A new potassium dual-ion hybrid supercapacitor based on battery-type Ni(OH)2 nanotube arrays and pseudocapacitor-type V2O5-anchored carbon nanotubes electrodes

Facile Synthesis of Mesoporous Nanohybrid Two-Dimensional Layered Ni-Cr-S and Reduced Graphene Oxide for High-Performance Hybrid Supercapacitors

This study describes the single-step synthesis of a mesoporous layered nickel-chromium-sulfide (NCS) and its hybridization with single-layered graphene oxide (GO) using a facile, inexpensive chemical method. The conductive GO plays a critical role in improving the physicochemical and electrochemical properties of hybridized NCS/reduced GO (NCSG) materials. The optimized mesoporous nanohybrid NCSG is obtained when hybridized with 20% GO, and this material exhibits a very high specific surface area of 685.84 m2/g compared to 149.37 m2/g for bare NCS, and the pore diameters are 15.81 and 13.85 nm, respectively. The three-fold superior specific capacity of this optimal NCSG (1932 C/g) is demonstrated over NCS (676 C/g) at a current density of 2 A/g. A fabricated hybrid supercapacitor (HSC) reveals a maximum specific capacity of 224 C/g at a 5 A/g current density. The HSC reached an outstanding energy density of 105 Wh/kg with a maximum power density of 11,250 W/kg. A 4% decrement was observed during the cyclic stability study of the HSC over 5000 successive charge-discharge cycles at a 10 A/g current density. These results suggest that the prepared nanohybrid NCSG is an excellent cathode material for gaining a high energy density in an HSC.

Decorating MnO2 nanosheets on MOF-derived Co3O4 as a battery-type electrode for hybrid supercapacitors

Metal–organic framework-derived materials are now considered potential next-generation electrode materials for supercapacitors. In this present investigation, Co₃O₄@MnO₂ nanosheets are synthesized using ZIF-67, which is used as a sacrificial template through a facile hydrothermal method. The unique vertically grown nanosheets provide an effective pathway for rapidly transporting electrons and ions. As a result, the ZIF-67 derived Co₃O₄@MnO₂-3 electrode material shows a high specific capacitance of 768 C g⁻¹ at 1 A g⁻¹ current density with outstanding cycling stability (86% retention after 5000 cycles) and the porous structure of the material has a good BET surface area of 160.8 m² g⁻¹. As a hybrid supercapacitor, Co₃O₄@MnO₂-3//activated carbon exhibits a high specific capacitance (82.9 C g⁻¹) and long cycle life (85.5% retention after 5000 cycles). Moreover, a high energy density of 60.17 W h kg⁻¹ and power density of 2674.37 W kg⁻¹ has been achieved. This attractive performance reveals that Co₃O₄@MnO₂ nanosheets could find potential applications as an electrode material for high-performance hybrid supercapacitors.

Metal–organic framework-derived materials are now considered potential next-generation electrode materials for supercapacitors.

Fabrication of three-dimensional WO3 nanotube bundles on carbon cloth as a binder-free electrode for high-performance supercapacitors

The WO3 nanotube bundles are fabricated on carbon cloth, exhibiting high specific capacitance, low charge transfer resistance, and excellent stability.

Oxygen-vacancy abundant alpha bismuth oxide with enhanced cycle stability for high-energy hybrid supercapacitor electrodes

Bi₂O₃ is an outstanding electrode material due to its high theoretical specific capacity. Hence, the synthesis of δ-Bi₂O₃ materials with high oxygen-vacancy contents could improve their electrochemical performances but causes easy conversion to α-Bi₂O₃ with low oxygen-vacancy contents, leading to poor cycling stability and limited practical applications. To overcome these problems, an effective strategy for constructing high oxygen vacancies α-Bi₂O₃ on activated carbon fiber paper (ACFP) is developed in this study. To this end, ACFP/Bi(OH)₃ is first synthesized by the solvothermal method and then converted to ACFP/α-Bi₂O₃ by in situ electrochemical activation. The proposed innovative electrochemical method quickly and easily introduces oxygen vacancies while preserving the three-dimensional structure, thereby promoting the charge transfer and ions diffusion in ACFP/α-Bi₂O₃. Consequently, the specific capacity of ACFP/α-Bi₂O₃ reaches 906C g^-1 at 1 A g^-1, and the capacity retention remains above 70% after 3000 cycles, a value higher than that of δ-Bi₂O₃ (45%). Furthermore, the hybrid supercapacitor device assembled by ACFP/α-Bi₂O₃ delivers a maximum energy density of 114.9 Wh kg^-1 at 900 W kg^-1 and outstanding cycle stability with 73.56 % retention after 5500 cycles. In sum, the proposed ACFP/α-Bi₂O₃ with high performance and good stability looks promising for use as bismuth-based anode materials in supercapacitors and aqueous batteries.