One-step phosphorization preparation of gradient-P-doped CdS/CoP hybrid nanorods having multiple channel charge separation for photocatalytic reduction of water

A novel dual S-scheme Co9S8/MnCdS/Co3O4 heterojunction for photocatalytic hydrogen evolution under visible light irradiation

Rational design and synthesis of a unique heterojunction photocatalyst structure is an important strategy to enhance its performance and structural stability. Herein, Co9S8/MnCdS/Co3O4 photocatalysts with double S-scheme heterojunctions were successfully prepared by coupling Co9S8 and Co3O4 sheet structures with n-type MnCdS nanoparticles through a simple solvothermal and mechanical mixing method. The construction of the dual S-scheme heterostructure offers the possibility to expand the light absorption range, extend the carrier lifetime and maximise the redox capacity. In addition, the mechanism of charge transfer and the reason for the improvement of photocatalytic activity were explored through photoelectrochemical characterization. The lamellar structures of Co9S8 and Co3O4 not only provide excellent dispersion and slow down the agglomeration of MnCdS nanoparticles, but also promote charge transfer, which improves the photocatalytic hydrogen production effect. Under simulated solar irradiation, the evolution rate of H2 after 5 h was as high as 46.44 μmol, which was 3.49 and 1.49 times higher than those of pristine MnCdS and MnCdS/Co3O4, respectively. Meanwhile, it has good stability under 20 h irradiation. This work demonstrates a novel idea for the rational design of double S-scheme photocatalysts with efficient space separation.

Directional Charge Pumping from Photoactive P-doped CdS to Catalytic Active Ni2P via Funneled Bandgap and Bridged Interface for Greatly Enhanced Photocatalytic H2 Evolution

Loading cocatalysts onto semiconductors is one of the most popular strategies to inhibit charge recombination, but the efficiency is generally hindered by the localized built-in electric field and the weakly connected interface. Here, this work designs and synthesizes a 1D P-doped CdS nanowire/Ni2P heterojunction with gradient doped P to address the challenges. In the composite, the gradient P doping not only creates a funneled bandgap structure with a built-in electric field oriented from the bulk of P-CdS to the surface, but also facilitates the formation of a tightly connected interface using the co-shared P element. Consequently, the photogenerated charge carriers are enabled to be pumped from inside to surface of the P-CdS and then smoothly across the interface to the Ni2P. The as-obtained P-CdS/Ni2P displays high visible-light-driven H2 evolution rate of ≈8265 µmol g-1 h-1, which is 336 times and 120 times as that of CdS and P-CdS, respectively. This work is anticipated to inspire more research attention for designing new gradient-doped semiconductor/cocatalyst heterojunction photocatalysts with bridged interface for efficient solar energy conversion.

Regulation of Electronic Structures of the Urchin-Like NiCoP/CoP Nanocatalysts for Fast Hydrogen Evolution

The exploration of stable, efficient, and low-cost catalysts toward ammonia borane hydrolysis is of vital significance for the practical implementation of this hydrogen production technology. Integrating interface engineering and nano-architecture engineering is a favorable strategy to elevate catalytic performance, as it can modify the electronic structure and provide sufficient active sites simultaneously. In this work, urchin-like NiCoP/CoP heterostructures are prepared via a three-step hydrothermal-oxidation-phosphorization synthesis route. It is demonstrated that the original Ni/Co molar ratio and the amount of phosphorus are crucial for adjusting the morphology, enhancing the exposed surface area, facilitating charge transfer, and modulating the adsorption and activation of H2O molecules. Consequently, the optimal Ni1Co2P heterostructure displays remarkable catalytic properties in the hydrolysis of ammonia borane with a turnover frequency (TOF) value of 30.3 molH2 ⋅ min-1 ⋅ molmetal -1, a low apparent activation energy of 25.89 kJ ⋅ mol-1, and good stability. Furthermore, by combining infrared spectroscopy and isotope kinetics experiments, a possible mechanism for the hydrolysis of ammonia borane was proposed.

Dual-defect semiconductor photocatalysts for solar-to-chemical conversion: advances and challenges

Among the renewable energy technologies to deal with increasing energy crisis and environmental concerns, solar-to-chemical conversion via photocatalysis holds great promise for sustainable energy supply. To date, a variety of modification strategies with different types of semiconducting materials have been proposed to boost photocatalytic efficiency. Recently, dual-defect semiconductor photocatalysts have emerged as an advantageous candidate with superior performance in improving photocatalytic activity compared to their defect-free or single-defect counterparts. In this review, focus is laid on the advances of dual-defect semiconductor photocatalysts for energy photocatalysis. Possible schemes for two different defects within a single semiconductor are firstly sorted based on the types of defects, and synthesis strategies to achieve various defect schemes as well as techniques to characterize different defects are then introduced. In particular, the effect of different defects on photocatalytic performance is emphasized, and the advances in dual-defect semiconductors for solar-to-chemical conversions are summarized based on different defect schemes. Finally, the future challenges and opportunities of dual-defect semiconductors for photocatalysis are discussed. This article is expected to provide an overall insight into existing dual-defect semiconductor photocatalysts and inspire the development of new defect-rich materials for photocatalytic energy production.

Nickel-Based Bifunctional Cocatalyst to Enhance CdS Photocatalytic Hydrogen Production

The design of nanocomposites as a light-capturing system applied in photocatalytic water splitting is an emerging area of research. In our study, a simple in situ photodeposition method was proposed for the synthesis of CdS nanoflowers modified by nickel-based bifunctional, i.e., Ni/Ni(OH)2, cocatalysts. The introduction of cocatalysts has demonstrated a notable enhancement in the photocatalytic hydrogen evolution efficiency of CdS. The quantity of cocatalysts supported on CdS played an important role in governing the light absorption capability and photocatalytic efficacy. Ni-CdS-10 showed the best photocatalytic activity of 30.51 mmol g-1 h-1, which was 1.8 times and 2.6 times higher activity than Pt-CdS-1 wt % and pure CdS, respectively. Mechanism studies with UV-vis DRS, photoluminescence, and Mott-Schottky plots revealed the intrinsic electric field created at the p-n Ni(OH)2/CdS junctions, which can effectively implement the transport and separation of photoinduced carriers. From linear sweep voltammetry, electrochemical impedance spectroscopy, and DFT calculation, both Ni(OH)2 and Ni can effectively decrease the Gibbs free energies of hydrogen adsorption and reduce the overpotential of hydrogen evolution. As a result, the efficiency of generating H2 through photocatalysis experienced significant improvement, and the participation of bifunctional cocatalysts further reduced the photocorrosion of CdS, enhanced stability, improved low price, and efficient photocatalyst production.

Construction of S-Scheme heterojunction Ni11(HPO3)8(OH)6/CdS photocatalysts with open framework surface for enhanced H2 evolution activity

The emerging S-scheme heterojunction shows a particular superiority in enhancing the efficiency of charge separation in photocatalyst. Herein, a Ni₁₁(HPO₃)₈(OH)₆/CdS heterojunctions (NiPO/CdS) are constructed for the first time by loading open framework structure NiPO on the surface of CdS nanoparticles (CdS NPs). The built-in electric field generated at the interface promotes the directional migration of photogenerated electrons from NiPO to CdS. This S-scheme pathway achieves a strong redox capacity and efficient carrier separation. More importantly, the unique triangular and hexagonal channels of NiPO facilitate the exposure of CdS active sites for proton adsorption, H₂ production and escape. The hydrogen evolution rate of NiPO/CdS is 39 mmol g^-1 h^-1 under visible light irradiation, which is 6.5 times higher than that of pure CdS. The NiPO/CdS heterojunction also exhibits remarkable long-term stability. This study provides a new strategy for the ingenious design of S-scheme photocatalysts with excellent photocatalytic performance.

Ultrafast charge separation in a WC@C/CdS heterojunction enables efficient visible-light-driven hydrogen generation

The rapid recombination of photogenerated carriers and strong photocorrosion have considerably limited the practical application of CdS in the field of photocatalysis. Loading a cocatalyst has been widely utilized to largely enhance photocatalytic activity. In the present work, a WC@C cocatalyst was prepared by a novel molten salt method and explored as an efficient noble-metal-free cocatalyst to significantly enhance the photocatalytic hydrogen evolution rate of CdS nanorods. The WC@C/CdS composite photocatalyst with a 7 wt% content of WC@C showed the highest photocatalytic hydrogen evolution rate of 8.84 mmol g^-1 h^-1, which was about 21 and 31 times higher than those of CdS and 7 wt% Pt/CdS under visible light irradiation. A high apparent quantum efficiency (AQY) of 55.28% could be achieved under 420 nm monochromatic light. Furthermore, the photocatalytic activity of the 7 wt% WC@C/CdS photocatalyst exhibited good stability for 12 consecutive cycles of the photocatalytic experiment with a total reaction time of 42 h. The excellent photocatalytic performance of the photocatalyst was attributed to the formation of a Schottky junction and the loading cocatalyst, which not only accelerated the separation of the photogenerated carrier but also provided a reactive site for hydrogen evolution. This work revealed that WC@C could act as an excellent cocatalyst for enhancing the photocatalytic activity of CdS nanorods.

Co0.9Co0.1S Nanorods with an Internal Electric Field and Photothermal Effect Synergistically for Boosting Photocatalytic H2 Evolution

The paper reports a strategy to synthesize Cd_0.9Co_0.1S nanorods (NRs) via a one-pot solvothermal method. Remarkably, the pencil-shaped Cd_0.9Co_0.1S NRs with a large aspect ratio and good polycrystalline plane structure significantly shorten the photogenerated carrier transfer path and achieve fast separation. An appropriate amount of Co addition enhances visible light-harvesting and generates a photothermal effect to improve the surface reaction kinetics and increases the charge transfer rate. Moreover, the internal electric field facilitates the separation and transfer of carriers and effectively impedes their recombination. As a result, the optimized Cd_0.9Co_0.1S NRs yield a remarkable H₂ evolution rate of 8.009 mmol·g⁻¹·h⁻¹, which is approximately 7.2 times higher than that of pristine CdS. This work improves the photocatalytic hydrogen production rate by tuning and optimizing electronic structures through element addition and using the photothermal synergistic effect.

Influence of Wurtzite ZnO Morphology on Piezophototronic Effect in Photocatalysis

A piezoelectric field promotes the photocatalytic activity of a photocatalyst by helping separating photo-generated charge carriers. Wurtzite phase ZnO is a typical photocatalyst with a piezoelectric property, thus self-assisted photocatalysis with ZnO based on the piezophototronic effect can be achieved. ZnO nanorods or nanowires with a clear c-axis have been well studied, while other morphologies have not been fully discussed. In this work, we prepared wurtzite phase ZnO with four different morphologies. By comparing their photocatalytic activity for degradation of Rhodamine B under the same mechanical energy source provided by ultrasound, the effect of morphology and exposed facets on photo-induced charge separation were highlighted. The ZnO nanowire photocatalyst delivered an impressive improvement in photocatalytic efficiency when ultrasound driven, suggesting that the morphology-related piezophototronic effect had a positive effect on separation of photo-generated charge carriers, and more exposed active facets benefitted the utilization of charge carriers.

The doping of B in ZnO@CdS for enhanced visible-light H2 production

The visible-light water splitting enhancement of B in ZnO@CdS was systematically studied and the B doped ZnO@CdS rods (B-ZnO@CdS) showed an excellent H2 generation rate of 13.1 mmol h-1g-1, mostly...

An efficient strategy to enhance the photocatalytic activity of Ir-doped SrTiO3: a hybrid DFT approach

Present study revealed that the codoping of Al, Cr, and La not only stabilize Ir in preferred oxidation state, but also form charge compensated system, thereby ensuring improved photoconversion efficiency under visible light.

Tailoring g-C3N4 with Lanthanum and Cobalt Oxides for Enhanced Photoelectrochemical and Photocatalytic Activity

Herein, the synthesis, characterization, and photoelectrochemical and photocatalytic characteristics of hydrothermally prepared La2O3–g-C3N4, CoO–g-C3N4, and La2O3–CoO–g-C3N4 are discussed. The XRD analysis and crystalline phases unveiled the impregnation of La2O3 and CoO into g-C3N4. The microscopic analysis supports the formation of g-C3N4 nanoflakes and La2O3 and CoO nanoparticles embedded homogeneously in the La2O3–CoO–g-C3N4 nanocomposite, whereas the EDX comprehended their respective elemental composition and ratios. A bandgap energy of 2.38 eV for La2O3–CoO–g-C3N4 was calculated using the Tauc plot method, complementing high visible-light activity. The solar-driven water-splitting reaction exhibited significant photocurrent efficiency (~3.75 mA/cm2), augmenting the hydrogen generation by La2O3–CoO–g-C3N4 compared to that by pure g-C3N4, La2O3–g-C3N4, and CoO–g-C3N4 in 0.5 M Na2SO4 electrolyte. The synergistic effect of La2O3 and CoO impregnation with g-C3N4 led to effective division of the photogenerated charge transporters, enhancing the photocatalytic hydrogen generation by the photocatalysts. Furthermore, photocatalytic pollutant removal, namely greater than 90% decomposition of methylene blue (MB) from water, was investigated with a pseudo-first-order reaction kinetics under 1 sun visible-light irradiation. Thus, La2O3–CoO–g-C3N4 nanocomposite was found to be a prospective material for harnessing solar energy.

Photocatalytic H2O Overall Splitting into H2 Bubbles by Single Atomic Sulfur Vacancy CdS with Spin Polarization Electric Field

Low efficient transfer of photogenerated charge carriers to redox sites along with high surface reaction barrier is a bottleneck problem of photocatalytic H₂O overall splitting. Here, in the absence of cocatalysts, H₂O overall splitting has been achieved by single-atomic S vacancy hexagonal CdS with a spin polarization electric field (PEF). Theoretical and experimental results confirm that single-atomic S vacancy-induced spin PEF with opposite direction to the Coulomb field accelerates charge carrier transport dynamics from the bulk phase to surface-redox sites. By systematically tuning the spin PEF intensity with single-atomic S vacancy content, common pristine CdS is converted to a photocatalyst that can efficiently complete H₂O overall splitting by releasing a great number of H₂ bubbles under natural solar light. This work solves the bottleneck of solar energy conversion in essence by single atom vacancy engineering, which will promote significant photocatalytic performance enhancement for commercialization.

The electrochemical, dielectric, and ferroelectric properties of Gd and Fe doped LaNiO3 with an efficient solar-light driven catalytic activity to oxidize malachite green dye

This work investigates the effects of double ion substitution on the ferroelectric, electrochemical, dielectric and photocatalytic properties of Gd and Fe doped La_1-yGd_yNi_1-xFe_xO₃ nanoparticles (NPs). La_1-yGd_yNi_1-xFe_xO₃ was fabricated by facile micro-emulsion path and its properties were studied by thermogravimetric analysis (TGA), X-ray diffraction (XRD), scanning electron microscopy (SEM), Raman scattering, Fourier Transform of Infrared (FTIR), energy dispersive x-rays (EDX) techniques. It has a distorted rhombohedral shape with crystallite size within the range of 17-23 nm. The doped material has a spherical heterogeneous morphology, and its surface area increased with increased doping. The electrochemical (CV, EIS, and I-V), conductivity and dielectric (dielectric constant and low dielectric & tangent loss) properties of La_1-yGd_yNi_1-xFe_xO₃ were dependent on the contents of the dopants (Gd and Fe). The doped material had improved specific capacitance compared to the undoped LaNiO₃ due to the synergistic effect of Gd and Fe on the doped materials. The conductivity of Gd and Fe doped LaNiO₃ 5.16 × 10⁴ Sm^-1 was enhanced compared to the undoped LaNiO₃ 3.52 × 10^-2 Sm¹. Furthermore, hysteresis loop was used to investigate the coercivity (Hc), saturation magnetization (Ms) and remanence (Mr) of the material. The Ms and Mr values were enhanced with the content of the dopants. The photocatalytic activity (PCA) of the material in degrading malachite green (MG) dye was studied. La_1-yGd_yNi_1-xFe_xO₃ NPs was able to degrade up to 96.4% of the dye under visible light irradiation in 50 min. La_1-yGd_yNi_1-xFe_xO₃ has remarkable dielectric, electrochemical, ferroelectric and photo-catalytic properties and have potential applications in microwave, electrical, electronic, energy storage devices. It is also an active photo-catalyst material for the removal/oxidation of toxic pollutants from the environment.

P Doping Promotes the Spontaneous Visible-Light-Driven Photocatalytic Water Splitting in Isomorphic Type II GaSe/InS Heterostructure

The development and design of clean and efficient water splitting photocatalysts is important for the current situation of energy shortage and environmental pollution. A new type of isomorphic GaSe/InS heterostructure is constructed, and the optoelectronic properties were studied through first-principles calculations. The results show that GaSe/InS vdW heterostructure is a type II semiconductor with a band gap of 2.09 eV. However, through the analysis of the energy band edge position and Gibbs free energy change of water splitting, it is found that the GaSe/InS heterostructure is difficult to undergo overall water splitting. Therefore, nonmetallic element P doping is considered, the established P-doped GaSe/InS (P-GaSe/InS) heterostructure could maintain the type II band arrangement, and under acidic conditions, P-GaSe/InS heterostructure could spontaneously undergo overall water splitting thermodynamically. Furthermore, the low exciton binding energy of P-GaSe/InS heterostructure highlights better light absorption performance. Therefore, these findings indicate that P-GaSe/InS heterostructure is a promising photocatalyst in overall water splitting.

Molybdenum impregnated g-C3N4 nanotubes as potentially active photocatalyst for renewable energy applications

Molybdenum (Mo) impregnated g-C3N4 (Mo-CN) nanotubes are fabricated via a thermal/hydrothermal process to augment photoelectrochemical properties during solar-driven water-splitting (SDWS) reactions. Graphitic-C3N4 is an attractive material for photocatalysis because of its suitable band energy, high thermal and chemical stability. The FE-SEM and HR-TEM comprehend the nanotube-like morphology of Mo-CN. The spectroscopic characterization revealed bandgap energy of 2.63 eV with high visible-light activity. The x-ray diffraction of pristine g-C3N4 and Mo-CN nanotubes discloses the formation of triazine-based nanocrystalline g-C3N4, which remains stable during hydrothermal impregnation of Mo. Furthermore, Mo-CN nanotubes possess high sp2-hybridized nitrogen content, and metallic/oxidized Mo nanoparticles (in a ratio of 1:2) are impregnated into g-C3N4. The XPS analysis confirms C, N, and Mo for known atomic and oxidation states in Mo-CN. Furthermore, high photocurrent efficiency (~ 5.5 mA/cm2) is observed from 5%-Mo-CN nanotubes. That displays efficient SDWS by 5%-Mo-CN nanotubes than other counterparts. Impedance spectroscopy illustrated the lowest charge transfer resistance (Rct) of 5%-Mo-CN nanotubes, which further confirms the fast electron transfer kinetics and efficient charge separation resulting in high photocurrent generation. Hence, 5%Mo-CN composite nanotubes can serve as a potential photocatalytic material for viable solar-driven water splitting.

Fabrication of visible-light response cadmium sulfide modified superhydrophobic surface for water resource remediation

Widespread concern has been attached to the frequent occurrence of pollution by oil slicks and water-soluble pollutants in recent years. The semiconductor photocatalysis is applied to sewage treatment owing to the advantages of energy-conserving and environmental protection. However, its application is limited by the defects of not solving oil slicks and the hard recyclability. In this paper, the high specific surface area and rod-shaped CdS were prepared using template and alkali-treated methods. Next, the alkylated SiO₂and alkali-treated CdS were deposited on pure fabric by physical deposition to prepare the multifunctional superhydrophobic fabric. The specific surface area and morphology of alkali-treated CdS were tested by BET specific surface area test and field emission scanning electron microscope. Besides, oil/water separation, water contact angle, and stability test experiments were performed to determine the superhydrophobic performance. Photocatalysis degradation efficiency and cycle degradation stability of multifunctional fabric were characterized by photocatalysis degradation Rh B experiment. Consequently, the alkali-treated CdS displays a high specific surface up to 343 m²g^-1. The multifunctional fabric presents excellent superhydrophobic performance with the water contact angle up to 155°. Meanwhile, the water contact angle of multifunctional fabric is always over 150° under various circumstances (acid-base corrosion, soaking time at 100 °C and frictional numbers), indicating that the multifunctional fabric has excellent superhydrophobic stability. Moreover, the fabric also exhibits outstanding photocatalysis performance (the degradation efficiency is 94% after 3 cycles). Our work provides a feasible method for addressing oil slicks on water surface and degrading water-soluble pollutants with extensive application prospects in water resource remediation.

Synthesis of Ni modified Au@CdS core-shell nanostructures for enhancing photocatalytic coproduction of hydrogen and benzaldehyde under visible light

The development of visible light responsive photocatalysts for simultaneous production of hydrogen (H₂) fuel and value-added chemicals is greatly promising to solve the energy and environmental issues by improving the utilization efficiency of solar energy. Herein, the three-component Ni/(Au@CdS) core-shell nanostructures were constructed by the hydrothermal synthesis followed with photodeposition. The intimate integration of plasmonic Au nanospheres and visible-light responsive CdS shells modified with Ni cocatalyst facilitated the generation and separation of electron-hole pairs as well as reduced the overpotential of hydrogen evolution. The Ni/(Au@CdS) photocatalyst exhibited excellent performance toward the selective transformation of benzyl alcohol under anaerobic conditions, and the yields of H₂ and benzaldehyde reached up to 3882 and 4242 μmol·g^-1·h^-1, respectively. The apparent quantum efficiency (AQE) was determined to be 4.09% under the irradiation of 420 nm. The systematic studies have verified the synergy of plasmonic effect and metal cocatalyst on enhancing the photocatalysis. This work highlights the desirable design and potential application of plasmonic photocatalysts for solar-driven coproduction of H₂ fuel and high-value chemicals.

Highly-efficient visible-light-driven photocatalytic H2 evolution integrated with microplastic degradation over MXene/ZnxCd1-xS photocatalyst

The development of highly-efficient photocatalyst for H₂ production integrated with microplastic degradation is significant to meet the demand for clean energy and resolve "white pollution". Herein, a series of MXene/Zn_xCd_1-xS photocatalysts were successfully fabricated for H₂ evolution integrated with degradation of polyethylene terephthalate (PET). The resultant photocatalysts exhibited excellent photocatalytic performance, and the best photocatalytic H₂ evolution rate can reach 14.17 mmol·g^-1·h^-1 in alkaline PET alkaline solution. What's more, the PET was also converted to the useful organic micromolecule, including glycolate, acetate, ethanol, etc. The highly-efficient photocatalytic performance of MXene/Zn_xCd_1-xS photocatalysts can be attributed to the enhanced separation ability of photocarriers and optimum band structure with enhanced oxidation capacity of valence band. Finally, the photocatalytic mechanism was investigated in detail. Overall, this work supplied a new useful guidance for solving the energy problem and microplastic pollution issues, simultaneously.

Enhanced photoelectrocatalytic performance of α-MnO2 by Sb and N charge compensation

The donor Sb and acceptor N can promote the separation of electron–hole pairs excited by photoirradiation.

Chalcogenides as photocatalysts

Chalcogenides and chalcogenide-based heterostructures as photocatalysts.