Electrochemically-active carbon nanotube coatings for biofouling mitigation: Cleaning kinetics and energy consumption for cathodic and anodic regimes

Artificial-intelligence-model to optimize biocide dosing in seawater-cooled industrial process applications considering environmental, technical, energetic, and economic aspects

This research introduces an Artificial Intelligence (AI) based model designed to concurrently optimize energy supply management, biocide dosing, and maintenance scheduling for heat exchangers. This optimization considers energetic, technical, economic, and environmental considerations. The impact of biofilm on heat exchangers is assessed, revealing a 41% reduction in thermal efficiency and a 113% increase in flow frictional resistance of the fluid compared to the initial state. Consequently, the pump's power consumption, required to maintain hydraulic conditions, rises by 9%. The newly developed AI model detects the point at which the heat exchanger's performance begins to decline due to accumulating dirt, marking day 44 of experimentation as the threshold to commence the antifouling biocide dosing. Leveraging this AI model to monitor heat exchanger efficiency represents an innovative approach to optimizing antifouling biocide dosing and reduce the environmental impact stemming from industrial plants.

Treating reverse osmosis concentrate to address scaling and fouling problems in zero-liquid discharge systems: A scientometric review of global trends

Currently, reverse osmosis concentrate (ROC) treatment is one of the most promising techniques for its disposal because it produces freshwater with high recovery and valuable materials such as salts and reduces waste volume and environmental pollution. Public attention to the severe consequences of water pollution and strict environmental regulations on wastewater discharge has pushed water-polluting industries toward zero-liquid discharge (ZLD). However, scaling and fouling problems increase energy consumption and limit permeate flux at high salt concentrations, mainly due to calcium, magnesium, and silica precipitation, ultimately decreasing ZLD performance. Therefore, this study discusses drivers and ROC pretreatment technologies to improve ZLD efficiency and presents a scientometric review of global trends. The advantages, disadvantages, and economic and environmental aspects of conventional and emerging pre-treatment technologies were studied. Traditional treatment of chemical processes combined with precipitation removes a large amount of scaling ions; however, high operation and maintenance costs and limited full-scale plant experience are the main drawbacks. Softening and coagulation are most commonly applied to treat large volumes at a moderate cost; however, substantial sludge production and increased conductivity are major operational issues. Moreover, emerging technologies efficiently remove scale-forming ions with high capital and operating costs. New variations in standard reverse osmosis technologies have improved ZLD efficiency; nonetheless, scaling and fouling are of concern. Therefore, this review presents the studies on ROC pre-treatment technologies for removing scaling ions to enhance ZLD efficiency, which can help in future research.

Three-dimensional biofilm electrode reactors (3D-BERs) for wastewater treatment

Three-dimensional biofilm electrode reactors (3D-BERs) are highly efficient in refractory wastewater treatment. In comparison to conventional bio-electrochemical systems, the filled particle electrodes act as both electrodes and microbial carriers in 3D-BERs. This article reviews the conception and basic mechanisms of 3D-BERs, as well as their current development. The advantages of 3D-BERs are illustrated with an emphasis on the synergy of electricity and microorganisms. Electrode materials utilized in 3D-BERs are systematically summarized, especially the critical particle electrodes. The configurations of 3D-BERs and their integration with wastewater treatment reactors are introduced. Operational parameters and the adaptation of 3D-BERs to varieties of wastewater are discussed. The prospects and challenges of 3D-BERs for wastewater treatment are then presented, and the future research directions are proposed. We believe that this timely review will help to attract more attentions on 3D-BERs investigation, thus promoting the potential application of 3D-BERs in wastewater treatment.

The Pathway towards Photoelectrocatalytic Water Disinfection: Review and Prospects of a Powerful Sustainable Tool

Photoelectrocatalysis is a hybrid photon/electron-driven process that benefits from the synergistic effects of both processes to enhance and stabilize the generation of disinfecting oxidants. Photoelectrocatalysis is an easy to operate technology that can be scaled-up or scaled-down for various water treatment applications as low-cost decentralized systems. This review article describes the fundamentals of photoelectrocatalysis, applied to water disinfection to ensure access to clean water for all as a sustainable development goal. Advances in reactor engineering design that integrate light-delivery and electrochemical system requirements are presented, with a description of photo-electrode material advances, including doping, nano-decoration, and nanostructure control. Disinfection and cell inactivation are described using different model microorganisms such as E. coli, Mycobacteria, Legionella, etc., as well the fungus Candida parapsilosis, with relevant figures of merit. The key advances in the elucidation of bacterial inactivation mechanisms by photoelectrocatalytic treatments are presented and knowledge gaps identified. Finally, prospects and further research needs are outlined, to define the pathway towards the future of photoelectrocatalytic disinfection technologies.