to Na is mainly attributed to steric hindrance of Na regarding its greater size. Open circuit voltage values of 1.6 V and 1.4 V were obtained for Li and Na intercalation processes, respectively, into halogen added β₁₂ borophene indicating that this structure can be applied as anode for both LIB and SIB systems.

A two-dimensional metallic SnB monolayer as an anode material for non-lithium-ion batteries

Na-, K- and Mg-ion batteries (NIBs, KIBs and MIBs) have drawn considerable interest due to their high abundance and excellent safety. However, the lack of high-performance anode materials is a major obstacle to its development. A metallic SnB planar monolayer is predicted by using the two-dimensional global minimum structure search method of swarm intelligence. Based on first-principles calculations, we proved that the metal SnB monolayer has high binding energy and excellent dynamical, thermal and mechanical stability. It is worth noting that the SnB monolayer has several stable adsorption sites for Na-, K- and Mg-ions, so it has a high theoretical capacity of 620.93, 517.44 and 620.93 mA h g^-1, respectively. For Na-, K- and Mg-ion batteries, the low diffusion barriers of the SnB monolayer are 0.22, 0.07 and 0.68 eV, and the low average open circuit voltages are 0.42, 0.49 and 0.23 V, which ensure long service life and fast charging in practical applications. In addition, it is proved that the SnB monolayer maintains excellent conductivity and stability during the charge-discharge process. The results show that the SnB monolayer offers innovative advantages for the development of new two-dimensional planar structures that further advance the development of anode materials for metal ion batteries.

Two-dimensional B[Formula: see text]C as a potential anode material for Mg-ion batteries with extremely high theoretical capacity

The development of new high-capacity anode materials using ions other than lithium as a charge carrier is one of the essential strategies in searching for next-generation high-performance rechargeable batteries. Herein, using first-principles computations, we explore a B[Formula: see text]C monolayer as a potential anode material for Mg-ion batteries. The high stability of the free-standing B[Formula: see text]C monolayer has been demonstrated via calculating the adsorption energy, phonon dispersion, and ab-initio molecular dynamics simulations. The metallic character of the B[Formula: see text]C monolayer, desirable from the point of view of energy storage, ensures good electronic conductivity during the battery charge/discharge process. The calculated migration energy barrier, open-circuit voltage, and theoretical specific capacity of the B[Formula: see text]C monolayer are much better than those of some other two-dimensional materials. These findings provide the B[Formula: see text]C monolayer as a potential candidate for Mg-ion battery anode material with a high theoretical specific capacity of 3187.55 mAh/g.

Two-Dimensional V2N MXene Monolayer as a High-Capacity Anode Material for Lithium-Ion Batteries and Beyond: First-Principles Calculations

Two-dimensional metallic electrode materials with high energy density and excellent rate capability are crucial in rechargeable ion batteries. In this work, two-dimensional V₂N MXene monolayer has been predicted to be an attractive candidate anode material for rechargeable lithium, sodium, and magnesium ion batteries by first-principles calculations. We observe that V₂N monolayer is a metallic compound. The ion diffusion barriers on V₂N monolayer are predicted to be 0.025, 0.014, 0.004, and 0.058 eV for Li, Na, K, and Mg ions, respectively, which are rather low on the state-of-the-art two-dimensional energy storage materials. In addition, the calculated theoretical capacities of V₂N MXene monolayer are 925 mAh/g for Li ion, 463 mAh/g for Na ion, and 1850 mAh/g for Mg ion. The capacity of Li ions on V₂N monolayer is much higher than that of Li ions on the conventional anode graphite, and the extralarge capacity for Mg ions on V₂N monolayer is ascribed to the two-electron reaction and multilayer adsorption of Mg ions. Last, the average open circuit voltages of the V₂N MXene monolayer are also calculated to be 0.32 V for Li ions, 0.24 V for Na ions, and 0.34 V for Mg ions. These results provide a fundamental insight into electrochemical energy storage applications of two-dimensional V₂N MXene monolayer as a suitable candidate anode material for rechargeable Li, Na, and Mg ion batteries on the atomic scale.

New family of layered N-based cathode materials for sodium-ion batteries

Layered 2H-phase CrN2 possesses many advantages including high capacity (335 mA h g−1), low diffusion barrier (0.49 eV), high voltage platform (3.8 V) and high energy density (1139 W h kg−1), which is a promising candidate for SIBs cathode materials.

First-principles identification of interface effect on Li storage capacity of C3N/graphene multilayer heterostructure

The design and development of new and light weight two-dimensional (2D) heterostructures as anode materials to enhance the electrochemical properties for Li-ion batteries (LIB's) is a challenge. In this work, using first-principles study, we have demonstrated that the ratio of two-dimensional polyaniline (C₃N) and graphene in the multilayer heterostructures plays a major role to define the Li storage properties and to provide metallicity for easy conduction of electrons. We have found that charge transfer between Li and the host depends on the interface and site, which helps in the improvement in specific capacity. The proposed heterostructures shows specific capacity varies from 558 mAh/gm to 423 mAh/gm. The specific capacity is high for heterostructures with more graphene in ratio which is correlated to higher charge accumulation in the host. Also, graphene helps to minimize the open-circuit voltage (OCV) of C₃N and maintained an average of 0.4 V. The volume expansion for fully lithiated heterostructures is within 22 %. Li diffusion barrier energy varies in the range of 0.57 to 0.25 eV. The proposed 2D heterostructures could be a future material for anode in LIB's and the description of the interface effect on Li storage properties will help for further development of 2D heterostructure materials.