Comparative analysis of membrane fouling mechanisms induced by colloidal polymer: Effects of sodium and calcium ions

In-situ measurement of the internal compaction of a soft material caused by permeation flow

HYPOTHESIS

The compaction of hydrogel films under permeation flow can be measured, in-situ, by tracking the internal displacements of their structure, thereby revealing the internal deformation profile. Additionally, monitoring the permeation flow rate and applied pressure over time enables determination of variations in the hydrogel's permeability due to flow-induced compaction. Hydrogels are soft porous materials capable of containing high amounts of water within their polymeric matrix. Flow-induced internal deformation can modify the hydrogel's permeability and selectivity, which are important attributes in separation processes, both industrial (e.g., membrane-based water purification) and natural (mucous filters in suspension feeders and intestinal lining) systems. Measuring the flow-induced compaction in thin hydrogels films can reveal the interplay between flow and permeability. However, the micro-scale internal compaction remains uncharted for due to experimental challenges.

EXPERIMENTS

A technique is demonstrated for analyzing the compaction and stratification of permeable soft materials, in-situ, created by a pressure-driven permeation flow. To this end, the internal deformations within a soft material layer are calculated, based on tracking the positions of fluorescent micro-tracers that are embedded within the soft material. We showcase the capabilities of this technique by examining a hundred-micron-thick calcium-alginate cake deposited on a nanofiltration membrane, emphasizing the achieved micro-scale resolution of the local compaction measurements.

FINDINGS

The results highlight the possibility to examine thin hydrogel films and their internal deformation produced by flow-induced stresses when varying the flow conditions. The method enables the simultaneous calculation of the soft material's permeance, as the pressure-driven flow conditions are continuously monitored. In summary, the proposed method provides a powerful tool for characterizing the behaviour of permeable soft materials under permeation conditions, with potential applications in engineering, biophysics and material science.

Evaluation of Membrane Fouling Control for Brackish Water Treatment Using a Modified Polyamide Composite Nanofiltration Membrane

In northwest China, the limited amount of water resources are classified mostly as brackish water. Nanofiltration is a widely applied desalination technology used for brackish water treatment; however, membrane fouling restricts its application. Herein, we modified the membrane with triethanolamine (TEOA) and optimized the operating conditions (transmembrane pressure, temperature, and crossflow velocity) to control the nanofiltration membrane fouling by brackish water. Based on the physiochemical characteristics and desalination performance of the prepared membranes, the membrane modified with 2% TEOA (MPCM2) was identified as the optimal membrane, and 0.5 MPa, 25 °C, and 7 cm/s were identified as the optimal operating conditions through a series of nanofiltration experiments. Moreover, the membrane cleaning procedure for fouled MPCM2 was further determined, and a two-step cleaning procedure using ethylene diamine tetraacetic acid disodium followed by HCl with a permeance recovery rate of 98.77% was identified as the optimal cleaning procedure. Furthermore, the characterizations of the fouled and cleaned MPCM2 showed that the optimized cleaning procedure could recover the properties of MPCM2 to near virgin. This study is of great significance for the long-term stable operation of nanofiltration processes in brackish water treatment to ensure the supply of healthy water in the water-deficient areas of northwest China.

Discrepant effects of monovalent cations on membrane fouling induced by colloidal polymer: Evaluation and mechanism investigation

Understanding how ionic conditions affect membrane fouling induced by anionic polyacrylamide (APAM) is important for achieving long-term and stable operation of a polymer flooding produced wastewater (PFPW) membrane separation process. However, there is lack of studies on the effects of monovalent cations (Na⁺ and K⁺) on APAM-based membrane fouling. In this work, the effects of Na⁺ and K⁺ on filtration efficiency, flux decline behavior, fouling resistance, and cleaning efficiency were studied through a series of microfiltration tests. Moreover, the influencing mechanism of membrane fouling was further comprehensively revealed from the aspects of the extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory, the hydration force, and the microstructure characterizations. The XDLVO theory agreed well with membrane fouling behavior at various ionic strengths. The increase in ionic strength (0-10,000 mg/L) of Na⁺ and K⁺ exacerbated the reduction of relative flux (J/J₀) and the accumulation of fouling resistance, as well as made the porous APAM-induced fouling layer denser and more compact, boosting removal efficiency. Furthermore, K⁺ had a stronger aggravating effect on membrane fouling than Na⁺. Specifically, the final value of J/J₀ for APAM+K⁺ (0.08) was lower than that for APAM + Na⁺ (0.12), and the fouling resistance for APAM+K⁺ (12.25 × 10¹¹ m^-1) was higher than that for APAM + Na⁺ (12.01 × 10¹¹ m^-1) at an ionic strength of 10,000 mg/L, which was owing to the larger hydration force caused by Na⁺ with a smaller ionic radius. This research offers practical guidance for the PFPW membrane filtering process.