General metal-organic framework-derived strategy to synthesize yolk-shell carbon-encapsulated nickelic spheres for sodium-ion batteries

Metal Phosphide Anodes in Sodium-Ion Batteries: Latest Applications and Progress

Sodium-ion batteries (SIBs), as the next-generation high-performance electrochemical energy storage devices, have attracted widespread attention due to their cost-effectiveness and wide geographical distribution of sodium. As a crucial component of the structure of SIBs, the anode material plays a crucial role in determining its electrochemical performance. Significantly, metal phosphide exhibits remarkable application prospects as an anode material for SIBs because of its low redox potential and high theoretical capacity. However, due to volume expansion limitations and other factors, the rate and cycling performance of metal phosphides have gradually declined. To address these challenges, various viable solutions have been explored. In this paper, the recent research progress of metal phosphide materials for SIBs is systematically reviewed, including the synthesis strategy of metal phosphide, the storage mechanism of sodium ions, and the application of metal phosphide in electrochemical aspects. In addition, future challenges and opportunities based on current developments are presented.

Overcoming copper-induced conversion reactions in nickel disulphide anodes for sodium-ion batteries

Employing copper (Cu) as an anode current collector for metal sulphides is perceived as a general strategy to achieve stable cycle performance in sodium-ion batteries, despite the compatibility of the aluminium current collector with sodium at low voltages. The capacity retention is attributed to the formation of copper sulphide with the slow corrosion of the current collector during cycling which is not ideal. Conventional reports on metal sulphides demonstrate excellent electrochemical performances using excessive carbon coatings/additives, reducing the overall energy density of the cells and making it difficult to understand the underlying side reaction with Cu. In this report, the negative influence of the Cu current collector is demonstrated with in-house synthesised, scalable NiS2 nanoparticles without any carbon coating as opposed to previous works on NiS2 anodes. Ex situ TEM and XPS experiments revealed the formation of Cu2S, further to which various current collectors were employed for NiS2 anode to rule out the parasitic reaction and to understand the true performance of the material. Overall, this study proposes the utilisation of carbon-coated aluminium foil (C/Al) as a suitable current collector for high active material content NiS2 anodes and metal sulphides in general with minimal carbon contents as it remains completely inert during the cycling process. Using a C/Al current collector, the NiS2 anode exhibits stable cycling performance for 5000 cycles at 50 A g-1, maintaining a capacity of 238 mA h g-1 with a capacity decay rate of 8.47 × 10-3% per cycle.

Homologous Heterostructured NiS/NiS2 @C Hollow Ultrathin Microspheres with Interfacial Electron Redistribution for High-Performance Sodium Storage

Nickel sulfides with high theoretical capacity are considered as promising anode materials for sodium-ion batteries (SIBs); however, their intrinsic poor electric conductivity, large volume change during charging/discharging, and easy sulfur dissolution result in inferior electrochemical performance for sodium storage. Herein, a hierarchical hollow microsphere is assembled from heterostructured NiS/NiS2 nanoparticles confined by in situ carbon layer (H-NiS/NiS2 @C) via regulating the sulfidation temperature of the precursor Ni-MOFs. The morphology of ultrathin hollow spherical shells and confinement of in situ carbon layer to active materials provide rich channels for ion/electron transfer and alleviate the effects of volume change and agglomeration of the material. Consequently, the as-prepared H-NiS/NiS2 @C exhibit superb electrochemical properties, satisfactory initial specific capacity of 953.0 mA h g-1 at 0.1 A g-1 , excellent rate capability of 509.9 mA h g-1 at 2 A g-1 , and superior longtime cycling life with 433.4 mA h g-1 after 4500 cycles at 10 A g-1 . Density functional theory calculation shows that heterogenous interfaces with electron redistribution lead to charge transfer from NiS to NiS2 , and thus favor interfacial electron transport and reduce ion-diffusion barrier. This work provides an innovative idea for the synthesis of homologous heterostructures for high-efficiency SIB electrode materials.

Optimization of Sodium Storage Performance by Structure Engineering in Nickel-Cobalt-Sulfide

The development of high-performance electrode materials is crucial for the advancement of sodium ion batteries (SIBs), and NiCo2 S4 has been identified as a promising anode material due to its high theoretical capacity and abundant redox centers. However, its practical application in SIBs is hampered by issues such as severe volume variations and poor cycle stability. Herein, the Mn-doped NiCo2 S4 @graphene nanosheets (GNs) composite electrodes with hollow nanocages were designed using a structure engineering method to relieve the volume expansion and improve the transport kinetics and conductivity of the NiCo2 S4 electrode during cycling. Physical characterization and electrochemical tests, combined with density functional theory (DFT) calculations indicate that the resulting 3 % Mn-NCS@GNs electrode demonstrates excellent electrochemical performance (352.9 mAh g-1 at 200 mA g-1 after 200 cycles, and 315.3 mAh g-1 at 5000 mA g-1 ). This work provides a promising strategy for enhancing the sodium storage performance of metal sulfide electrodes.

Metal-Organic Framework Composites and Their Derivatives as Efficient Electrodes for Energy Storage Applications: Recent Progress and Future Perspectives

Metal-organic frameworks (MOFs) have been important electrochemical energy storage (EES) materials because of their rich species, large specific surface area, high porosity and rich active sites. Nevertheless, the poor conductivity, low mechanical and electrochemical stability of pristine MOFs have hindered their further applications. Although single component MOF derivatives have higher conductivity, self-aggregation often occurs during preparation. Composite design can overcome the shortcomings of MOFs and derivatives and create synergistic effects, resulting in improved electrochemical properties for EES. In this review, recent applications of MOF composites and derivatives as electrodes in different types of batteries and supercapacitors are critically discussed. The advantages, challenges, and future perspectives of MOF composites and derivatives have been given. This review may guide the development of high-performance MOF composites and derivatives in the field of EES.

MOFs for Electrochemical Energy Conversion and Storage

Metal organic frameworks (MOFs) are a family of crystalline porous materials which attracts much attention for their possible application in energy electrochemical conversion and storage devices due to their ordered structures characterized by large surface areas and the presence in selected cases of a redox-active porous skeleton. Their synthetic versatility and relevant host-guest chemistry make them suitable platform for use in stable and flexible conductive materials. In this review we summarize the most recent results obtained in this field, by analyzing the use of MOFs in fuel and solar cells with special emphasis on PEMFCs and PSCs, their application in supercapacitors and the employment in batteries by differentiating Li-, Na- and other metal ion-batteries. Finally, an overview of the water splitting reaction MOF-catalyzed is also reported.