Rational construction of Ag3PO4/WO3 step-scheme heterojunction for enhanced solar-driven photocatalytic performance of O2 evolution and pollutant degradation

Boosted light absorption by WO3-x/Ag/PbS heterostructure for high-efficiency interfacial solar steam generation

Interfacial solar steam generation is considered a promising approach to address energy and drinking water shortages. However, designing efficient light-absorbing and photothermal-converting materials remains challenging. In this study, we describe a detailed method for synthesising a three-dimensional (3D) hierarchical oxygen defect-rich WO3/Ag/PbS/Ni foam (termed WO3-x/Ag/PbS/NF) composite to realise efficient exciton separation and enhanced photothermal conversion. The 3D heterogeneous ternary photothermal material combines the individual benefits of WO3-x, Ag and PbS, improving charge transfer and promoting photogenerated electron-hole pairs. This enhances light absorption and energy conversion. Theoretical calculations indicate that the increased photothermal conversion efficiency primarily results from the heterojunction between Ag, WO3-x and PbS, facilitating exciton separation and electron transfer. Consequently, the WO3-x/Ag/PbS/NF solar evaporator exhibits exceptional light absorption (98% within the sunlight spectrum), a high evaporation rate of 1.90 kg m-2h-1 under 1 sun and a light-to-heat conversion efficiency of 94%. The WO3-x/Ag/PbS/NF evaporator also exhibits excellent capabilities in seawater desalination and wastewater treatment. This approach introduces a synergistic concept for creating novel multifunctional light-absorbing materials suitable for various energy-related applications.

Construction of p-n-p nano heterojunction through coupling La2O3, (BiO)2CO3 and Ag3PO4 for effective photocatalytic degradation of doxycycline: Insights into mechanism, pathway and intermediate toxicity evaluation

The present work is centred around the development of La2O3/(BiO)2CO3/Ag3PO4 (LBA), a p-n-p nano-heterojunction to photodegrade doxycycline under visible light irradiation. Here, ultrasonication assisted co-precipitation method was employed to synthesize the photocatalyst. The photocatalyst was characterized using different analysis such as SEM, TEM, elemental mapping, XRD, XPS, FTIR, Raman, BET, DRS, PL and EIS which confirmed the successful fabrication of LBA and their excellent ability to refrain the e-/h+ recombination owing to the construction of the heterojunction. LBA was found to degrade DOX by 91.75 % with the high mineralization of 87.23%. The impact of the reaction parameters influencing the photodegradation process including the concentration of the NCs and DOX, pH and the influence of the commonly present anions were studied. The stability and reusability of the LBA was assessed through subjecting it to four cycles of photodegradation of DOX. In addition, the recovered LBA was characterized through XPS and XRD analysis to confirm the particles stability and reusability. The active participation of the photogenerated charges and the reactive oxygen species were identified through the scavenging assay and ESR analysis. Further, GC-MS/MS analysis was performed to put forward a plausible photodegradation pathway. The toxicity of the end products as well as the intermediates was predicted through ECOSAR software.

Enhanced visible light photocatalytic activity of octopod Ag3PO4 microcrystals with high index crystal faces

Novel octopod shaped Ag3PO4 microcrystals were successfully fabricated by a simple ion exchange method under the conditions of a hot water bath using [Ag(NH3)2]+ solution and Na2HPO4 solution as the precursors. Meanwhile, sphere and cube shaped Ag3PO4 microcrystals were also prepared followed by changing reaction materials as well as temperature. The surface morphology, microstructure and photocatalytic performance were investigated on the three different shaped crystals respectively. Compared to sphere and cube counterparts, the obtained octopod shaped Ag3PO4 crystals possess 8 symmetric feet with sharp tips and exhibit higher photocatalytic activity and better cycle stability. After further exploring its formation process, UV-vis diffusion reflectance properties as well as photocurrent transient response, it was found that the Ag3PO4 octopod had exposed high index crystal faces, and possessed a narrow band gap as well as high photoexcited transient charge separation efficiency. The results show that the improved photocatalytic activity of octopod shaped Ag3PO4 is mainly due to the synergistic action of the strong light absorption capacity and high carrier separation efficiency. These results highlight the tremendous practical application of octopod Ag3PO4 microcrystals in visible light photocatalysis.

Synthesis of Pr3+-doped WO3 particles: correlation between photoluminescent and photocatalytic properties

The WO3 and WO3:Pr3+ particles were successfully synthesized by the co-precipitation method. The XRD analysis with Rietveld refinement revealed the formation of a monoclinic phase for WO3 and for doped samples, this result was later confirmed by Raman spectroscopy studies. The presence of Pr3+ in the WO3 crystalline lattice induced structural and optical changes in the particles, increasing the crystallite size, distorting the clusters (shortening of the W-O bonds), favoring the crystallinity and changing the optical gap. The predominant morphology of the particles of WO3 and WO3:Pr3+ obtained was nanocubes constituted by the superposition of plates of nanometric thicknesses. The photoluminescence of WO3 and WO3:Pr3+ was produced by the existence of surface defects in the particles. The increase in the concentration of Pr3+ promoted an increase in the intensity of PL, due to the increase in the rate of recombination of electron/hole charges. The WO3 sample exhibited emission in the white region due to the adjustment of simultaneous electronic transitions in the blue, green and red regions, characteristic of the broadband spectrum. The interval of the 2.65 eV gap band and the high efficiency in the separation of the photogenerated charges (e-/h+) with the low recombination rate contributed to the photocatalytic degradation of Crystal Violet (CV) by the catalyst. The WO3:4% Pr3+ sample showed the best photocatalytic efficiency, degrading 73% of the CV dye in 80 minutes. This result was associated with a reduction in particle size and density of oxygen vacancies on the material surface.

Indium selenide/silver phosphate hollow microsphere S-scheme heterojunctions for photocatalytic hydrogen production with simultaneous degradation of tetracycline

Designing heterojunction photocatalysts with strong interfacial interactions is an effective way to reduce the recombination of photogenerated charge carriers. Here, silver phosphate (Ag₃PO₄) nanoparticles are coupled with hollow flower-like indium selenide (In₂Se₃) microspheres by a facile Ostwald ripening and in-situ growth method, resulting in the construction of In₂Se₃/Ag₃PO₄ hollow microsphere step-scheme (S-scheme) heterojunction with a large contact interface. The flower-like In₂Se₃ with hollow and porous structure provides a large specific surface area and numerous active sites for photocatalytic reactions to take place. The photocatalytic activity was tested by measuring the hydrogen evolution from antibiotic wastewater, and the H₂ evolution rate of In₂Se₃/Ag₃PO₄ reached 4206.4 µmol g^-1h^-1 under visible light, which is approximately 2.8 times greater than that of In₂Se₃. In addition, the amount of tetracycline (TC) degradation when it was used as a sacrificial agent is about 54.4% after 1 h. On the one hand, Se-P chemical bonds act as electron transfer channels in the S-scheme heterojunctions, which can facilitate the migration and separation of photogenerated charge carriers. On the other hand, the S-scheme heterojunctions can retain the useful holes and electrons with higher redox capacities, which is very favorable for the generation of more •OH radicals and the photocatalytic activity is greatly enhanced. This work provides an alternative design approach for photocatalysts toward hydrogen evolution in antibiotic wastewater.

Coupling Engineering of NH4 + Pre-Intercalation and Rich Oxygen Vacancies in Tunnel WO3 Toward Fast and Stable Rocking Chair Zinc-Ion Battery

Herein, for the first time, a pre-intercalated non-metal ion (NH₄ ⁺ ) with rich oxygen vacancies stabilized tunnel WO₃ is proposed as a new intercalation anode to construct Zn-metal-free rocking-chair ZIBs. With the ethylene glycol additive in the aqueous electrolyte, the Zn²⁺ solvation structure can be regulated and the side reaction of hydrogen evolution can also be suppressed. Owing to the integrated synergetic modification, a high-rate and ultra-stable aqueous Zn-(NH₄ )_x WO₃ battery can be constructed, which exhibits an improved specific capacity (153 mAh g^-1 at 0.1 A g^-1 ), excellent rate performance (when the current density increases to 3 A g^-1 , the specific capacitance is still 86 mAh g^-1 ), and a high cycle stability with 100% capacity retention after 2,200 cycles under 5 A g^-1 . Ex situ X-ray diffraction and XPS reveal the reversible insertion/extraction of Zn²⁺ in (NH₄ )_x WO₃ . The assembled (NH₄ )_x WO₃ //MnO₂ rocking-chair ZIBs delivers excellent capacity of 82 mAh g^-1 at 0.1 A g^-1 , impressive cyclic stability. Additionally, the flexible (NH₄ )_x WO₃ //MnO₂ ZIBs can power the electrochromic device-based PANI/WO₃ with high color contrast and fast response time. This study provides new insight for developing high-performance rechargeable aqueous ZIBs.

Constructing Z-Scheme 0D/2D TiO2 Nanoparticles/Bi2O3 Nanosheet Heterojunctions with Enhanced Visible Light Induced Photocatalytic Antibiotics Degradation and Hydrogen Evolution

Photocatalysis has been regarded as a promising technology for degrading organic pollutants in wastewater and producing hydrogen. In this paper, TiO2 nanoparticles (NPs) were synthesized to improve the visible light absorption of TiO2, which were further combined with Bi2O3 nanosheets to synthesize a series of 0D/2D TiO2 NPs/Bi2O3 nanosheet heterojunctions. The visible light induced photocatalytic activities of the as-synthesized TiO2/Bi2O3 heterojunctions were studied. The optimized catalyst TB-3 with 15 wt% of Bi2O3/TiO2 exhibited the best photocatalytic degradation of tetracycline hydrochloride (TC). The degradation rate constant k of TC over TB-3 was approximately eight times and 39 times greater than that of P25 and Bi2O3, respectively. Additionally, TB-3 showed the highest amount of hydrogen evolution, while that of Bi2O3 was almost zero. The enhancement of photocatalytic performances was ascribed to the improved visible light absorption and the Z-scheme charge transfer path of the TiO2/Bi2O3 heterojunctions, which enhanced the separation efficiency and reduced recombination of photogenerated charge carries, as evidenced by UV–Visible diffuse reflectance spectroscopy (DRS), photoluminescence spectroscopy (PL), and electrochemistry measurements. The active species trapping experiments and the electron spin resonance (ESR) results revealed that ·O2− was the main active substance in the photocatalytic degradation. The possible degradation pathway and intermediate products of TC have been proposed. This work provides experimental evidence supporting the construction of Z-scheme heterojunctions to achieve excellent visible light induced photocatalytic activity.

Research Progress of Tungsten Oxide-Based Catalysts in Photocatalytic Reactions

Photocatalysis technology is a potential solution to solve the problem of environmental pollution and energy shortage, but its wide application is limited by the low efficiency of solar energy conversion. As a non-toxic and inexpensive n-type semiconductor, WO3 can absorb approximately 12% of sunlight which is considered one of the most attractive photocatalytic candidates. However, the narrow light absorption range and the high recombination rate of photogenerated electrons and holes restrict the further development of WO3-based catalysts. Herein, the studies on preparation and modification methods such as doping element, regulating defects and constructing heterojunctions to enlarge the range of excitation light to the visible region and slow down the recombination of carriers on WO3-based catalysts so as to improve their photocatalytic performance are reviewed. The mechanism and application of WO3-based catalysts in the dissociation of water, the degradation of organic pollutants, as well as the hydrogen reduction of N2 and CO2 are emphatically investigated and discussed. It is clear that WO3-based catalysts will play a positive role in the field of future photocatalysis. This paper could also provide guidance for the rational design of other metallic oxide (MOx) catalysts for the increasing conversion efficiency of solar energy.

Enhancing Photocatalytic Antibiotics Mineralization and Water Oxidation via Constructing Interfacial Electric Field in Plate-on-Plate BiOCl/WO3 Photocatalysts

Two-dimensional materials and related plate-on-plate interfacial heterostructures offer great flexibility for integrating different atomic layers, providing an attractive scheme for the construction of built-in electric fields in photocatalysts. Here, we developed an interfacial engineering strategy to construct well-interfaced plate-on-plate BiOCl/WO₃ heterojunctions for general enhanced photocatalytic oxidation reactions. BiOCl/WO₃ heterojunctions exhibited significant enhancements in oxygen evolution and antibiotic degradation, with a rate of 9.5 times and 14.7 times higher than that of WO₃. This enhancement is attributed to the well lattice matching contact surface of WO₃ {020} plane with BiOCl {001} plane, which integrates a strong built-in electric field induced by Bi-O chemically bonds, providing atomically fast transport channels for electrons. These findings offer new guidelines for designing interfacial structures for high-performance oxidative photocatalysts and provide insights into the underlying interfacial carrier transport mechanisms.

Sunlight promoted self-fenton photodegradation and pathway of doxycycline: Interactive effects of nanomaterial on bean plant and its genotoxicity against Allium cepa

Photocatalytic induction of electron/hole recombination, surface property and light response ability effectively enhance the photocatalytic activity of nanomaterial. In this work, the effective charge carrier separating Sn/Mn-ZnFe₂O₄-CdFe₂O₄-Ag₃PO₄ Quantum dots (M/SZFO-CFO-AP QDs) was fabricated for photocatalytic degradation of doxycycline (doxy) antibiotic. The result showed enhanced photocatalytic activity of doxy and the degradation efficiency of doxy was about 98.8% in short span of time. The calculated WH plot and urbach energy of prepared photocatalyst exhibited evidence for the prevalence of point defects and its contribution to efficient charge separation and transferability. The total organic carbon (TOC) removal was found to be 98.9%, which depicts the complete mineralization of doxy. The synergetic charge transfer of n-p-n heterojunction enables the effective removal of doxy under visible light irradiation. Further, the genotoxicity study was determined by interacting the SZFO-CFO-AP QDs with Allium Cepa. The results depict that SZFO-CFO-AP QDs show lower toxicity level and there were no trace of defective mitotic phases and micro nuclei. Further, the progression and development of bean plant was determined after treating with prepared nanomaterials and the result showed the enhanced growth in SZFO-CFO-AP QDs treated bean plant compared to the counterparts. Therefore, the prepared SZFO-CFO-AP QDs was can be used as an environmental friendly photocatalyst for effective treatment of antibiotic present in the water bodies.

Highly Enhanced Photocatalytic Performances of Composites Consisting of Silver Phosphate and N-Doped Carbon Nanomesh for Oxytetracycline Degradation

Photocatalytic technology based on silver phosphate (Ag₃PO₄) has excellent potential in removing antibiotic pollutants, but the low separation rate of photogenerated hole-electron pairs restricts the application of the photocatalyst. In this study, it was found that the combination of nitrogen-doped carbon (NDC) with carbon defects and Ag₃PO₄ can significantly enhance the photocatalytic ability of Ag₃PO₄. After it was exposed to visible light for 5 min, the photocatalytic degradation efficiency of oxytetracycline (OTC) by the composite photocatalyst Ag₃PO₄@NDC could reach 100%. In addition, the structure of NDC, Ag₃PO_4, and Ag₃PO₄@NDC was systematically characterized by SEM, TEM, XRD, Raman, and EPR. The XPS results revealed intense interface interaction between Ag₃PO₄ and NDC, and electrons would transfer from Ag₃PO₄ to the NDC surface. A possible mechanism for enhancing the photocatalytic reaction of the Ag₃PO₄@NDC composite catalyst was proposed. This study provides a highly efficient visible light catalytic material, which can be a valuable reference for designing and developing a new highly efficient visible light catalyst.

A dual S-scheme TiO2@In2Se3@Ag3PO4 heterojunction for efficient photocatalytic CO2 reduction

The excellent photoresponse of semiconductors enables them to be promising photocatalysts for CO₂ reduction, but practical application is hampered by fast recombination of photogenerated carriers, low CO₂ capture capacity and poor stability. Herein, mesoporous hollow nanospheres of a dual S-scheme titanium dioxide@indium selenide@silver phosphate (TiO₂@In₂Se₃@Ag₃PO₄) heterojunction with a large specific surface area are designed and synthesized. The products of photocatalytic CO₂ reduction are CH₄, CH₃OH and CO with yields of 3.98, 4.32 and 8.2 μmol g^-1 h^-1, respectively, and the photocatalysts exhibit excellent cycle performance. The excellent photocatalytic performance is attributed to the large specific surface area of the samples and the construction of dual S-scheme heterojunctions. The large specific surface area can provide sufficient active sites for photocatalytic activity. Simultaneously, the built-in electric field (IEF) in the dual S-scheme exposed to light can facilitate the migration of photogenerated electrons from the CB of the oxidation photocatalyst (OP) to the VB of the reduction semiconductor (RP), where they recombine with the photogenerated holes on the VB of the RP, leaving behind photogenerated carriers with high redox ability for photocatalytic activity. This work provides new insights into the mechanism and design of highly efficient heterojunction photocatalysts for CO₂ reduction.