Flowerlike BiOCl nanospheres fabricated by an in situ self-assembly strategy for efficiently enhancing photocatalysis

Copper-doped bismuth oxychloride nanosheets assembled into sphere-like morphology for improved photocatalytic inactivation of drug-resistant bacteria

The devastating microbiological contamination as well as emerging drug-resistant bacteria has posed severe threats to the ecosystem and public health, which propels the continuous exploitation of safe yet efficient disinfection products and technology. Here, copper doping engineered bismuth oxychloride (Cu-BiOCl) nanocomposite with a hierarchical spherical structure was successfully prepared. It was found that due to the exposure of abundant active sites for the adsorption of both bacteria cells and molecular oxygen in the structure, the obtained Cu-BiOCl with nanosheets assembled into sphere-like morphology exhibited remarkable photocatalytic antibacterial effects. In particular, compared to the pure BiOCl, composite Cu-BiOCl possessed improved antibacterial effects against Escherichia coli (E. coli), Staphylococcus aureus (S. aureus), and Methicillin-resistant Staphylococcus aureus (MRSA). The combination of physicochemical characterizations and theoretical calculations has revealed that copper doping significantly promoted the light absorbance, inhibited the recombination of electron-hole pairs, and enhanced molecular oxygen adsorption, which resulted in more generation of active species including reactive oxygen species (ROS) and h+ to achieve superior photocatalytic bacterial inactivation. Finally, transcriptome analysis on MRSA pinpointed photocatalytic inactivation induced by Cu-BiOCl may retard largely the development of drug-resistance. Therefore, the built spherical Cu-BiOCl nanocomposite has provided an ecofriendly, economical and robust strategy for the efficient removal of drug-resistant bacteria with promising potentials for environmental and healthcare utilizations.

Fabrication of OVs enriched BiOCl microflowers doped with Fe3+ for effective destruction of two typical contaminants

In this study, a one-step solvothermal method was used to fabricate Fe3+ doped BiOCl microflowers with abundant oxygen vacancies (OVs) in the presence of glacial acetic acid. Various analytical techniques were employed to characterize the structural, morphological, and optical properties of the prepared samples. The presence of OVs was confirmed by low temperature electron paramagnetic resonance (EPR) analysis. The photocatalytic results show that Fe3+ doped BiOCl photocatalysts have higher activity than the bare BiOCl, and 10% Fe3+/BiOCl exhibits the highest photocatalytic performance, the photocatalytic efficiency of this sample is 2.3 and 1.1 times higher than that of the blank BiOCl toward photocatalytic degradation of perfluorooctanoic acid (PFOA) and rhodamine B (RhB), respectively. Furthermore, Fe3+ doped BiOCl demonstrates excellent reusability. Based on the experimental observations, an enhancement mechanism for the photocatalytic activity of Fe3+ doped BiOCl was reasonably elucidated.

BiOCl Nanosheets with (001), (002), and (003) Dominant Crystal Faces with Excellent Light-Degradation Ability

Gray bismuth chloride nanosheets with a highly enhanced electric field intensity were prepared by a simple and efficient method. Their energy gap is reduced to 2.35 eV. The prepared nanosheets show high photocatalytic activity for the degradation of rhodamine B under visible light. The resulting samples were characterized by X-ray diffractometry, high-resolution scanning electron microscopy, X-ray photoelectron spectroscopy, infrared spectroscopy, UV-vis diffuse reflectance spectroscopy, specific surface area analysis, electrochemical analysis, electron paramagnetic resonance, and UV-vis spectroscopy. The photocatalytic activity of prepared BiOCl was evaluated by the degradation of RhB. The prepared BiOCl sample (0.5 g/L) could completely degrade RhB (10 mg/L) within 10 min, and its visible photocatalytic activity was 80 times that of the original white BiOCl. Superoxide radicals were the main active substance involved in organic degradation.

Synergistic photocatalytic degradation mechanism of BiOClxI1-x-OVs based on oxygen vacancies and internal electric field-mediated solid solution

The easy recombination of photoexcited electron-hole pairs is a serious constraint for the application of photocatalysts. In this work, a range of BiOClxI1-x solid solutions with abundant oxygen vacancies (BiOClxI1-x-OVs) were synthesized. In particular, the optimal BiOCl0.5I0.5-OVs sample exhibited almost 100% removal of bisphenol A (BPA) within 45 min visible light exposure, which was 22.4, 3.1 and 4.5 times greater than BiOCl, BiOCl-OVs and BiOCl0.5I0.5, respectively. Besides, the apparent quantum yield of BPA degradation reaches 0.24%, better than some other photocatalysts. Benefiting from the synergism of oxygen vacancies and solid solution, BiOCl0.5I0.5-OVs gained an enhanced photocatalytic capacity. Oxygen vacancies induced an intermediate defective energy level in BiOClxI1-x-OVs materials, promoting the generation of photogenerated electrons and the molecular oxygen adsorption to produce more active oxygen radicals. Meanwhile, the fabricated solid solution structure enhanced the internal electric field between BiOCl layers, achieving rapid migration of photoexcited electrons and effective segregation of photoinduced charge carriers. Thus, this study provides a viable idea to solve the problems of poor visible light absorption of BiOCl-based photocatalysts and easy reorganization of electrons and holes in the photocatalysts.

Achieving High Selectivity in Photocatalytic Oxidation of Toluene on Amorphous BiOCl Nanosheets Coupled with TiO2

The inert C(sp³)-H bond and easy overoxidation of toluene make the selective oxidation of toluene to benzaldehyde a great challenge. Herein, we present that a photocatalyst, constructed with a small amount (1 mol %) of amorphous BiOCl nanosheets assembled on TiO₂ (denoted as 0.01BOC/TiO₂), shows excellent performance in toluene oxidation to benzaldehyde, with 85% selectivity at 10% conversion, and the benzaldehyde formation rate is up to 1.7 mmol g^-1 h^-1, which is 5.6 and 3.7 times that of bare TiO₂ and BOC, respectively. In addition to the charge separation function of the BOC/TiO₂ heterojunction, we found that the amorphous structure of BOC endows its abundant surface oxygen vacancies (Ov), which can further promote the charge separation. Most importantly, the surface Ov of amorphous BOC can efficiently adsorb and activate O₂, and amorphous BOC makes the product, benzaldehyde, easily desorb from the catalyst surface, which alleviates the further oxidation of benzaldehyde, and results in the high selectivity. This work highlights the importance of the microstructure based on heterojunctions, which is conducive to the rational design of photocatalysts with high performance in organic synthesis.

Near-Ultraviolet Light-Driven Photocathodic Activity for (001)-Oriented BiOCl Thin Films Synthesized by Mist Chemical Vapor Deposition

Semitransparent and homogeneous bismuth oxychloride (BiOCl) thin films with (001) preferred orientation were synthesized on polycrystalline Sn:In₂O₃-glass substrates by mist chemical vapor deposition. The films showed photocathodic activity even under near-ultraviolet light within the band gap due to the in-gap states induced by oxygen vacancies. Higher synthesis temperatures resulted in a significant increase of photocurrent density under ultraviolet light. While the longer lifetime of photocarriers led to an increase of internal quantum efficiency, the larger band-edge absorption significantly contributed to the higher external quantum efficiency.

In situ synthesis of a Bi2O3 quantum dot decorated BiOCl heterojunction with superior photocatalytic capability for organic dye and antibiotic removal

As a decoration method, coupling a photocatalyst with semiconductor quantum dots has been proven to be an efficient strategy for enhanced photocatalytic performance. Herein, a novel BiOCl nanosheet decorated with Bi₂O₃ quantum dots (QDs) was first synthesized by a facile one-step in situ chemical deposition method at room temperature. The as-prepared materials were characterized by multiple means of analysis. The Bi₂O₃QDs with an average diameter of about 8.0 nm were uniformly embedded on the surface of BiOCl nanosheets. The obtained Bi₂O₃QDs/BiOCl exhibited significantly enhanced photocatalytic performance on the degradation of the rhodamine B and ciprofloxacin, which could be attributed to the band alignment, the photosensitization effect and the strong coupling between Bi₂O₃ and BiOCl. In addition, the dye photosensitization effect was demonstrated by the monochromatic photodegradation experiments. The radical trapping experiments and the ESR testing demonstrated the type II charge transfer route of the heterojunction. Finally, a reasonable photocatalytic mechanism based on the relative band positions was discussed to illustrate the photoreaction process. These findings provide a good choice for the design and potential application of BiOCl-based photocatalysts in water remediation.

Versatile iodine-doped BiOCl with abundant oxygen vacancies and (110) crystal planes for enhanced pollutant photodegradation

Crystal plane regulation, defect engineering, and element doping can effectively solve the problems of large band gaps, poor light absorption, and fast recombination of BiOCl. In this work, iodine-doped BiOCl (I/BiOCl) nanowafers with abundant (110) crystal planes and oxygen vacancies (OV) were prepared by a simple hydrothermal method and assessed for pollutant photodegradation. I/BiOCl with a molar ratio of I to Cl of 0.6 (I_0.6/BiOCl) degraded under visible light 95.8% of the toxic dye rhodamine B and 85.1% of the persistent antibiotic tetracycline in 5 and 10 min, respectively. In comparison, unmodified BiOCl photodegraded only between 42.0% and 48.2% of these critical water pollutants. Furthermore, I_0.6/BiOCl was highly stable with most of its photocatalytic activity remaining after 4 cycles. Three reasons explain the excellent photodegradation properties of I_0.6/BiOCl. First, the doped photocatalyst grew abundant (110) crystal planes, which inhibits the recombination of photogenerated electron-hole pairs. Second, the large quantity of OV present in I_0.6/BiOCl increased active sites for reactive oxygen species generation, improved photogenerated charge separation, and pollutants adsorption. Lastly, I_0.6/BiOCl had a modified electronic band structure enhancing light absorption. Overall, these results describe a promising photocatalyst capable of degrading efficiently major pollutants with different structures.

Facet synergy dominant Z-scheme transition in BiOCl with enhanced 1O2 generation

BiOCl powders with different morphology were obtained through self-assembling. Their photocatalytic performance was tested through degradation of organic dye and mechanism of photocatalytic for obtained samples were investigated. Relevant characterization demonstrated that facet synergy was a main reason of photocatalytic performance promotion due to changed facet exposure and proportion under self-assembling. Theory and experimental analysis manifested that synergistic facet stimulated Z scheme transition in samples with lower (001) facet proportion, which provided favorable condition of ¹O₂ generation and simultaneously generated prominent charge separation. This work unveiled the facet synergy dominant photocatalytic performance improvement in self-assembling system of BiOCl and verified decisive role of facet proportion in constructing Z-scheme facet junction, which also prompted possibility of improving ¹O₂ generation through facet engineering under self-assembling.

Degradation and detoxification of broad-spectrum antibiotics by small molecular intercalated BiOCl under visible light

In view of the increasing threat of overuse of broad-spectrum antibiotics to water environment, here, a series of small molecular intercalated bismuth oxychloride (SBC-X) composite photocatalysts were successfully constructed by a simple stirring synthesis at room temperature. Among them, SBC-0.5 showed excellent photocatalytic performance against the three target broad-spectrum antibiotics in visible light, which was 3.06 times, 5.93 times and 11.64 times higher than that of monomer for degrading tetracycline, norfloxacin and ciprofloxacin, respectively. Through analysis, it was found that the excellent photocatalytic degradation performance of SBC-0.5 was mainly attributed to the greatly improved specific surface area, which increased to 14 times of monomer, providing a large number of reaction sites for the subsequent photocatalytic degradation. Besides, intercalated molecules as charge transfer bridges between nanosheets greatly accelerated the efficiency of photogenerated charge transfer between layers. Free radical trapping experiments and electron spin resonance indicated that superoxide anion radicals played a major role in the photocatalytic degradation, followed by singlet oxygen. Furthermore, nine potential degradation intermediates were identified, and the toxicity was greatly reduced confirmed by ECOSAR software prediction and soybean seed germination and seeding growth experiment. Our work will provide useful information for the purification of wastewater containing antibiotics.

In situ synthesis of novel type Ⅱ BiOCl/CAU-17 2D/2D heterostructures with enhanced photocatalytic activity

A novel type Ⅱ BiOCl/CAU-17 2D/2D heterostructures photocatalyst was synthesized by in-situ growth of ultrathin BiOCl on the surface of CAU-17 nanorods through a solvothermal process. The 2D/2D heterostructures endow...