Layered Co doped MnO2 with abundant oxygen defects to boost aqueous zinc-ion storage

Regulating the zinc ion transport kinetics of Mn3O4 through copper doping towards high-capacity aqueous Zn-ion battery

High working voltage, large theoretical capacity and cheapness render Mn3O4 promising cathode candidate for aqueous zinc ion batteries (AZIBs). Unfortunately, poor electrochemical activity and bad structural stability lead to low capacity and unsatisfactory cycling performance. Herein, Mn3O4 material was fabricated through a facile precipitation reaction and divalent copper ions were introduced into the crystal framework, and ultra-small Cu-doped Mn3O4 nanocrystalline cathode materials with mixed valence states of Mn2+, Mn3+ and Mn4+ were obtained via post-calcination. The presence of Cu acts as structural stabilizer by partial substitution of Mn, as well as enhance the conductivity and reactivity of Mn3O4. Significantly, based on electrochemical investigations and ex-situ XPS characterization, a synergistic effect between copper and manganese was revealed in the Cu-doped Mn3O4, in which divalent Cu2+ can catalyze the transformation of Mn3+ and Mn4+ to divalent Mn2+, accompanied by the translation of Cu2+ to Cu0 and Cu+. Benefitting from the above advantages, the Mn3O4 cathode doped with moderate copper (abbreviated as CMO-2) delivers large discharge capacity of 352.9 mAh g-1 at 100 mA g-1, which is significantly better than Mn3O4 (only 247.8 mAh g-1). In addition, CMO-2 holds 203.3 mAh g-1 discharge capacity after 1000 cycles at 1 A g-1 with 98.6 % retention, and after 1000 cycles at 5 A g-1, it still performs decent discharge capacity of 104.2 mAh g-1. This work provides new ideas and approaches for constructing manganese-based AZIBs with long lifespan and high capacity.

Doping Engineering in Manganese Oxides for Aqueous Zinc-Ion Batteries

Manganese oxides (MnxOy) are considered a promising cathode material for aqueous zinc-ion batteries (AZIBs) due to their high theoretical specific capacity, various oxidation states and crystal phases, and environmental friendliness. Nevertheless, their practical application is limited by their intrinsic poor conductivity, structural deterioration, and manganese dissolution resulting from Jahn-Teller distortion. To address these problems, doping engineering is thought to be a favorable modification strategy to optimize the structure, chemistry, and composition of the material and boost the electrochemical performance. In this review, the latest progress on doped MnxOy-based cathodes for AZIBs has been systematically summarized. The contents of this review are as follows: (1) the classification of MnxOy-based cathodes; (2) the energy storage mechanisms of MnxOy-based cathodes; (3) the synthesis route and role of doping engineering in MnxOy-based cathodes; and (4) the doped MnxOy-based cathodes for AZIBs. Finally, the development trends of MnxOy-based cathodes and AZIBs are described.

Na0.4MnO2/MXene nanocomposites as cathodes for high-performance aqueous zinc-ion batteries

The distinctive configuration of MnO2 renders it an exceptionally promising candidate for cathode materials for aqueous zinc-ion batteries (ZIBs). However, its practical utilization is constrained by the sluggish diffusion kinetics of Zn2+ and the capacity degradation resulting from lattice distortions occurring during charge and discharge cycles. To address these challenges, Na0.4MnO2@MXene with a typical 2 × 4 tunnel structure has been successfully synthesized by a simple hydrothermal method in the presence of 5 M NaCl. The nanorods are about 56 nm in diameter. The zinc-ion batteries (ZIBs) with Na0.4MnO2@MXene displays a specific capacity of 324.6 mA h g-1 at 0.2 A g-1, and have a high reversible capacity of 153.8 mA h g-1 after 1000 charge-discharge cycles at 2 A g-1 with a capacity retention of 91.4%. The unique morphology endows abundant electrochemical active sites and facile ion diffusion kinetics, that contribute to the high specific capacity and stability. The Na0.4MnO2@MXene with a 2 × 4 tunnel structure is a promising candidate as an electrode material for ZIBs.

K-birnessite-MnO2/hollow mulberry-like carbon complexes with stabilized and superior rate performance for aqueous magnesium ion storage

Manganese oxides are commonly employed as a cathode for magnesium ion storage in aqueous magnesium ion hybrid supercapacitors (MHS). However, sluggish reaction kinetics still hinders their practical application. Herein, we designed K-birnessite-MnO2 and electrostatically spun mulberry-like carbon composites (K-MnO2/HMCs) via an in situ growth technique. Benefiting from the 3D conductive carbon network substrate, the in situ fabricated K-MnO2 exhibits more active sites and provides more interfacial contact area between the electrode material and the electrolyte. This improvement enhances its conductivity, facilitating the rapid transfer of electrons, diffusion of ions, and redox reactions. As a result, K-MnO2/HMC-based MHS achieves a specific capacity of 168 mA h g-1 at 0.5 A g-1, simultaneously exhibiting a superior energy density of 111.1 W h kg-1 at a power density of 505 W kg-1. Furthermore, it demonstrates excellent high rate performance and a long cycling life for aqueous magnesium ion storage, offering new insights for MHS applications.

Binder-free barium-implanted MnO2 nanosheets on carbon cloth for flexible zinc-ion batteries

The intrinsically low electrical conductivity and poor structural fragility of MnO2 have significantly hampered the zinc storage performance. In this work, Ba2+-implanted δ-MnO2 nanosheets have been hydrothermally grown on a carbon cloth (Ba-MnO2@CC) as an extremely stable and efficient cathode material of aqueous zinc-ion batteries. The three-dimensionally porous architecture composed of interwoven thin MnO2 nanosheets effectively shortens the electron/ion transport distances, enlarges the electrode/electrolyte contact area, and increases the active sites for the electrochemical reaction. Meanwhile, Ba2+ could function as an interlayer pillar to stabilize the crystal structure of MnO2. Consequently, the as-optimized Ba-MnO2@CC exhibits remarkable Zn2+ storage capabilities, such as a high capacity (305 mAh g-1 at 0.2 A g-1), prolonged lifespan (95% retention after a 200-cycling test), and superb rate capability. The binder-free cathode is also applicable for flexible energy storage devices with attractive properties. The present investigation provides important insights into designing advanced cathode materials toward wearable electronics.

Engineering work functions of cobalt-doped manganese oxide based electrocatalysts for highly efficient oxygen evolution reaction

The crystalline and electronic structures are two important factors for the design of electrocatalysts. In this work, Co-doped MnO electrocatalysts grown on nickel foam (NF) were prepared by a facile hydrothermal reaction, followed by H₂ treatment process. The electrocatalytic performance of MnO was significantly improved after doping with Co and the Co_0.1Mn_0.9O-NF sample achieved excellent oxygen evolution reaction (OER) performance with low overpotential (370 mV at 10 mA cm^-2) and reasonable Tafel slope (85.6 mV dec^-1). Significantly, the low work function was obtained in the Co_0.1Mn_0.9O-NF sample (4.37 eV), which could accelerate the charge transfer process of the OER activity. The excellent OER performance of the Co_0.1Mn_0.9O-NF sample is also attributed to the rich active sites, which improved electrical conductivity and enlarged electrochemical surface areas.