MoS2 decorated on one-dimensional MgFe2O4/MgO/C composites for high-performance microwave absorption

Multidimensional Engineering Induced Interfacial Polarization by in-Situ Confined Growth of MoS2 Nanosheets for Enhanced Microwave Absorption

Interface design has enormous potential for the enhancement of interfacial polarization and microwave absorption properties. However, the construction of interfaces is always limited in components of a single dimension. Developing systematic strategies to customize multidimensional interfaces and fully utilize advantages of low-dimensional materials remains challenging. Two-dimensional transition metal dichalcogenides (TMDCs) have garnered significant attention owing to their distinctive electrical conductivity and exceptional interfacial effects. In this study, a series of hollow TMDCs@C fibers are synthesized via sacrificial template of CdS and confined growth of TMDCs embedded in the fibers. The complex permittivity of the hollow TMDCs@C fibers can be adjusted by tuning the content of CdS templates. Importantly, the multidimensional interfaces of the fibers contribute to elevating the microwave absorption performance. Among the hollow TMDCs@C fibers, the minimum reflection loss (RLmin) of the hollow MoS2@C fibers can reach -52.0 dB at the thickness of 2.5 mm, with a broad effective absorption bandwidth of 4.56 GHz at 2.0 mm. This work establishes an alternative approach for constructing multidimensional coupling interfaces and optimizing TMDCs as microwave absorption materials.

MoS2 Decorated on 1D MoS2@Co/NC@CF Hierarchical Fibrous Membranes for Enhanced Microwave Absorption

The design and development of high-quality electromagnetic waves (EMW) absorbing materials play a vital role in combating the escalating negative effects of microwave radiation and interference. Herein, MoS2@Co/NC@CF fibrous membranes are successfully fabricated by electrospinning technology and carbonization, and a molybdenum disulfide (MoS2) layer is synthesized on the surface of these fibers via hydrothermal method. The seed-assisted growth method not only effectively avoids the accumulation and improves the loading of ZIF-67 particles, so as to ensure that the magnetic components in the fibers are evenly distributed in a wider range, rather than only intermittently present in some sites. Meanwhile, the introduction of semiconductor MoS2 as the shell further optimizes the impedance matching and improves the EMW absorption performance of the carbon fibrous membranes: the minimum reflection loss (RLmin) is -67.56 dB, and the maximum effective absorption bandwidth (EABmax) is further expanded to 6.56 GHz (2.1 mm, 11.44-18 GHz). This work provides a feasible method for developing high-efficient EMW-absorbing materials.

Tailored Magnetic Spatial Confinement with Enhanced Polarization and Magnetic Response for Electromagnetic Wave Absorption

For materials with coexisting phases, the transition from a random to an ordered distribution of materials often generates new mechanisms. Although the magnetic confinement effect has improved the electromagnetic (EM) performance, the transition from random to ordered magnetic confinement positions remains a synthetic challenge, and the underlying mechanisms are still unclear. Herein, precise control of magnetic nanoparticles is achieved through a spatial confinement growth strategy, preparing five different modalities of magnetic confined carbon fiber materials, effectively inhibiting magnetic agglomeration. Systematic studies have shown that the magnetic confinement network can refine CoNi NPs size and enhance strong magnetic coupling interactions. Compared to CoNi@HCNFs on the hollow carbon fibers (HCNFs) outer surface, HCNFs@CoNi constructed on the inner surface induce stronger spatial charge polarization relaxation at the interface and exhibit stronger magnetic coupling interactions at the inner surface due to the high-density magnetic coupling units at the micro/nanoscale, thereby respectively enhancing dielectric and magnetic losses. Remarkably, they achieve a minimum reflection loss (RLmin) of -64.54 dB and an absorption bandwidth of 5.60 GHz at a thickness of 1.77 mm. This work reveals the microscale mechanism of magnetic confinement-induced different polarization relaxation and magnetic response, providing a new strategy for designing magnetic materials.

Construction of Hierarchical Yolk-Shell Co/N-Dope C@void@C@MoS2 Composites with Multiple Heterogeneous Interfaces toward Broadband Electromagnetic Wave Absorption

The synthesis of materials with a multicomponent hierarchical structure is an essential strategy for achieving high-performance electromagnetic wave (EMW) absorption. However, conventional design strategies face challenges in terms of the rational construction of specific architecture. In this study, we employ a combined space-restricted and hierarchical construction strategy to surface-plant MoS2 nanosheets on yolk-shell structural carbon-modified Co-based composites, leading to the development of high-performance Co/NC@void@C@MoS2 absorbers with advanced architecture. The surface-planted MoS2 nanosheets, the Co/NC magnetic yolk, and the dielectric carbon shell work together to enhance the impedance matching characteristics and synergistic loss capabilities in the composites. Experimental results indicate that Co/NC@void@C-700@MoS2 exhibited the best absorption performance with an effective absorption bandwidth of 7.54 GHz (at 2.05 mm) and a minimum reflection loss of -60.88 dB (at 1.85 mm). Furthermore, radar cross-section simulation results demonstrate that Co/NC@void@C-700@MoS2 effectively suppresses the scattering and transmission of EMWs on perfect electric conductor substrates, implying its superior practical application value. This study provides inspiration and experimental basis for designing and optimizing EMW absorption materials with hierarchical yolk-shell architecture.

Synthesis of Hierarchical CF@Fe3O4 Fibers Decorated with MoS2 Layers Forming Core-Sheath Microstructure toward Tunable and Efficient Electromagnetic Wave Absorption

Hierarchical structural design has been verified as a feasible strategy to fabricate effective electromagnetic wave (EMW) absorbers, so we designed hierarchical core-sheath composites with magnetic particles and dielectric layers. In this work, a hierarchical structure of carbon fiber (CF)@Fe3O4@MoS2 (CPDF7-M) was prepared by introducing Fe3O4 and depositing MoS2 layers on the surface of fibers. Due to the synergistic effects from the CF@Fe3O4 increasing the conductive and magnetic loss and the outer MoS2 layers improving the impedance matching, the optimal reflection loss (RL) value was -63.1 dB at 2.7 mm and the effective absorption bandwidth (EAB) was 9.1 GHz covering the X and Ku band. Moreover, the EAB values were adjusted with a specific MoS2 loading at different thicknesses, which provided the necessary reference for the construction of efficient and flexible absorbers in the EMW absorption fields.

Large Microsphere Structure of a Co/C Composite Derived from Co-MOF with Excellent Wideband Electromagnetic Microwave Absorption Performance

In the field of electromagnetic wave (EMW) absorption, carbon matrix materials based on metal-organic frameworks (MOFs) have drawn more interest as a result of their outstanding advantages, such as porous structure, lightweight, controlled morphology, etc. However, how to broaden the effective absorption bandwidth [EAB; reflection loss (RL) ≤ -10 dB] is still a challenge. In this paper, large microsphere structures of a Co/C composite composed of small particle clusters were successfully prepared by the solvothermal method and annealing treatment. At a filling ratio of 40 wt %, the Co/C composite shows attractive microwave absorption (MA) performance after being annealed at 600 °C in an atmosphere of argon. With an EAB of 6.32 GHz (9.92-16.24 GHz) and a thickness of just 2.57 mm, the minimum RL can be attained at -54.55 dB. Most importantly, the EAB can attain 7.12 GHz (10.88-18.0 GHz) when the thickness is 2.38 mm, which is larger than that of the majority of MOF-derived composites. The superior MA performance is strongly related to excellent impedance matching and a higher attenuation constant. This study provides a simple strategy for synthesizing a MOF-derived Co/C composite with a wide EAB.

Design and synthesis of one-dimensional magnetic composites with Co nanoparticles encapsulated in carbon nanofibers for enhanced microwave absorption

With the increased usage of electromagnetic microwaves (EM) in wireless communication technology, the problem of electromagnetic radiation pollution has grown dramatically. This study successfully prepared novel Co/C magnetic nanocomposite fibers for EM absorption using the electrospinning and carbonization methods. The morphology, composition, magnetic properties, and EM absorption performance were extensively characterized. This material shows exceptional EM absorption performance, achieving -72.01 dB (at 2.08 mm) for minimum reflection loss (RLmin) and 5.4 GHz (at 1.68 mm) for effective absorption bandwidth (EAB). The performance surpasses not only any single precursor but also stands as the best in similar investigations. It can be attributed to the microstructure of magnetic Co nanoparticles encapsulated in carbon nanofibers and the macrostructure of cross-linked three-dimensional (3D) conductive networks. The combination of these structures resulted in excellent dielectric loss, magnetic loss, and impedance matching. This research offers new insights into the production of one-dimensional (1D) carbon-based absorbers, while also establishing a theoretical foundation for exploring the application potential of this material. These findings may contribute to the development of more efficient and practical EM absorption materials in the future.

Simple fabrication of cobalt-nickel alloy/carbon nanocomposite fibers for tunable microwave absorption

A series of CoNi/C nanocomposite fibers with different Co and Ni ratios were successfully prepared by electrospinning and carbonization techniques for the study of electromagnetic microwave (EMW) absorbing materials. We systematically studied the influence of Co and Ni content on the microstructure, chemical composition, magnetic properties, and EMW absorption characteristics of the samples. The results showed that CoNi/C nanocomposite fibers obtained excellent EMW absorption ability through the reasonable design of the composition, and the Co/Ni ratio significantly affected the microstructure and EMW absorption performance. When the Co/Ni ratio was 1/3, the minimum reflection loss (RLmin) is -71.2 dB (2.4 mm, 13.4 GHz), and the maximum effective absorption bandwidth (EAB, RL＜-10 dB) is up to 5.9 GHz (2.2 mm, 12.1-18 GHz), covering almost the entire Ku band. This study demonstrated the enormous potential of one-dimensional structure in the field of EMW absorption. In addition, the CoNi/C nanocomposite fiber synthesized using a straightforward and low-cost method not only has excellent EMW absorption performance but also has the potential for practical application. The results of this study provide a simple and effective approach for designing high-performance EMW absorbing materials.

Controlled Synthesis of MOF-Derived Nano-Microstructure toward Lightweight and Wideband Microwave Absorption

Correlating metal-organic framework (MOF) synthesis processes and microwave absorption (MA) enhancement mechanisms is a pioneer project. Nevertheless, the correlation process still relies mainly on empirical doctrine, which hardly corresponds to the specific mechanism of the effect on the dielectric properties. Hereby, after the strategy of modulation of protonation engineering and solvothermal temperature in the synthesis route, the obtained sheet-like self-assembled nanoflowers were constructed. Porous structures with multiple heterointerfaces, abundant defects, and vacancies are obtained by controlled design of the synthesis procedure. The rearrangement of charges and enhanced polarization can be promoted. The designed electromagnetic properties and special nano-microstructures of functional materials have significant impact on their electromagnetic wave energy conversion effects. As a consequence, the MA performance of the samples has been enhanced toward broadband absorption (6.07 GHz), low thickness (2.0 mm), low filling (20%), and efficient loss (-25 dB), as well as being suitable for practical environmental applications. This work establishes the connection between the MOF-derived materials synthesis process and the MA enhancement mechanism, which provides insight into various microscopic microwave loss mechanisms.

In situ generated gas bubble-directed self-assembly of multifunctional MgO-based hybrid foams for highly efficient thermal conduction, microwave absorption, and self-cleaning

Developing multifunctional materials with superior thermal conductivity and microwave absorption is an effective means to address the increasingly serious electromagnetic (EM) compatibility and heat dissipation problems in modern electron devices. Here, multifunctional MgO/Mg(OH)2/C, MgO/M/C (M = Co, Ni, Cu), and MgO/NOx/C (N = Fe, Mn) hybrid foams were synthesized using a facile one-step gas-bubble-assisted combustion method, and their texture, composition, and properties were regulated by tuning salt type and feeding ratio. Our results show that the MgO/Co/C foams have high thermal conductivity (3.40-4.09 W m-1 K-1) with a filler load of 20-50 wt% at the Co2+ molar content of φ = 70 mol% and excellent EM wave absorption (EABW = 11.44 GHz), with a thickness of 2.1 mm and a minimal reflection loss of -59.42 dB at φ = 90 mol%. The enhanced properties are ascribed to the construction of foams with 3D interconnected networks and the synergistic effect of magnetic Co, insulating MgO, and dielectric C, which provide a continuous pathway for electron/phonon relay transmission and magnetic/dielectric dual losses. Moreover, the MgO/Co/C foams possess strong mechanical/hydrophobicity performance, tunable magnetic properties, and electrical conductivity, and can be applied in self-cleaning, electromagnetic interference, and heat management. Overall, this study offers a novel understanding of preparing multifunctional heat conductive-EM wave absorptive foam materials in modern electronic devices.

Heterostructured Ni3B/Ni nanosheets for excellent microwave absorption and supercapacitive application

The development of electronic information technology has placed higher demands on microwave absorption materials (MAMs), especially the exploration of novel MAMs to broaden their application. At present, little attention has been given the wave absorption properties of transition metal borides (TMBs). In this work, a simple and economical method is developed to prepare Ni₃B/Ni heterostructure nanosheets and their possible applications for microwave absorption (MA) and supercapacitor are evaluated. It is worth noting that Ni₃B/Ni nanosheets exhibit excellent MA properties due to the aggregated nanosheet-like morphology of Ni₃B/Ni with enhancing interfacial polarization, as well as the synergistic effect of dielectric and magnetic losses. It is observed in experiments that the minimum reflection loss value of Ni₃B/Ni is -41.60 dB at 16.8 GHz. Moreover, the maximum effective absorption bandwidth can reach 3.28 GHz. Furthermore, Ni₃B/Ni has good energy storage characteristics and is able to provide a specific capacity of 1150.6F g^-1 at a current density of 1 A g^-1. Meanwhile, it has the ability to maintain an initial capacity of 74.4 % after 1000 cycles at a current density of 10 A g^-1. Therefore, this study provides an idea to explore TMBs as high-performance MA and supercapacitor materials.

Multifunctional Epoxy-Based Electronic Packaging Material MDCF@LDH/EP for Electromagnetic Wave Absorption, Thermal Management, and Flame Retardancy

The sharp reduction in size and increase in power density of next-generation integrated circuits lead to electromagnetic interference and heat failure being a key roadblock for their widespread applications in polymer-based electronic packaging materials. This work demonstrates a multifunctional epoxy-based composite (MDCF@LDH/EP) with high electromagnetic wave (EMW) absorption, thermal conductivity, and flame retardancy performance. In which, the synergistic effect of porous structure and heterointerface promotes the multiple reflection and absorption, and dielectric loss of EMW. A low reflection loss of -57.77 dB, and an effective absorption bandwidth of 7.20 GHz are achieved under the fillings of only 10 wt%. Meanwhile, a 241.4% enhanced thermal conductivity of EP is due to the high continuous 3D melamine-derived carbon foams (MDCF), which provides a broad path for the transport of phonons. In addition, MDCF@LDH/EP composite exhibits high thermal stability and flame retardancy, thanks to the physical barrier effect of MDCF@LDH combined with the high temperature cooling properties of NiAl-LDH-CO₃ ^2- . Compared with pure epoxy resin, the peak heat release rate and the total heat release rate are reduced by 19.4% and 30.7%, respectively. Such an excellent comprehensive performance enables MDCF@LDH/EP to a promising electronic packaging material.

Flexible N-doped carbon fibers decorated with Cu/Cu2O particles for excellent electromagnetic wave absorption

Flexible N-doped carbon fibers decorated with Cu/Cu₂O particles (NCF-Cu/Cu₂O) are synthesized through electrospinning, preoxidation and carbonization processes in this work. The characterization results indicate that HKUST-1 is embedded in polyacrylonitrile (PAN) fibers, and a special structure in which Cu/Cu₂O particles are strung together by carbon fibers is formed after preoxidation and carbonization. NCF-Cu/Cu₂O is mixed with paraffin in different mass ratios (5%, 10%, 15%, 20% and 25%) to study electromagnetic (EM) wave absorption performance at frequencies from 2.0 GHz to 18.0 GHz. When the filling ratio is 10%, the maximum reflection loss (RL) value is -50.54 dB at 14.16 GHz with a thickness of 2.4 mm, and the maximum effective absorption bandwidth (EAB) value reaches 7.2 GHz (10.8 ∼ 18.0 GHz) with a thickness of 2.6 mm. The NCF-Cu/Cu₂O composite fibers exhibit strong absorption, broad bandwidth, low filling ratio and thin thickness, and the corresponding absorption mechanism is analyzed in detail. The excellent EM wave absorption performance is attributed to a suitable attenuation ability, good impedance matching, conductive loss, interfacial polarization, dipole polarization, multiple reflections and scattering. This work provides a research reference for the application of flexible carbon-based composite fibers in the field of EM wave absorption.

A hollow CuS@Mn(OH)2 particle with double-shell structure for Ultra-wide band electromagnetic absorption

Hollow materials have many advantages when acting as electromagnetic wave (EMW) absorber, such as excellent impedance matching properties, rich micro-interfaces and light weight. In this work, a novel hollow particle with double-shell composed with CuS and Mn(OH)₂ is synthesized by coordination etching, precipitation and sulfuration using tetrakaidecahedral Cu₂O as template. These hollow particles are expected to be used as improved EMW absorption property at an ultra-wide band. In this hollow particle, tetrakaidecaheral CuS acts as inner shell and Mn(OH)₂ acted as outer shell, thus having rich heterogeneous interfaces which induce strong interfacial polarization. Moreover, the lower electrical conductivity and loose structure of the Mn(OH)₂ shell facilitates the entry of EMW into the absorbers, and the hollow structure in this particle is beneficial to improve the impedance matching according to Maxwell-Garnett (MG) theory. Therefore, hollow CuS@Mn(OH)₂ particles with double-shell exhibit excellent EMW absorption performance. The effective absorption bandwidth (reflection loss (RL) ≤ -10 dB) is 6.88 GHz (from 11.12 GHz to 18 GHz) at 2.3 mm thickness of sample.

Fabrication of bimetallic metal-organic frameworks derived cobalt iron alloy@carbon-carbon nanotubes composites as ultrathin and high-efficiency microwave absorbers

Developing lightweight and high-efficiency microwave absorbents derived from metal-organic frameworks (MOFs) was proven to be a promising strategy to solve the increasingly serious problem of electromagnetic radiation pollution. In this work, nitrogen-doped cobalt iron alloy@carbon-carbon nanotubes (CoFe alloy@C-CNTs) composites were fabricated through an aging and pyrolysis two-step method. Results revealed that the attained composites presented a unique four-pointed star morphology and lots of CoFe alloy nanoparticles were uniformly embedded into the porous carbon matrix. Moreover, it was found that the pyrolysis temperature had a notable effect on the microwave absorption properties of CoFe alloy@C-CNTs composites. Remarkably, the obtained composite under 700.0 °C pyrolysis treatment showed the optimal minimum reflection loss of -54.5 dB with an ultrathin thickness of 1.4 mm and maximum effective absorption bandwidth of 5.0 GHz at a low thickness of 1.6 mm. Additionally, the possible electromagnetic attenuation loss mechanisms of attained composites were illuminated. It was believed that our results could be helpful for fabricating ultrathin and high-performance microwave absorbing materials derived from MOFs.

Bimetallic ZIF-derived conductive network of Co–Zn@NPC@MWCNT nanocomposites for efficient electromagnetic wave absorption in the whole X-band

Bimetallic ZIFs-derived Co-Zn@NPC@MWCNTs nanocomposites are successfully fabricated, which possess double absorption peaks of −76.18 dB and −33.09 dB with a thickness of 3.187 mm. The composites exhibit a bandwidth of 6.56 GHz with 3.0 mm thickness.

Flexible and transparent silver nanowires/biopolymer film for high-efficient electromagnetic interference shielding

Flexible and transparent conductive films are highly desirable in some optoelectronic devices, such as smart windows, touch panels, as well as displays and electromagnetic protection field. Silver nanowire (Ag NW) has been considered as the best material to replace indium tin oxide (ITO) to fabricate flexible transparent electromagnetic interference (EMI) shielding films due to its superior comprehensive performance. However, the common substrates supporting Ag NWs require surface modification to enhance the adhesion with Ag NWs. In this work, a flexible and transparent Ag NWs EMI shielding film with sandwich structure through a facile rod-coating method, wherein Ag NWs network were embedded between biodegradable gelatin-based substrate and cover layer. The interfacial adhesion between Ag NWs and gelatin-based layers was enhanced by hydrogen-bonding interaction and swelling effect without any pretreatment. The shielding effectiveness (SE) of the G/Ag NW/G (G represents gelatin-based layer) film reaches 37.74 dB at X band with an optical transmittance of 72.0 %. What's more, the flexible gelatin-based layer and encapsulated structure endow the resultant G/Ag NW/G film integrating excellent mechanical properties, reliable durability, antioxidation, as well as anti-freezing performance. This work paves a new way for fabricating flexible transparent EMI shielding films.