Tuning morphology of Pickering emulsions stabilised by biodegradable PLGA nanoparticles: How PLGA characteristics influence emulsion properties

Interfacial Behavior of Biodegradable Poly(lactic-co-glycolic acid)-Pluronic F127 Nanoparticles and Its Impact on Pickering Emulsion Stability

Biodegradable nanoparticle-based emulsions exhibit immense potential in various applications, particularly in the pharmaceutical, cosmetic, and food industries. This study delves into the intricate interfacial behavior of Pluronic F127 modified poly(lactic-co-glycolic acid) (PLGA-F127) nanoparticles, a crucial determinant of their ability to stabilize Pickering emulsions. Employing a combination of Langmuir balance, surface tension, and diffusion coefficient measurements, we investigate the interfacial dynamics of PLGA-F127 nanoparticles under varying temperature and ionic strength conditions. Theoretical calculations are employed to elucidate the underlying mechanisms governing these phenomena. Our findings reveal a profound influence of temperature-dependent Pluronic layer behavior and electrostatic and steric interactions on the interfacial dynamics. Nonlinear changes in surface tension are observed, reflecting the interplay of these factors. Particle aggregation is found to be prevalent at elevated temperatures and ionic strengths, compromising the stability and emulsification efficiency of the formed emulsions. This work provides insights into the rational design of stable and efficient biodegradable nanoparticle-based Pickering emulsions, broadening their potential applications in various fields.

Particle shape anisotropy in pickering interfacial catalysis for Knoevenagel condensation

Dispersions of two immiscible liquids stabilized by solid particles are termed as Pickering emulsions. Stability of such emulsions is affected by various parameters such as amount of solid particle, method of emulsification, size, and shape of particles, etc. In this study, MgO samples prepared by different methods and characterized by XRD, FESEM, HRTEM, DLS, and CO2-TPD techniques were utilized for stabilizing o/w Pickering emulsions. The effect of particle shape on Pickering Interfacial Catalysis (PIC) for Knoevenagel condensation was investigated. It was found that in the case of rod and plate shaped particles, emulsion stability and catalytic activity were higher as compared to those obtained with other MgO samples prepared. The applicability of the MgO-PIC system is also successfully demonstrated for gram scale synthesis (85 % yield in 30 min). The MgO-PIC system was found to be reusable for at least five cycles without substantial loss in activity.

Application of Pistacia atlantica Pickering emulsion-filled chitosan gel for targeted delivery of curcumin

Emulsion-filled hydrogels are a growing system in the food industry for delivering bioactive compounds. In this study, Baneh gum (BG) particles were prepared as a Pickering emulsion stabilizer for curcumin delivery. Then, BG Pickering emulsion was added to the chitosan solution (1.5%, 2.0%, and 2.5% w/w) in different Pickering emulsion (PE):hydrogel (HYD) ratios (1:3, 1:5, and 1:7) to create an emulsion-filled gel. The highest amount of Cur stability after the 3rd week of storage was observed in the sample containing 2.0% CS and a 1:7 PE:HYD ratio (97.36%). Pickering emulsion and emulsion-filled gel significantly protected the antioxidant activity of curcumin against the thermal process (p < .05). Curcumin loading in the emulsion-filled gel provided better protection against the gastric condition compared to the emulsion system. The chitosan hydrogel swells in an acidic environment, but its combination with the anionic structure of the emulsion causes a lower release of curcumin in the stomach environment, which can help the stability of curcumin in the digestive system and have a controlled release in the gastrointestinal tract.

The Effect of Different Factors on Poly(lactic-co-glycolic acid) Nanoparticle Properties and Drug Release Behaviors When Co-Loaded with Hydrophilic and Hydrophobic Drugs

Poly(lactic-co-glycolic acid) nanoparticles (PLGA NPs) are versatile drug nanocarriers with a wide spectrum of applications owing to their extensive advantages, including biodegradability, non-toxic side effects, and low immunogenicity. Among the numerous nanoparticle preparation methods available for PLGA NPs (the hydrophobic polymer), one of the most extensively utilized preparations is the sonicated-emulsified solvent evaporation method, owing to its simplicity, speed, convenience, and cost-effectiveness. Nevertheless, several factors can influence the outcomes, such as the types of concentration of the surfactants and organic solvents, as well as the volume of the aqueous phase. The objective of this article is to explore the influence of these factors on the properties of PLGA NPs and their drug release behavior following encapsulation. Herein, PLGA NPs were fabricated using bovine serum albumin (BSA) as a surfactant to investigate the impact of influencing factors, including different water-soluble organic solvents such as propylene carbonate (PC), ethyl acetate (PA), and dichloromethane (DCM). Notably, the size of PLGA NPs was smaller in the EA group compared to that in the DCM group. Moreover, PLGA NPs showed excellent stability, ascribed to the presence of the BSA surfactant. Furthermore, PLGA NPs were co-loaded with varying concentrations of hydrophilic drugs (doxorubicin hydrochloride) and hydrophobic drugs (celecoxib), and exhibited pH-sensitive drug release behavior in PBS with pH 7.4 and pH 5.5.

Fabrication and evaluation of 3D printed poly(l-lactide) copolymer scaffolds for bone tissue engineering

The application of poly(L-lactic acid) (PLLA) in tissue engineering is limited due to its brittleness and uncontrollable degradation rate. In this study, the flexible p-dioxanone (PDO) and highly reactive glycolide (GA) units were introduced into PLLA segments by chemical modification to prepare poly(l-lactide-ran-p-dioxanone-ran-glycolide) (PLPG) copolymers. The copolymers were then processed into the PLPG scaffold by a 3D printing technology. The physicochemical properties of the PLPG copolymers were studied by NMR, DSC, XRD, GPC, and SEM. Furthermore, the mechanical properties, degradation properties, and biocompatibility of the PLPG scaffolds were also studied. The results showed that introducing PDO and GA units disrupted the regularity of PLLA, decreasing the crystallinity of the PLPG copolymers. However, introducing PDO and GA units could effectively improve the mechanical and degradation properties of the PLLA scaffolds. In vitro cell culture experiments indicated that the PLPG scaffolds supported proliferation, growth, and differentiation of MC3T3-E1 cells. The PLPG scaffolds reported herein, with controllable degradation rates and mechanical performance, may find applications in bone tissue engineering.

A Versatile Brij-Linker for One-Step Preparation of Targeted Nanoparticles

Background: Most frequently the functionalization of nanoparticles is hampered by time-consuming, sometimes harsh conjugation and purification procedures causing premature drug release and/or degradation. A strategy to circumvent multi-step protocols is to synthesize building blocks with different functionalities and to use mixtures thereof for nanoparticle preparation in one step. Methods: BrijS20 was converted into an amine derivative via a carbamate linkage. The Brij-amine readily reacts with pre-activated carboxyl-containing ligands such as folic acid. The structures of the building blocks were confirmed by different spectroscopic methods and their utility was assessed by one-step preparation and characterization of nanoparticles applying PLGA as a matrix polymer. Results: Nanoparticles were about 200 nm in diameter independent of the composition. Experiments with human folate expressing single cells and monolayer revealed that the nanoparticle building block Brij mediates a "stealth" effect and the Brij-amine-folate a "targeting" effect. As compared to plain nanoparticles, the stealth effect decreased the cell interaction by 13%, but the targeting effect increased the cell interaction by 45% in the monolayer. Moreover, the targeting ligand density and thus the cell association of the nanoparticles is easily fine-tuned by selection of the initial ratio of the building blocks. Conclusions: This strategy might be a first step towards the one-step preparation of nanoparticles with tailored functionalities. Relying on a non-ionic surfactant is a versatile approach as it might be extended to other hydrophobic matrix polymers and promising targeting ligands from the biotech pipeline.

Pickering Emulsions Stabilized With Biodegradable Nanoparticles For The Co-Encapsulation Of Two Active Pharmaceutical Ingredients

Innovative Pickering emulsions co-encapsulating two active pharmaceutical ingredients (API) were formulated for a topical use. An immunosuppressive agent, either cyclosporine A (CysA) or tacrolimus (TAC), was encapsulated at high drug loading in biodegradable and biocompatible poly (lactic-co-glycolic acid) (PLGA) nanoparticles (NP). These NP stabilized the oil droplets (Miglyol) containing an anti-inflammatory drug, calcitriol (CAL). The influence of the API on the physico-chemical properties of these emulsions were studied. Emulsions formulated with or without API had a similar macroscopic and microscopic structure, as well as interfacial properties, and they exhibited a good stability for at least 55 days. The emulsions did not alter the viability of human keratinocytes (HaCaT cell line) after 2 and 5 days of exposure to NP concentrations equivalent to efficient API dosages. Thus, these new Pickering emulsions appear as a promising multidrug delivery system for the treatment of chronical inflammatory skin diseases.

Cationic Nanoparticle-Stabilized Vaccine Delivery System for the H9N2 Vaccine to Promote Immune Response in Chickens

Chinese yam polysaccharides (CYPs) have received wide attention for their immunomodulatory activity. Our previous studies had discovered that the Chinese yam polysaccharide PLGA-stabilized Pickering emulsion (CYP-PPAS) can serve as an efficient adjuvant to trigger powerful humoral and cellular immunity. Recently, positively charged nano-adjuvants are easily taken up by antigen-presenting cells, potentially resulting in lysosomal escape, the promotion of antigen cross-presentation, and the induction of CD8 T-cell response. However, reports on the practical application of cationic Pickering emulsions as adjuvants are very limited. Considering the economic damage and public-health risks caused by the H9N2 influenza virus, it is urgent to develop an effective adjuvant for boosting humoral and cellular immunity against influenza virus infection. Here, we applied polyethyleneimine-modified Chinese yam polysaccharide PLGA nanoparticles as particle stabilizers and squalene as the oil core to fabricate a positively charged nanoparticle-stabilized Pickering emulsion adjuvant system (PEI-CYP-PPAS). The cationic Pickering emulsion of PEI-CYP-PPAS was utilized as an adjuvant for the H9N2 Avian influenza vaccine, and the adjuvant activity was compared with the Pickering emulsion of CYP-PPAS and the commercial adjuvant (aluminum adjuvant). The PEI-CYP-PPAS, with a size of about 1164.66 nm and a ζ potential of 33.23 mV, could increase the H9N2 antigen loading efficiency by 83.99%. After vaccination with Pickering emulsions based on H9N2 vaccines, PEI-CYP-PPAS generated higher HI titers and stronger IgG antibodies than CYP-PPAS and Alum and increased the immune organ index of the spleen and bursa of Fabricius without immune organ injury. Moreover, treatment with PEI-CYP-PPAS/H9N2 induced CD4⁺ and CD8⁺ T-cell activation, a high lymphocyte proliferation index, and increased cytokine expression of IL-4, IL-6, and IFN-γ. Thus, compared with the CYP-PPAS and aluminum adjuvant, the cationic nanoparticle-stabilized vaccine delivery system of PEI-CYP-PPAS was an effective adjuvant for H9N2 vaccination to elicit powerful humoral and cellular immune responses.

DEC-205 receptor targeted poly(lactic-co-glycolic acid) nanoparticles containing Eucommia ulmoides polysaccharide enhances the immune response of foot-and-mouth disease vaccine in mice

Nanoparticles targeting the DEC-205 receptor were found to induce antigen-specific protective immune response. When the delivery system carries both antigens and immunomodulators, it can maximize the expected therapeutic effect of the drug and induce effective humoral and cellular immune responses to antigens.In this study, we encapsulated the Eucommia ulmoides Oliv. polysaccharides (EUPS) into PLGA nanoparticles (NPs) and conjugated it with anti-CD205 monoclonal Ab (MAb) to produce a DEC-205 receptor targeted PLGA nanoparticles (anti-DEC-205-EUPS-PLGA NPs). The physicochemical characteristics and adjuvant activity of the above NPs were evaluated in vitro and in vivo. In the in vitro setting, 200 μg·mL^-1 anti-DEC-205-EUPS-PLGA could improve the proliferation of DCs and promote their antigen up-take activity. In the in vivo setting, anti-DEC-205-EUPS-PLGA NPs remarkably controlled the release of drug and antigen to induce sustained immune responses and up-regulated the levels of FMDV-specific IgG antibodies, promoted the cytotoxic activity of CTLs and NK cells, and improved the proliferation of splenocytes. Moreover, the anti-DEC-205-EUPS-PLGA NPs facilitated the maturation of DCs. The above data indicated that anti-DEC-205-EUPS-PLGA NPs employed as an targeted adjuvant induced the humoral and cellular immune activity by promoting the maturation of DCs. These findings may provide a new insight onto the development of vaccine adjuvants.

Bridging the gap between fundamental research and product development of long acting injectable PLGA microspheres

INTRODUCTION

Long acting Injectable PLGA microspheres have gained more and more interest and attention in the field of life cycle management of pharmaceutical products due to their biocompatibility and biodegradability. So far, a multitude of trial-and-error experiments at lab scale have been used for establishing the correlation relationship between critical process parameters, critical material attributes and critical quality attributes. However, few published studies have elaborated on the development of PLGA microspheres from an industrial perspective.

AREAS COVERED

In this review, the scale-up feasibility of translational technologies of PLGA microspheres manufacturing have been evaluated. Additionally, state-of-the-art of technologies and facilities in PLGA development have been summarized. Meanwhile, the industrial knowledge matrix of PLGA microspheres development and research are establishing which provide comprehensive insight for understanding properties of PLGA microspheres as controlled/sustained release vehicle.

EXPERT OPINION

There is still big gap between fundamental research in academic institute and product development in pharmaceuticals. Therefore, the difference and connection between them should be identified gradually for better understanding of PLGA microspheres development.

Fabrication and characterization of Chinese yam polysaccharides PLGA nanoparticles stabilized Pickering emulsion as an efficient adjuvant

The Chinese yam polysaccharides PLGA nanoparticles were applied as stabilizers in this study to prepare O/W Pickering emulsion. The optimized preparation conditions were PLGA concentration of 5 mg/mL, ultrasonic power of 50 %, and ultrasonic time of 2 min. The CYP-PPAS emulsion exhibits a raspberry-like morphology with a large number of nanoparticles surrounding the oil droplets. The CYP-PPAS emulsion exhibited outstanding stability at 4 °C and 37 °C for 28 days with high antigen loading efficiency and provided a controlled and sustained release of Chinese yam polysaccharides and OVA antigen in vitro. CYP-PPAS/OVA elicited robust antigen-specific immune response and induced a mixed Th1/Th2 immune response after immunization. Furthermore, CYP-PPAS/OVA caused a high CD4+/CD8+ ratio leading in increased activation of splenic T lymphocytes subpopulations. Moreover, CYP-PPAS is a safe vaccination adjuvant with high safety profile in vivo. Thus, the novel designed Pickering emulsion CYP-PPAS was a safe and effective adjuvant for inducing the strong and long-term immune response.

Glass Transition Temperature of PLGA Particles and the Influence on Drug Delivery Applications

Over recent decades, poly(lactic-co-glycolic acid) (PLGA) based nano- and micro- drug delivery vehicles have been rapidly developed since PLGA was approved by the Food and Drug Administration (FDA). Common factors that influence PLGA particle properties have been extensively studied by researchers, such as particle size, polydispersity index (PDI), surface morphology, zeta potential, and drug loading efficiency. These properties have all been found to be key factors for determining the drug release kinetics of the drug delivery particles. For drug delivery applications the drug release behavior is a critical property, and PLGA drug delivery systems are still plagued with the issue of burst release when a large portion of the drug is suddenly released from the particle rather than the controlled release the particles are designed for. Other properties of the particles can play a role in the drug release behavior, such as the glass transition temperature (T_g). The T_g, however, is an underreported property of current PLGA based drug delivery systems. This review summarizes the basic knowledge of the glass transition temperature in PLGA particles, the factors that influence the T_g, the effect of T_g on drug release behavior, and presents the recent awareness of the influence of T_g on drug delivery applications.

Pickering Emulsions and Antibubbles Stabilized by PLA/PLGA Nanoparticles

Micrometer-sized double emulsions and antibubbles were produced and stabilized via the Pickering mechanism by colloidal interfacial layers of polymeric nanoparticles (NPs). Two types of nanoparticles, consisting either of polylactic acid (PLA) or polylactic-co-glycolic acid (PLGA), were synthesized by the antisolvent technique without requiring any surfactant. PLA nanoparticles were able to stabilize water-in-oil (W/O) emulsions only after tuning the hydrophobicity by means of a thermal treatment. A water-in-oil-in-water (W/O/W) emulsion was realized by emulsifying the previous W/O emulsion in a continuous water phase containing hydrophilic PLGA nanoparticles. Both inner and outer water phases contained a sugar capable of forming a glassy phase, while the oil was crystallizable upon freezing. Freeze drying the double emulsion allowed removing the oil and water and replacing them with air without losing the three-dimensional (3D) structure of the original emulsion owing to the sugar glassy phase. Reconstitution of the freeze-dried double emulsion in water yielded a dispersion of antibubbles, i.e., micrometric bubbles containing aqueous droplets, with the interfaces of the antibubbles being stabilized by a layer of adsorbed polymeric nanoparticles. Remarkably, it was possible to achieve controlled release of a flourescent probe (calcein) from the antibubbles through heating to 37 °C leading to bursting of the antibubbles.

Non-Ionic Surfactants for Stabilization of Polymeric Nanoparticles for Biomedical Uses

Surfactants are essential in the manufacture of polymeric nanoparticles by emulsion formation methods and to preserve the stability of carriers in liquid media. The deposition of non-ionic surfactants at the interface allows a considerable reduction of the globule of the emulsion with high biocompatibility and the possibility of oscillating the final sizes in a wide nanometric range. Therefore, this review presents an analysis of the three principal non-ionic surfactants utilized in the manufacture of polymeric nanoparticles; polysorbates, poly(vinyl alcohol), and poloxamers. We included a section on general properties and uses and a comprehensive compilation of formulations with each principal non-ionic surfactant. Then, we highlight a section on the interaction of non-ionic surfactants with biological barriers to emphasize that the function of surfactants is not limited to stabilizing the dispersion of nanoparticles and has a broad impact on pharmacokinetics. Finally, the last section corresponds to a recommendation in the experimental approach for choosing a surfactant applying the systematic methodology of Quality by Design.