Water-assisted preparation of ethanol-dispersed CsPbBr3 perovskite nanocrystals and emissive gel

Green-route manufacturing towards future industrialization of metal halide perovskite nanocrystals

Perovskite nanocrystals (PeNCs) with excellent optical properties have attracted tremendous research interests and have been considered as promising candidates for new-generation optoelectronic devices. Over the past few years, numerous efforts have been made to overcome the challenges in terms of sustainable manufacturing of PeNCs and related devices and systems, including the solvents used in precursor preparation, antisolvents and perovskite materials for the fabrication of devices and systems, and remarkable progress has been made. However, the usage of toxic, organic solvents in the synthesis of PeNCs poses a threat to the ecosystem and human health, which has hindered the progress in the commercialization and industrialization of PeNCs. This has promoted the development of green solvents for the sustainable manufacturing of PeNCs. In this Feature Article, a state-of-the-art green method for the synthesis of PeNCs is presented, in which the solvents of low toxicities are underlined in contrast to the reported Reviews which focus on toxic solvents for the preparation of precursor solutions. We then focus on green, aqueous methods for the preparation of PeNCs, including conventional perovskite and double PeNCs, by summarizing our previous research efforts and studies. In particular, pure water as the greenest solvent is introduced for the preparation of PeNCs, and the parameters affecting the size and optical characteristics of PeNCs, such as sonication time and ligands for post-treatment, are discussed. The strategies of using a passivation layer to improve the aqueous stability of PeNCs are reviewed, which are grouped into organic polymers and inorganic semiconductors. We highlight the challenges and possible solutions in the green manufacturing and applications of PeNCs. The green routes discussed in this article for the synthesis of PeNCs are expected to be a major step forward for the commercialization and industrialization of the fabrication of PeNCs. It is anticipated that green manufacturing will continue to be the mainstream in the synthesis and fabrication of PeNCs.

Photocatalytic CO2 Reduction Coupled with Oxidation of Benzyl Alcohol over CsPbBr3@PANI Nanocomposites

Herein, we successfully prepare conductive polyaniline (PANI)-encapsulated CsPbBr3 perovskite nanocrystals (PNCs) that demonstrate much improved photocatalytic performance and stability toward the CO2 reduction reaction (CRR) coupled with oxidation of benzyl alcohol (BA) to benzaldehyde. Due to the acid-base interaction between CO2 and PANI, CO2 molecules are selectively adsorbed on PANI in the form of carbamate. As a result, the rate of production of CO (rCO) reaches 26.1 μmol g-1 h-1 with a selectivity of 98.1%, which is in good agreement with the rate of oxidation (∼27.0 μmol g-1 h-1) of BA. Such a high reduction/oxidation rate is enabled by the fast electron transfer (∼2.2 ps) from PNCs to PANI, as revealed by femtosecond transient absorption spectroscopy. Moreover, because of the benefit of the encapsulation of PANI, no significant decrease in rCO is observed in a 10 h CRR test. This work offers insight into how to simultaneously achieve improved photocatalytic performance and stability of CsPbX3 PNCs.

Design, characterization and applications of nanocolloidal hydrogels

Nanocolloidal gels (NCGs) are an emerging class of soft matter, in which nanoparticles act as building blocks of the colloidal network. Chemical or physical crosslinking enables NCG synthesis and assembly from a broad range of nanoparticles, polymers, and low-molecular weight molecules. The synergistic properties of NCGs are governed by nanoparticle composition, dimensions and shape, the mechanism of nanoparticle bonding, and the NCG architecture, as well as the nature of molecular crosslinkers. Nanocolloidal gels find applications in soft robotics, bioengineering, optically active coatings and sensors, optoelectronic devices, and absorbents. This review summarizes currently scattered aspects of NCG formation, properties, characterization, and applications. We describe the diversity of NCG building blocks, discuss the mechanisms of NCG formation, review characterization techniques, outline NCG fabrication and processing methods, and highlight most common NCG applications. The review is concluded with the discussion of perspectives in the design and development of NCGs.

Highly Stable and Photoluminescent CsPbBr3/Cs4PbBr6 Composites for White-Light-Emitting Diodes and Visible Light Communication

Inorganic lead halide perovskite is one of the most excellent fluorescent materials, and it plays an essential role in high-definition display and visible light communication (VLC). Its photochromic properties and stability determine the final performance of light-emitting devices. However, efficiently synthesizing perovskite with high quality and stability remains a significant challenge. Here, we develop a facile and environmentally friendly method for preparing high-stability and strong-emission CsPbBr₃/Cs₄PbBr₆ composites using ultrasonication and liquid paraffin. Tuning the contents of liquid paraffin, bright-emission CsPbBr₃/Cs₄PbBr₆ composite powders with a maximum PLQY of 74% were achieved. Thanks to the protection of the Cs₄PbBr₆ matrix and liquid paraffin, the photostability, thermostability, and polar solvent stability of CsPbBr₃/Cs₄PbBr₆-LP are significantly improved compared to CsPbBr₃ quantum dots and CsPbBr₃/Cs₄PbBr₆ composites that were prepared without liquid paraffin. Moreover, the fabricated CsPbBr₃/Cs₄PbBr₆-LP-based WLEDs show excellent luminescent performance with a power efficiency of 129.5 lm/W and a wide color gamut, with 121% of the NTSC and 94% of the Rec. 2020, demonstrating a promising candidate for displays. In addition, the CsPbBr₃/Cs₄PbBr₆-LP-based WLEDs were also demonstrated in a VLC system. The results suggested the great potential of these high-performance WLEDs as an excitation light source to achieve VLC.

Weakening Ligand-Liquid Affinity to Suppress the Desorption of Surface-Passivated Ligands from Perovskite Nanocrystals

The interfacial migration of surface-bound ligands highly affects the colloidal stability and optical quality of semiconductor nanocrystals, of which the underlying mechanism is not fully understood. Herein, colloidal CsPbBr₃ perovskite nanocrystals (PNCs) with fragile dynamic equilibrium of ligands are taken as the examples to reveal the important role of balancing ligand-solid/solvent affinity in suppressing the desorption of ligands. As a micellar surfactant, glycyrrhizic acid (GA) with bulky hydrophobic and hydrophilic groups exhibits a relatively smaller diffusion coefficient (∼440 μm²/s in methanol) and weaker ligand-liquid affinity than that of conventional alkyl amine and carboxy ligands. Consequently, hydrophilic GA-passivated PNCs (PNCs-GA) show excellent colloidal stability in various polar solvents with dielectric constant ranging from 2.2 to 32.6 and efficient photoluminescence with a quantum yield of 85.3%. Due to the suppressed desorption of GA, the morphological and optical properties of PNCs-GA are well maintained after five rounds purification and two months long-term storage. At last, hydrophilic PNCs-GA are successfully patterned through inkjet- and screen-printing technology. These findings offer deep insights into the interfacial chemistry of colloidal NCs and provide a universal strategy for preparing high-quality hydrophilic PNCs.

Highly emissive green CsPbBr3/Cs4PbBr6 composites: formation kinetics, excellent heat, light, and polar solvent resistance, and flexible light-emitting application

Benefit from their near-unity photoluminescence quantum yield (PL QY), narrow emission band, and widely tunable bandgap, metal halide perovskites have shown promising in light-emitting applications. Despite such promise, how to facile, environmentally-friendly, and large-scale prepare solid metal halide perovskite with high emission and stability remains a challenging. Herein, we demonstrate a convenient and environmentally-friendly method for the mass synthesis of solid CsPbBr₃/Cs₄PbBr₆ composites using high-power ultrasonication. Adjusting key experimental parameters, bright emitting CsPbBr₃/Cs₄PbBr₆ solids with a maximum PL QY of 71% were obtained within 30 min. XRD, SEM, TEM, Abs/PL, XPS, and lifetime characterizations provide solid evidence for forming CsPbBr₃/Cs₄PbBr₆ composites. Taking advantage of these composites, the photostability, thermostability, and polar solvent stability of CsPbBr₃/Cs₄PbBr₆ are much improved compared to CsPbBr₃. We further demonstrated CsPbBr₃/Cs₄PbBr₆ use in flexible/stretchable film and high-power WLEDs. After being subjected to bending, folding, and twisting, the film retains its bright emission and exhibits good resistance to mechanical deformation. Additionally, our WLEDs display a superior, durable high-power-driving capability, operating currents up to 300 mA and maintaining high luminous intensity for 50 hours. Such highly emissive and stable metal halide perovskites make them promising for solid-state lighting, lasing, and flexible/stretchable display device applications.

Modified Fabrication of Perovskite-Based Composites and Its Exploration in Printable Humidity Sensors

Organic perovskites are promising optoelectronic semiconductor materials with photoelectric applications. It is known that the luminescence of perovskites is highly sensitive to hydron molecules due to its low moisture resistance of crystal structure, indicating its potential application on humidity-sensing. Herein, a novel perovskite-based compound (PBC) with minimal defects was developed to promote the photoluminescence performance via optimization of the drying method and precursor constitutions. Perovskite materials with good structural integrity and enhanced fluorescence performance up to four times were obtained from supercritical drying. Moreover, the hydrophilic polymer matrix, polyethylene oxide (PEO), was added to obtain a composite of perovskite/PEO (PPC), introducing enhanced humidity sensitivity and solution processibility. These perovskite/PEO composites also exhibited long-term stability and manifold cycles of sensitivity to humidity owing to perovskite encapsulation by PEO. In addition, this precursor solution of perovskite-based composites could be fancily processed by multiple methods, including printing and handwriting, which demonstrates the potential and broaden the applications in architecture decoration, logos, trademarks, and double encryption of anti-fake combined with humidity.