In-situ formation of nanosized 1T-phase MoS2 in B-doped carbon nitride for high efficient visible-light-driven H2 production

Simultaneous removal of methylene blue and Cr(VI) in a dual-chamber photocatalytic microbial fuel cell with WO3/MoS2/FTO photocathode

Carbon felt was used as the anode and WO3/MoS2/FTO (fluorine-doped tin oxide) was used as the photocathode in a photocatalytic microbial fuel cell (PMFC). The photoelectric performance of the WO3/MoS2/FTO photocathode and the removal efficiency of methylene blue (MB) and Cr(VI) mixed pollutants were systematically investigated in the cathode chamber. The results showed that after 12 h of light irradiation in the PMFC with WO3/MoS2/FTO as the photocathode, the removal rates of MB and Cr(VI) were 84.56 and 68.11 %, respectively, which were much higher than those using WO3/FTO as a photocathode (55.57 % and 45.26 %, respectively). The corresponding maximum output power was 33.14 mW/m2, which was 1.85 times that of the WO3/FTO photocathode PMFC. These results can be attributed to the fact that WO3 is an n-type semiconductor and MoS2 is a p-type semiconductor. Analysis of trapping experiments showed that the composite of WO3 and MoS2 formed a Z-scheme heterojunction, which improved the separation efficiency of the photoelectric carriers and enhanced the pollutant removal efficiency of the photocathode. PMFCs are a new and environment-friendly technology for removing pollutants thereby providing an experimental basis for future engineering applications.

Molten salt synthesis of 1T/2H mixed phase MoS2 for boosting photocatalytic H2 evolution via Schottky junction under EY-sensitized system

Clean H2 fuel obtained from the photocatalytic water splitting to hydrogen reaction could efficiently alleviate current energy crisis and the concomitant environmental pollution problems. Therefore, it is desirable to search for a highly efficient photocatalytic system to decrease the energy barrier of water splitting reaction. Herein, the 1T/2H mixed phase MoS2 sample with Schottky junction between contact interfaces is developed through molten salt synthesis for photocatalytic hydrogen production under a dye-sensitized system (Eosin Y-TEOA-MoS2) driven by the visible light. In mixed phase MoS2 sample, the photogenerated electrons of 2H-phase MoS2 migrated to the 1T-phase MoS2 are difficult to jump back because of the existence of Schottky barrier, which greatly suppresses the quenching of EY and therefore results in an enhanced hydrogen evolution performance. Therefore, the optimized MoS2 sample (MoS2-350) has an initial hydrogen evolution rate of 213 μmol h-1 and corresponding apparent quantum yield of 36.1 % at 420 nm, far higher than those of pure Eosin Y. It is strongly confirmed by the steady-state/time-resolved photoluminescence (PL) spectra and transient photocurrent response experiments. With the assistance of Density functional theory (DFT) calculation, the function of Schottky junction in photocatalytic hydrogen evolution reaction is well explained. In addition, a new and universal method (SVM curve) of judging oxidation or reduction quenching for photosensitizers is proposed.

Augmented photocatalysis induced by 1T-MoS2 bridged 2D/2D MgIn2S4@1T/2H-MoS2 Z-scheme heterojunction: mechanistic insights into H2O2 and H2 evolution

In the realm of composite photocatalysts, the fusion of the co-catalyst effect with interfacial engineering is recognized as a potent strategy for facilitating the segregation and migration of photo-induced charge carriers. Herein, an innovative mediator-based Z-scheme hybrid, i.e. MIS@1T/2H-MoS2, has been well designed by pairing MIS with 1T/2H-MoS2via a facile hydrothermal strategy as a competent photocatalyst for H2O2 and H2 generation. The co-catalyst, i.e. metallic 1T-phase bridging between semiconducting 2H-MoS2 and MIS, serves as a solid state electron mediator in the heterostructure. Morphological findings revealed the growth of 1T/2H-MoS2 nanoflowers over MIS microflowers, verifying the close interaction between MIS and 1T/2H-MoS2. By virtue of accelerated e-/h+ pair separation and migration efficiency along with a proliferated density of active sites, the MMoS2-30 photocatalyst yields an optimum H2O2 of 35 μmol h-1 and H2 of 370 μmol h-1 (ACE of 5.9%), which is 3 and 2.7 fold higher than pristine MIS. This obvious enhancement can be attributed to photoluminescence and electrochemical aspects that substantiate the diminished charge transfer resistance along with improved charge carrier separation, representing a good example of a noble metal-free photocatalyst. The proposed Z-scheme charge transfer mechanism is aided by time-resolved photoluminescence (TRPL), XPS, radical trapping experiments, and EPR analysis. Overall, this endeavour provides advanced insights into the architecture of noble metal-free Z-scheme heterostructures, offering promising prospects in photocatalytic applications.

Facile fabrication of 3D hollow porous aminopyridine rings decorated polymeric carbon nitride for enhanced photocatalytic hydrogen evolution and dye elimination

In consideration of energy shortages and environmental pollution, there is a critical need to develop a photocatalyst with high catalytic performance for rapid hydrogen production and efficient pollutant degradation. We synthesized a photocatalytic composite catalyst with three-dimensional (3D) porous aminopyridine rings grafted on the edge of g-C3N4 (APCN) using melamine, cyanuric acid and 4-aminopyridine as raw materials. The composite catalyst exhibited excellent photocatalytic performance for H2 production (2.44 mmol g-1h-1) and RhB degradation (97.08%) under visible light. Subsequently, a possible enhanced mechanism of the catalyst was proposed on the basis of a series of characterization and photocatalytic experiments. The 3D porous structure not only enhanced the structural stability but also increased the surface area of the APCN catalysts, which generated more exposed active sites. Moreover, the aminopyridine ring embellishment was beneficial for achieving a narrowed bandgap and charge migration and separation, which decreased the occurrence of photogenerated carrier recombination. In summary, these two structural features showed a synergistic effect to enhance the photocatalytic performance of the APCN catalyst. Finally, an integrated feasible enhanced mechanism of photocatalytic activity was elucidated according to the results of active substance capture tests, showing that O2•- played an important role during RhB degradation.

Carbon nitride based Schottky junction with a Ni–Mo synergistic interaction for highly efficient photocatalytic hydrogen production

A CN/3NiMoP2 Schottky junction with a Ni–Mo synergistic interaction demonstrates a comparable photocatalytic HER performance to CN/3 wt% Pt and satisfactory stability.

Iron-doped g-C3N4 catalysts fabricated by forming Fe–N moieties with outstanding photo-Fenton activity toward tetracycline degradation

Porous Fe-doped g-C3N4 photo-Fenton catalysts are successfully prepared by a convenient one-step pyrolysis strategy and applied in the degradation of tetracycline hydrochloride.