Nickel clusters accelerating hierarchical zinc indium sulfide nanoflowers for unprecedented visible-light hydrogen production

Phosphotungstic Acid Clusters Decorated Znln2S4 Nanoflowers as Molecular-Scale S-Scheme Heterojunctions for Simultaneous H2 Evolution and Benzyl Alcohol Upgrading

Simultaneous utilization of photogenerated electrons and holes to achieve overall redox reactions is attractive but still far from practical application. The emerging step (S)-scheme mechanism has proven to be an ideal approach to inhibit charge recombination and supply photoinduced charges with highest redox potentials. Herein, a hierarchical phosphotungstic acid (H3PW12O40, HPW)@Znln2S4 (ZISW) heterojunction was prepared through one-pot hydrothermal method for simultaneous hydrogen (H2) evolution and benzyl alcohol upgrading. The fabricated HPW-based heterojunctions indicated much enhanced visible-light absorption, promoted photogenerated charge transfer and inhibited charge recombination, owing to hierarchical architecture based on visible-light responsive Znln2S4 microspheres, and S-scheme charge transfer pathway. The S-scheme mechanism was further verified by free-radical trapping electron spin resonance (ESR) spectra. Moreover, the wettability of composite heterojunction was improved by the modification of hydrophilic HPW, contributing to gaining active hydrogen (H+) from water sustainably. The optimal ZISW-30 heterojunction photocatalyst indicated an enhanced hydrogen evolution rate of 27.59 mmol g-1 h-1 in benzyl alcohol (10 vol. %) solution under full-spectrum irradiation, along with highest benzaldehyde production rate is 8.32 mmol g-1 h-1. This work provides a promising guideline for incorporating HPW into S-scheme heterojunctions to achieve efficient overall redox reactions.

Dynamic defects boost in-situ H2O2 piezocatalysis for water cleanup

Creating efficient catalysts for simultaneous H2O2 generation and pollutant degradation is vital. Piezocatalytic H2O2 synthesis offers a promising alternative to traditional methods but faces challenges like sacrificial reagents, harsh conditions, and low activity. In this study, we introduce a cobalt-loaded ZnO (CZO) piezocatalyst that efficiently generates H2O2 from H2O and O2 under ultrasonic (US) treatment in ambient aqueous conditions. The catalyst demonstrates exceptional performance with ~50.9% TOC removal of phenol and in situ generation of 1.3 mM H2O2, significantly outperforming pure ZnO. Notably, the CZO piezocatalyst maintains its H2O2 generation capability even after multiple cycles, showing continuous improvement (from 1.3 mM to 1.8 mM). This is attributed to the piezoelectric electrons promoting the generation of dynamic defects under US conditions, which in turn promotes the adsorption and activation of oxygen, thereby facilitating efficient H2O2 production, as confirmed by EPR spectrometry, XPS analysis, and DFT calculations. Moreover, the CZO piezocatalysts maintain outstanding performance in pollutant degradation and H2O2 production even after long periods of inactivity, and the deactivated catalyst due to metal ion dissolution could be rejuvenated by pH adjustment, offering a sustainable solution for wastewater purification.

Rational Photodeposition of Cobalt Phosphate on Flower-like ZnIn2S4 for Efficient Photocatalytic Hydrogen Evolution

The high electrons and holes recombination rate of ZnIn2S4 significantly limits its photocatalytic performance. Herein, a simple in situ photodeposition strategy is adopted to introduce the cocatalyst cobalt phosphate (Co-Pi) on ZnIn2S4, aiming at facilitating the separation of electron-hole by promoting the transfer of photogenerated holes of ZnIn2S4. The study reveals that the composite catalyst has superior photocatalytic performance than blank ZnIn2S4. In particular, ZnIn2S4 loaded with 5% Co-Pi (ZnIn2S4/5%Co-Pi) has the best photocatalytic activity, and the H2 production rate reaches 3593 μmol·g-1·h-1, approximately double that of ZnIn2S4 alone. Subsequent characterization data demonstrate that the introduction of the cocatalyst Co-Pi facilitates the transfer of ZnIn2S4 holes, thus improving the efficiency of photogenerated carrier separation. This investigation focuses on the rational utilization of high-content and rich cocatalysts on earth to design low-cost and efficient composite catalysts to achieve sustainable photocatalytic hydrogen evolution.

Nickel-Based Bifunctional Cocatalyst to Enhance CdS Photocatalytic Hydrogen Production

The design of nanocomposites as a light-capturing system applied in photocatalytic water splitting is an emerging area of research. In our study, a simple in situ photodeposition method was proposed for the synthesis of CdS nanoflowers modified by nickel-based bifunctional, i.e., Ni/Ni(OH)2, cocatalysts. The introduction of cocatalysts has demonstrated a notable enhancement in the photocatalytic hydrogen evolution efficiency of CdS. The quantity of cocatalysts supported on CdS played an important role in governing the light absorption capability and photocatalytic efficacy. Ni-CdS-10 showed the best photocatalytic activity of 30.51 mmol g-1 h-1, which was 1.8 times and 2.6 times higher activity than Pt-CdS-1 wt % and pure CdS, respectively. Mechanism studies with UV-vis DRS, photoluminescence, and Mott-Schottky plots revealed the intrinsic electric field created at the p-n Ni(OH)2/CdS junctions, which can effectively implement the transport and separation of photoinduced carriers. From linear sweep voltammetry, electrochemical impedance spectroscopy, and DFT calculation, both Ni(OH)2 and Ni can effectively decrease the Gibbs free energies of hydrogen adsorption and reduce the overpotential of hydrogen evolution. As a result, the efficiency of generating H2 through photocatalysis experienced significant improvement, and the participation of bifunctional cocatalysts further reduced the photocorrosion of CdS, enhanced stability, improved low price, and efficient photocatalyst production.

Interfacial electron modulation of 2D nanopetal ZnIn2S4 with edge-decorated Ni clusters for accelerated photocatalytic H2 evolution

Heterostructure interfacial engineering between photocatalyst and co-catalyst to obtain an optimized electronic structure is a promising approach to improving their performance in the photocatalytic hydrogen evolution reaction (HER). In this work, two-dimensional nanopetal-like ZnIn2S4 (ZIS) with an adequately exposed active (110) edge facet-decorated Ni cluster heterostructure was prepared via chemical bath deposition, followed by photodeposition. In the catalyst preparation, the ZIS microstructure was modulated to sufficiently expose the active sites of the (110) edge for the HER, on which spontaneous interfacial engineering with an additional Ni cluster co-catalyst would be triggered via photodeposition in situ. The hydrogen production rate of the composite photocatalyst was excellent, at up to 26.80 mmol g-1 h-1 under simulated sunlight, which was 15.4 times greater than that of pristine ZIS. The optimized photocatalyst achieved a state-of-the-art apparent quantum yield of 61.68% at a single wavelength of 420 nm. Combined with systematic experimental characterization and density functional theory calculation, it was demonstrated that the separation and migration of charge carriers were significantly enhanced via the Ni cluster-induced interfacial electron redistribution, which contributed to the near-zero Gibbs free energy barrier and favored intermediate (*H) adsorption and desorption behavior, resulting in the superior photocatalytic performance. In summary, this work enables tuning of the interfacial electronic properties via spontaneous photodeposition of metallic cluster co-catalyst on the edge active sites, through which the separation of photogenerated charge carriers and surface redox reactions can be synergistically facilitated.

The three-dimensionally ordered microporous CaTiO3 coupling Zn0.3Cd0.7S quantum dots for simultaneously enhanced photocatalytic H2 production and glucose conversion

Glucose conversion assisted photocatalytic water splitting technology to simultaneously produce H₂ and high value-added chemicals is a promising method for alleviating the energy shortage and environmental crisis. In this work, we constructing type II heterojunction by in-situ coupling Zn_0.3Cd_0.7S quantum dots (ZCS QDs) on three-dimensionally ordered microporous CaTiO₃ (3DOM CTO) for photocatalytic H₂ production and glucose conversion. The DFT calculations demonstrate that substitution of Zn on the Cd site improves the separation and transmission of photogenerated carriers. Therefore, 3DOM CTO-ZCS composite exhibits best H₂ production performance (2.81 mmol g^-1h^-1) and highest apparent quantum efficiency (AQY) (5.56 %) at 365 nm, which are about 47 and 18 times that of CTO nanoparticles (NPs). The improved catalytic performance ascribed to not only good mass diffusion and exchange, highly efficient light harvesting of 3DOM structure, but also the efficient charges separation of type Ⅱ heterojunction. The investigation on photocatalytic mechanism indicates that the glucose is mainly converted to gluconic acid and lactic acid, and the control reaction step is gluconic acid to lactic acid. The selectivity for gluconic acid on 3DOM CTO-ZCS is 85.65 %. Our work here proposes a green sustainable method to achieve highly efficient H₂ production and selective conversion of glucose to gluconic acid.

Photocatalytic hydrogen evolution from glycerol-water mixture under visible light over zinc indium sulfide (ZnIn2S4) nanosheets grown on bismuth oxychloride (BiOCl) microplates

ZnIn₂S₄ (ZIS) is one of the widely studied photocatalyst for photocatalytic hydrogen evolution applications due to its prominent visible light response and strong reduction ability. However, its photocatalytic glycerol reforming performance for hydrogen evolution has never been reported. Herein, the visible light driven BiOCl@ZnIn₂S₄ (BiOCl@ZIS) composite was synthesized by growth of ZIS nanosheets on a template-like hydrothermally pre-prepared wide-band-gap BiOCl microplates using simple oil-bath method to be used for the first time for photocatalytic glycerol reforming for photocatalytic hydrogen evolution (PHE) under visible light irradiation (λ > 420 nm). The optimum amount of BiOCl microplates in the composite was found 4 wt% (4% BiOCl@ZIS) in the presence of in-situ 1 wt% Pt deposition. Then, the in-situ Pt photodeposition optimization studies over 4% BiOCl@ZIS composite showed the highest PHE rate of 674 μmol g^-1h^-1 with the ultra-low platinum amount (0.0625 wt%). The possible mechanisms behind this improvement can be ascribed to the formation of Bi₂S₃ low-band-gap semiconductor during BiOCl@ZIS composite synthesis resulting in Z-scheme charge transfer mechanism between ZIS and Bi₂S₃ upon visible light irradiation. This work expresses not only the photocatalytic glycerol reforming over ZIS photocatalyst but also a solid proof of the contribution of wide-band-gap BiOCl photocatalysts to enhancement of ZIS PHE performance under visible light.

Pollen Carbon-Based Rare-Earth Composite Material for Highly Efficient Photocatalytic Hydrogen Production from Ethanol-Water Mixtures

The unique electronic structure of rare-earth elements makes their modified semiconductor photocatalysts show great advantages in solar energy conversion. Herein, the pollen-like N, P self-doped biochar-based rare-earth composite catalyst (Er/LP-C) has been successfully synthesized, which combines the advantages of biochar and Er and is used for the first time in the field of photocatalytic hydrogen production from ethanol-water mixtures. Experimental results confirmed that the performance of photocatalytic hydrogen production under the full spectrum is up to 33.70 μmol/g in 6 h; this is due to the introduction of Er, which improves the carrier concentration, separation and transfer efficiency, and the driving force for the reduction reaction.