Conjugated microporous polyarylimides immobilization on carbon nanotubes with improved utilization of carbonyls as cathode materials for lithium/sodium-ion batteries

Regulating the Porosity and Bipolarity of Polyimide-Based Covalent Organic Framework for Advanced Aqueous Dual-Ion Symmetric Batteries

The all-organic aqueous dual-ion batteries (ADIBs) have attracted increasing attention due to the low cost and high safety. However, the solubility and unstable activity of organic electrodes restrict the synergistic storage of anions and cations in the symmetric ADIBs. Herein, a novel polyimide-based covalent organic framework (labeled as NTPI-COF) is constructed, featured with the boosted structure stability and electronic conductivity. Through regulating the porosity and bipolarity integrally, the NTPI-COF possesses hierarchical porous structure (mesopore and micropore) and abundant bipolar active centers (C═O and C─N), which exhibits rapid dual-ion transport and storage effects. As a result, the NTPI-COF as the electrodes for ADIBs deliver a high reversible capacity of 109.7 mA h g-1 for Na+ storage and that of 74.8 mA h g-1 for Cl- storage at 1 A g-1, respectively, and with a capacity retention of 93.2% over 10 000 cycles at 10 A g-1. Additionally, the all-organic ADIBs with symmetric NTPI-COF electrodes achieve an impressive energy density of up to 148 W h kg-1 and a high power density of 2600 W kg-1. Coupling the bipolarity and porosity of the all-organic electrodes applied in ADIBs will further advance the development of low-cost and large-scale energy storage.

Extending the π-Conjugation of a Donor-Acceptor Covalent Organic Framework for High-Rate and High-Capacity Lithium-Ion Batteries

Realizing high-rate and high-capacity features of Lihium-organic batteries is essential for their practical use but remains a big challenge, which is due to the instrinsic poor conductivity, limited redox kinetics and low utility of organic electrode mateials. This work presents a well-designed donor-acceptor Covalent Organic Framework (COFs) with extended conjugation, mesoscale porosity, and dual redox-active centers to promote fast charge transfer and multi-electron processes. As anticipated, the prepared cathode with benzo [1,2-b:3,4-b':5,6-b''] trithiophene (BTT) as p-type and pyrene-4,5,9,10-tetraone (PTO) as n-type material (BTT-PTO-COF) delivers impressive specific capacity (218 mAh g-1 at 0.2 A g-1 in ether-based electrolyte and 275 mAh g-1 at 0.2 A g-1 in carbonate-based electrolyte) and outstanding rate capability (79 mAh g-1 at 50 A g-1 in ether-based electrolyte and 124 mAh g-1 at 10 A g-1 in carbonate-based electrolyte). In addition, the potential of BTT-PTO-COF electrode for prototype batteries has been demonstrated by full cells of dual-ion (FDIBs), which attain comparable electrochemical performances to the half cells. Moreover, mechanism studies combining ex situ characterization and theoratical calculations reveal the efficient dual-ion storage process and facile charge transfer of BTT-PTO-COF. This work not only expands the diversity of redox-active COFs but also provide concept of structure design for high-rate and high-capacity organic electrodes.

Porous Organic Polymers as Active Electrode Materials for Energy Storage Applications

Eco-friendly and efficient energy production and storage technologies are highly demanded to address the environmental and energy crises. Porous organic polymers (POPs) are a class of lightweight porous network materials covalently linked by organic building blocks, possessing high surface areas, tunable pores, and designable components and structures. Due to their unique structural and compositional advantages, POPs have recently emerged as promising electrode materials for energy storage devices, particularly in the realm of supercapacitors and ion batteries. In this work, a comprehensive overview of recent progress and applications of POPs as electrode materials in energy storage devices, including the structural features and synthesis strategies of various POPs, as well as their applications in supercapacitors, lithium batteries, sodium batteries, and potassium batteries are provided. Finally, insights are provided into the future research directions of POPs in electrochemical energy storage technologies. It is anticipated that this work can provide readers with a comprehensive background on the design of POPs-based electrode materials and ignite more research in the development of next-generation energy storage devices.

Electrochemical coupling in subnanometer pores/channels for rechargeable batteries

Subnanometer pores/channels (SNPCs) play crucial roles in regulating electrochemical redox reactions for rechargeable batteries. The delicately designed and tailored porous structure of SNPCs not only provides ample space for ion storage but also facilitates efficient ion diffusion within the electrodes in batteries, which can greatly improve the electrochemical performance. However, due to current technological limitations, it is challenging to synthesize and control the quality, storage, and transport of nanopores at the subnanometer scale, as well as to understand the relationship between SNPCs and performances. In this review, we systematically classify and summarize materials with SNPCs from a structural perspective, dividing them into one-dimensional (1D) SNPCs, two-dimensional (2D) SNPCs, and three-dimensional (3D) SNPCs. We also unveil the unique physicochemical properties of SNPCs and analyse electrochemical couplings in SNPCs for rechargeable batteries, including cathodes, anodes, electrolytes, and functional materials. Finally, we discuss the challenges that SNPCs may face in electrochemical reactions in batteries and propose future research directions.

Boosting lithium storage in covalent triazine framework for symmetric all-organic lithium-ion batteries by regulating the degree of spatial distortion

Covalent triazine frameworks (CTFs) with tunable structure, fine molecular design and low cost have been regarded as a class of ideal electrode materials for lithium-ion batteries (LIBs). However, the tightly layered structure possessed by the CTFs leads to partial hiding of the redox active site, resulting in their unsatisfactory electrochemical performance. Herein, two CTFs (BDMI-CTF and TCNQ-CTF) with higher degree of structural distortion, more active sites exposed, and large lattice pores were prepared by dynamic trimerization reaction of cyano. As a result, BDMI-CTF as a cathode material for LIBs exhibits high initial capacity of 186.5 mAh/g at 50 mA g-1 and superior cycling stability without capacity loss after 2000 cycles at 1000 mA g-1 compared with TCNQ-CTF counterparts. Furthermore, based on their bipolar functionality, BDMI-CTF can be used as both cathode and anode materials for symmetric all-organic batteries (SAOBs), and this work will open a new window for the rational design of high performance CTF-based LIBs.

Stable organic polymer anode for high rate and fast charge sodium based dual-ion battery

Considering the extensive resources, flexible structural designability, and abundant active sites, organic electrodes have been considered as the ideal sodium storage materials. However, organic materials generally face the limitations of unstable and dissolved characteristic, leading to a poor cyclic stability. In this work, we proposed a carbon nanotube (CNT) modified polyimide as the anode for sodium-based dual-ion battery (SDIB). The polyimide remains well the structure and morphology of monomer with a stable conjugated structure and high degree of crystallinity, effectively enhancing the electrochemical performance of the SDIBs. Also, the cooperation with CNT particularly improves the ion conductivity of the anode and advances the rate performance. Combined with an ionic liquid electrolyte, the constructed dual-ion battery exhibits excellent rate capability, high specific discharge capacity and stable cycling performance. It delivers a specific discharge capacity of 119.3 mA h g-1 at 0.2 C (1 C=100 mA g-1 ) and still has a specific discharge capacity of 82.3 mA h g-1 even after 1000 cycles at 10 C. Besides, the system displays a low self-discharge rate and stable fast charging performance, which is expected to be applied in the large-scale electrochemical energy storage devices and inspire the future development of SDIBs.

Stable quasi-solid-state lithium-organic battery based on composite gel polymer electrolyte and compatible organic cathode material

High-performance organic small-molecule electrode materials are troubled with their high solubility in liquid electrolytes. The construction of quasi-solid-state lithium organic batteries (LOBs) using gel polymer electrolytes with high mechanical properties, compromised ionic conductivity, high safety, and eco-friendly is an effective way to inhibit the dissolution of active materials. Herein, two hexaazatriphenylene (HATN)-based organic cathode materials (HATNA-6OCH3 and HATNA-6OH) are synthesized and then matched with polyvinylidene fluoride-hexafluoropropylene (PVDF-HFP)-based gel polymer electrolytes to construct quasi-solid-state LOBs. Thanks to the enhanced interfacial compatibility between organic cathode material and gel polymer electrolyte, HATNA-6OH with compatible hydroxyl group shows the enhanced electrochemical properties compared with HATNA-6OCH3. Further, the electrochemical performance is improved when HATNA-6OH is combined with a gel polymer electrolyte modified with a succinonitrile (SN) plasticizer (GPE-0.4SN), including a high specific capacity of 153.3 mAh g-1 at 50 mA g-1 and a good reversible capacity of 88 mAh g-1 after 100 cycles at 200 mA g-1. In addition, the good electrochemical properties and lithium-ion storage mechanism of HATNA-6OH have been elucidated using density functional theory (DFT) and spectral characterizations.

Stable Hexaazatrinaphthalene-Based Planar Polymer Cathode Material for Organic Lithium-Ion Batteries

Organic materials have garnered intensive focus as a new group of electrodes for lithium-ion batteries (LIBs). However, many reported organic electrodes so far still exhibit unsatisfying cycling stability because of the dissolution in the electrolytes. Herein, a novel azo-linked hexaazatrianphthalene (HATN)-based polymer (AZO-HATN-AQ) is designed and fabricated by the polymerization of trinitrodiquinoxalino[2,3-a:2',3'-c]phenazine (HATNTN) and 2,6-diaminoanthraquinone (DAAQ). The abundant redox-active sites, extended π-conjugated planar conformation, and low energy gap endow the AZO-HATN-AQ electrode with high theoretical capacity, excellent solubility resistance, and fast Li-ion transport. In particular, the fully lithiated AZO-HATN-AQ still keeps the planar structure, contributing to the excellent cycling stability. As a result, AZO-HATN-AQ cathodes show high specific capacity (240 mAh g-1 at 0.05 A g-1), prominent rate capability (98 mAh g-1 at 8 A g-1), and outstanding cycling stability (120 mAh g-1 after 2000 cycles at 4 A g-1 with 85.7% capacity retention) simultaneously. This study demonstrates that rational structure design of the polymer electrodes is an effective approach to achieving excellent comprehensive electrochemical performance.

Three-dimensional polyimide nanofiber framework reinforced polymer electrolyte for all-solid-state lithium metal battery

The replacement of traditional liquid electrolytes with polyethylene oxide (PEO) based composite polymer electrolytes (CPEs) is an important strategy to address the current flammability and explosiveness of lithium batteries since PEO CPEs have high flexibility, excellent processability and moderate cost. However, the insufficient ionic conductivity and inferior mechanical strength of PEO CPEs do not suit the operating requirements of all-solid-state lithium metal batteries at room temperature. Herein, three-dimensional (3D) framework composed of interweaved high-modulus polyimide (PI) nanofibers along with functional succinonitrile (SN) plasticizers are employed to synergistically reinforce the ionic conductivity and mechanical strength of PEO CPEs. Impressively, benefitting from the synergistic effects of 3D PI framework and SN plasticizer, PI-PEO-SN CPEs exhibits high ionic conductivity of 1.03 × 10^-4 S cm^-1 at 30 °C, remarkable tensile strength of 4.52 MPa, and superior Li dendrites blocking ability (>400 h at 0.1 mA cm^-2). Such favorable features of PI-PEO-SN CPEs endow LiFePO₄/PI-PEO-SN/Li solid-state prototype cells with high specific capacity (151.2 mA h g^-1 at 0.2 C), long cycling lifespan (>150 cycles with 91.7 % capacity retention), and superior operating safety even under bending, folding and cutting harsh conditions. This work will pave the avenues to design and fabricate new high-performance PEO CPEs for the high energy density and safety all-solid-state batteries.

π-Conjugated Hexaazatrinaphthylene-Based Azo Polymer Cathode Material Synthesized by a Reductive Homocoupling Reaction for Organic Lithium-Ion Batteries

A novel hexaazatrinaphthylene-based (HATN) azo polymer (PAH) was synthesized from a newly designed tri-nitro compound trinitrodiquinoxalino[2,3-a:2',3'-c]phenazine (HATNTN) through a Zn-induced reductive homocoupling reaction and used as a cathode material for lithium-ion batteries (LIBs). The integration of redox-active HATN units and azo linkages can improve the specific capacity, rate performance, and cycling stability of the PAH cathode. The control LIBs were assembled from HATNTN, in which HATNTN can be electrochemically reduced to an HATN-based azo polymer. Compared with the HATNTN cathode, the PAH cathode delivers higher specific capacities with much-improved cycling stability (97 mA h g^-1 capacity retention after 1500 cycles at 500 mA g^-1, which is around 28 times that of the HATNTN cathode) and considerably better rate performance (118 mA h g^-1 at 2000 mA g^-1, which is around 90 times that of the HATNTN cathode), simultaneously. This work provides a chemical polymerization strategy to construct extended π-conjugated azo polymers with multiple redox centers from nitro compounds for developing high-performance LIBs.

Triazine-based two dimensional porous materials for visible light-mediated oxidation of sulfides to sulfoxides with O2

Recently, triazine-based two dimensional (2D) porous materials have received increasing attention in photocatalysis. Herein, CTF-1, a covalent triazine framework, was adopted as the blueprint for designing a 2D bespoke photocatalyst. The thiazolo[5,4-d]thiazole (TzTz) linkage was inserted into the framework of CTF-1, affording TzTz-TA, which belongs to conjugated microporous polymers (CMPs). Rather than the direct insertion via the challenging CH activation, TzTz-TA was assembled from 2,4,6-tris(4-formylphenyl)-1,3,5-triazine and dithiooxamide, in which TzTz was formed in situ by a process of catalyst-free solvothermal condensation. Both CTF-1 and TzTz-TA had similar energy gaps (E_g), photocurrents, and charge carrier lifetimes, in line with the similar molecular underpinnings. However, the reduction potential of TzTz-TA is less negative than that of CTF-1 due to the insertion of TzTz linkage, in a more appropriate position for activating O₂ to superoxide (O₂^•-). In return, blue light-mediated oxidation of sulfides to sulfoxides with O₂ over TzTz-TA was accomplished with significantly superior conversions to those over CTF-1. Intriguingly, extensive sulfides could be oxidized to corresponding sulfoxides with outstanding recycling stability of TzTz-TA. Notably, attendance of an induction period was observed during TzTz-TA photocatalysis. This work highlights the vast potential of designing triazine-based porous materials to meet the tailor-made demands, such as the oxidative transformation of organic molecules with O₂.

Turning commercial MnO2 (≥85 wt%) into high-crystallized K+-doped LiMn2O4 cathode with superior structural stability by a low-temperature molten salt method

The obtainment of low-cost, easily prepared and high-powered LiMn₂O₄ is the key to achieve its wide application in various electronic devices. In this work, a mild and easily scaled molten salt method (KCl@LiCl) is utilized to convert commercial MnO₂ to the high-performance LiMn₂O₄. At the same reaction temperature, the molten salt method leads to the formation of K⁺-doped LiMn₂O₄ with higher crystallinity compared to the conventional solid state method, which contributes to the improved inner charge transfer. The Li₃PO₄ protective layer is coated on the surface of K⁺-doped LiMn₂O₄ to elevate the interfacial stability and the Li⁺ transfer on interface. Thus, the optimized electrode shows a higher specific discharge capacity (103/60 mAh g^-1 at 0.02/2 A g^-1) and a longer cyclic life (80 mAh g^-1 after 500 cycles at 0.5 A g^-1) compared to those of LiMn₂O₄ by solid state method (49/2 mAh g^-1 at 0.02/2 A g^-1 and 20 mAh g^-1 after 500 cycles at 0.5 A g^-1).