Tannic Acid: A green and efficient stabilizer of Au, Ag, Cu and Pd nanoparticles for the 4-Nitrophenol Reduction, Suzuki-Miyaura coupling reactions and click reactions in aqueous solution

Tannic Acid-Decorated Bimetallic Copper-Gold Nanoparticles with High Catalytic Activity for the Degradation of 4-Nitrophenol and Rhodamine B

In this study, tannic acid (TA) was applied as a stabilizing agent for synthesizing bimetallic copper-gold (CuAu) nanoparticles. Cu(NO3)2 and NaAuCl4 were used as the sources of copper and gold ions, respectively, and NaBH4 was employed as a reducing agent. The prepared TA-CuAu nanoparticles were extensively characterized via ultraviolet-visible spectroscopy, Fourier transform infrared spectroscopy, transmission electron microscopy, X-ray diffraction, and zeta potential analyses. To evaluate their catalytic activity, the TA-CuAu nanoparticles and NaBH4 were applied in the degradation of 4-nitrophenol (4-NP) and rhodamine B (RB) individually and in a mixture. The individual degradation of 4-NP and RB was completed within 10 min, and the apparent rate constants were calculated as 0.3046 and 0.2628 min-1, respectively, emphasizing the efficient catalytic activity of the TA-CuAu nanoparticles. Additionally, controlled experiments were performed for the degradation of 4-NP and RB in the absence of catalysts or NaBH4 to investigate the kinetic feasibility of the catalytic reactions. A mixture of 4-NP and RB was successfully degraded within 10 min using the TA-CuAu nanoparticles as catalysts. Furthermore, the reuse of the catalysts after five successive cycles demonstrates an outstanding performance with no significant loss in the catalytic activity. Finally, the successful treatment of the tap and lake water samples spiked with 4-NP and RB using the TA-CuAu nanoparticles further confirmed their application potential as catalysts in environmental water remediation.

Enhanced Stability, Superior Anti-Corrosive, and Tribological Performance of Al2O3 Water-based Nanofluid Lubricants with Tannic Acid and Carboxymethyl Cellulose over SDBS as Surfactant

In this research work, the stability, tribological, and corrosion properties of a water-based Al2O3 nanofluid (0.5 wt%) formulated with tannin acid (TA) and carboxymethyl cellulose (CMC) as dispersants or surfactants were investigated. For comparative purposes, sodium dodecylbenzene sulfonate (SDBS) was also incorporated. The stability of the nanofluid was assessed through zeta potential measurements and photo-capturing, revealing the effectiveness of TA and CMC in preventing nanoparticle agglomeration. Tribological properties were examined using a pin-on-disk apparatus, highlighting the tribofilm of Al2O3 that enhanced lubricating properties of the nanofluid by the SEM, resulting in reduced friction and wear of the contacting surfaces. Sample with the addition of both TA and CMC exhibited the best tribological performance, with a ~ 20% reduction in the friction coefficient and a 59% improvement in wear rate compared to neat nanofluid without TA and CMC. Additionally, the corrosion resistance of the nanofluids were evaluated via weight loss and electrochemical impedance spectroscopy. The nanofluid sample containing both TA and CMC exhibited the lowest corrosion rate, with 97.6% improvement compared to sample without them. This study provides valuable insights into the potential applications of TA and CMC-based Al2O3 nanofluids as effective and environmentally friendly solutions for coolant or lubrication in cutting processes.

Amphiphilic Dendronized Copolymer-Encapsulated Au, Ag and Pd Nanoparticles for Catalysis in the 4-Nitrophenol Reduction and Suzuki-Miyaura Reactions

The branched structures of dendronized polymers can provide good steric stabilization for metal nanoparticle catalysts. In this work, an amphiphilic dendronized copolymer containing hydrophilic branched triethylene glycol moieties and hydrophobic branched ferrocenyl moieties is designed and prepared by one-pot ring-opening metathesis polymerization, and is used as the stabilizer for metal (Au, Ag and Pd) nanoparticles. These metal nanoparticles (Au nanoparticles: 3.5 ± 3.0 nm; Ag nanoparticles: 7.2 ± 4.0 nm; Pd nanoparticles: 2.5 ± 1.0 nm) are found to be highly active in both the 4-nitrophenol reduction and Suzuki-Miyaura reactions. In the 4-nitrophenol reduction, Pd nanoparticles have the highest catalytic ability (TOF: 2060 h-1). In addition, Pd nanoparticles are also an efficient catalyst for Suzuki-Miyaura reactions (TOF: 1980 h-1) and possess good applicability for diverse substrates. The amphiphilic dendronized copolymer will open a new door for the development of efficient metal nanoparticle catalysts.

Pd nanoparticles anchored Co-MOF for nitrophenol reduction

Three nitrophenols are among the 126 priority toxic pollutants identified by the US Environmental Protection Agency. Catalyzing hydrogenation is a simple way to convert these toxic nitrophenols into harmless aminophenols. Commercial PdC has excellent catalytic hydrogenation activity but has weaknesses such as high price and low reusability. Here, we fabricated a series of nano-Pd 2D Co-MOF heterostructures and filtered for optimal Co-MOF@Pd0.0012, which contain ultra-low Pd content (0.08 wt%) and recorded high catalytic efficiency for 4-nitrophenol among the reported non-single atom catalyst due to edge and size effects. The TOF value of Co-MOF@Pd0.0012 is 9800 h-1, ∼206 times higher than that of PdC (Pd content, 10 wt%). Furthermore, Co-MOF@Pd0.0012 has been widely applied to catalyze the reduction of various nitrophenol substrates with higher than 99% conversion efficiency and selectivity.

Bimetallic (AuAg, AuPd and AgPd) nanoparticles supported on cellulose-based hydrogel for reusable catalysis

Biopolymer-derived hydrogels with low-cost and sustainable features have been considered as fascinating supported materials for metal nanoparticles. Cellulose, as the most abundant biopolymer, is a renewable raw material to prepare biopolymer-derived hydrogels for catalysis. Here, a cellulose-based hydrogel is designed to load bimetallic (AuAg, AuPd and AgPd) nanoparticles. 4-Nitrophenol reduction and Suzuki-Miyaura coupling reactions are selected to evaluate and compare the catalytic performance of the resulting bimetallic nanoparticle-loaded cellulose-based composite hydrogels. The bimetallic nanocomposite hydrogels are easy to be recycled over 10 times during the catalytic experiments and possess good applicability and generality for various substrates. The catalytic activity of bimetallic nanocomposite hydrogels was compared with recent literatures. In addition, the possible catalytic mechanism is also proposed. This work is expected to give a new insight for designing and preparing bimetallic nanoparticle-based cellulose hydrogels and proves its applicability and prospect in the catalytic field.

Bioorthogonal nanozymes: an emerging strategy for disease therapy

Transition metal catalysts (TMCs), capable of performing bioorthogonal reactions, have been engineered to trigger the formation of bioactive molecules in a controlled manner for biomedical applications. However, the widespread use of TMCs based biorthogonal reactions in vivo is still largely limited owing to their toxicity, poor stability, and insufficient targeting properties. The emergence of nanozymes (nanomaterials with enzyme-like activity), especially bioorthogonal nanozymes that combine the bioorthogonal catalytic activity of TMCs, the physicochemical properties of nanomaterials, and the enzymatic properties of classical nanozymes potentially provide opportunities to address these challenges. Thus, they can be used as multifunctional catalytic platforms for disease treatment and will be far-reaching. In this review, we first briefly recall the classical TMC-based bioorthogonal reactions. Furthermore, this review highlights the diverse strategies for manufacturing bioorthogonal nanozymes and their potential for therapeutic applications, with the goal of facilitating bioorthogonal catalysis in the clinic. Finally, we present challenges and the prospects of bioorthogonal nanozymes in bioorthogonal chemistry.

Highly Stable Core-Shell Nanocolloids: Synergy between Nano-Silver and Natural Polymers to Prevent Biofilm Formation

Active investment in research time in the development and study of novel unconventional antimicrobials is trending for several reasons. First, it is one of the ways which might help to fight antimicrobial resistance and bacterial contamination due to uncontrolled biofilm growth. Second, minimizing harmful environmental outcomes due to the overuse of toxic chemicals is one of the highest priorities nowadays. We propose the application of two common natural compounds, chitosan and tannic acid, for the creation of a highly crosslinked polymer blend with not only intrinsic antimicrobial properties but also reducing and stabilizing powers. Thus, the fast and green synthesis of fine spherically shaped Ag nanoparticles and further study of the composition and properties of the colloids took place. A positively charged core-shell nanocomposition, with an average size in terms of the metal core of 17 ± 4 nm, was developed. Nanoantimicrobials were characterized by several spectroscopic (UV-vis and FTIR) and microscopic (transmission and scanning electron microscopies) techniques. The use of AgNPs as a core and an organic polymer blend as a shell potentially enable a synergistic long-lasting antipathogen effect. The antibiofilm potential was studied against the food-borne pathogens Salmonella enterica and Listeria monocytogenes. The antibiofilm protocol efficiency was evaluated by performing crystal violet assay and optical density measurements, direct visualization by confocal laser scanning microscopy and morphological studies by SEM. It was found that the complex nanocomposite has the ability to prevent the growth of biofilm. Further investigation for the potential application of this stable composition in food packaging will be carried out.

Noble metal nanoparticles (Mx = Ag, Au, Pd) decorated graphitic carbon nitride nanosheets for ultrafast catalytic reduction of anthropogenic pollutant, 4-nitrophenol

We report an effective facile immobilization of noble nanoparticles (M_x = Ag, Au and Pd) assembled on g-C₃N₄ (g-CN) prepared via a simple ultra-sonication strategy. The M_x assembled g-CN nanocomposites were applied for the effective conversion of 4-nitrophenol (4-NP). As prepared nanocomposites were characterized by techniques of XRD, SEM-EDS, TEM, XPS, and FT-IR analysis to gain crystallographic structural, and morphological insights. The Pd@g-C₃N₄ (Pd@g-CN) nanocomposite exhibited best catalytic performance (k_app = 1.141 min^-1) toward the conversion of 4-NP to 4-aminophenol (4-AP), almost 100% within 4 min using aqueous sodium borohydride (NaBH₄). The higher catalytic efficiency of Pd@g-CN could be attributed to the surface electron density on the Pd and rapid electron transfer capacity. Interestingly, g-CN not only role as a stabilizer but also provided compatibility for noble metal deposition, which improves the chemical and morphological stability of noble metal nanoparticles. Different reaction parameters including concentrations of 4-NP, and catalyst amount were studied. These unique combinations make noble metal nanoparticles anchored g-CN nanosheets an ideal platform for catalysis applications and environmental remediation.

Green synthesis of Ag nanoparticles using elm pod polysaccharide for catalysis and bacteriostasis

The green synthesis of silver nanoparticles (Ag NPs) for catalysis and biological applications has gained great interest. Natural elm pods are a type of food that possesses anti-inflammatory and pain-relieving effects. In this study, elm pod polysaccharide (EPP) was extracted from elm pods using hot water extraction for the first time. Biocompatible EPP-stabilized silver nanoparticles (EPP-Ag_n NPs) were prepared by using a green synthesis method. The EPP-Ag₂₅ NPs had a hydrodynamic size of 40.9 nm and a highly negative surface charge of -27.4 mV. Furthermore, EPP-Ag₂₅ NPs exhibited high catalytic activity for the reduction of 4-nitrophenol, and the catalytic reaction followed a pseudo-first order kinetic equation. More importantly, the inhibition rate of EPP-Ag₂₅ NPs on Escherichia coli was 71 % when samples were treated with an 808 nm laser. Besides, EPP-Ag_n NPs effectively inhibited the proliferation of tumor cells irradiated by an 808 nm laser. The improved performance of EPP-Ag_n NPs was due to the good stability of EPP. Taken together, EPP-Ag_n NPs had good stability, catalytic activity, antibacterial and antitumor ability under laser irradiation. EPP is a good stabilizer for many nanoparticles which have broad applications in the field of catalysis and biomedicine in the future.

Pillararene-functionalized rhodium nanoparticles for efficient catalytic reduction and photothermal sterilization

Pillar[5]arene-functionalized rhodium nanoparticles are prepared for catalytic reduction of toxic nitrophenols and azo dyes and efficient photothermal sterilization.

4-Nitrophenol Efficient Photoreduction from Exfoliated and Protonated Phenyl-Doped Graphitic Carbon Nitride Nanosheets

The photoreduction of 4-nitrophenol to 4-aminophenol by means of protonated and exfoliated phenyl-doped carbon nitride is reported. Although carbon nitride-based materials have been recognized as efficient photocatalysts, the photoreduction of 4-nitrophenol to 4-aminophenol is not allowed because of the high recombination rate of the photogenerated electron–hole pairs. In this paper, we show the morphology effects on the photoactivity in phenyl-doped carbon nitride. Structural (TEM, XRD, Raman) and optical characterization (absorption, photoluminescence) of the protonated and exfoliated phenyl-doped carbon nitride (hereafter pePhCN) is reported. The increased photocatalytic efficiency, with respect to the bulk material, is underlined by the calculation of the kinetic constant of the photoreduction process (2.78 × 10⁻¹ min⁻¹ and 3.54 × 10⁻³ min⁻¹) for pePhCN and bulk PhCN, respectively. Finally, the detailed mechanism of the photoreduction process of 4-nitrophenol to 4-aminophenol by modified phenyl carbon nitride is proposed.