A tube-like dual Z-scheme indium oxide@indium phosphide/cuprous oxide photocatalyst based on metal–organic framework for efficient CO2 reduction with water

Self-Assembled Perylene Diimide (PDI) Nanowire Sensitized In2O3@MgIn2S4 S-Scheme Heterojunction as Photoelectrochemical Biosensing Platform for the Detection of CA15-3

Inorganic/organic heterojunctions show promising applications as high-performance sensing platforms for photoelectrochemical (PEC) immunosensors. This work reports constructing a PEC biosensor for CA15-3 based on a self-assembled perylene diimide (PDI) nanowire sensitized In2O3@MgIn2S4 S-scheme heterojunction platform. P-type semiconductor Cu2O nanoparticles were designed as a signal burst source and were used as immunoassay labels. The carboxyl group on self-assembled PDI nanowires eliminates the step of additional surface functionalization for covalent immobilization of the capture elements. The π-π stacking of PDI enhances electron generation efficiency, while the carboxylic acid groups on PDI promote electron transfer. The performance of the constructed sensor was validated using CA15-3 as a model. The experimental results showed that the sensor based on In2O3@MgIn2S4/PDI has excellent selectivity, stability, and reproducibility, and can sensitively detect CA15-3 in the range of 0.001-100 U·mL-1 with the detection limit of 0.00056 U·mL-1. The sensor has a broad application prospect. It is hoped that this research work based on the unique advantages of the organic compound PDI will inspire other researchers to design light-responsive materials and promote the development of the field of photoelectrochemical sensing.

Decorating of 2D indium oxide onto 2D bismuth oxybromide to enhance internal electric field and stimulate artificial photosynthesis

CO2 photocatalytic reduction is an excellent strategy for promoting solar-to-chemical energy conversion and alleviating the severe environmental crisis. In this study, 2D indium oxide (IO) is decorated on 2D bismuth oxybromide (BOB) nanosheets to gain BOB/IO (BxIy) heterojunction. The optimal B3I1 composite affords a CO production rate of 54.2 μmol⋅g-1, about 2.2 times and 11.3 times higher than those of the pristine BOB and IO, respectively. The introduction of IO significantly enhances the internal electric field (IEF), leading to accelerated charge transfer and prolonged lifetime of the photogenerated carriers. In the BxIy composite, the BOB and IO serve as the electron acceptor and donor, respectively, facilitating the reduction of CO2 and oxidation of H2O. In-situ DRIFTs spectra are used to confirm the catalytic active sites and provide insights into the mechanism of CO2 photoreduction. The results suggest *COOH and *CO2- species played a crucial role in the formation of CO. This work presents a valuable perspective on understanding the charge transfer route and developing highly efficient photocatalysts for CO2 photoreduction.

Dual Z-scheme TCN/ZnS/ ZnIn2S4 with efficient separation for photocatalytic nitrogen fixation

The development of an efficient catalyst that can use solar energy for NH3 production is of great significance in solving the environmental and energy crisis caused by the traditional ammonia synthesis process. In this work, a dual Z-scheme tubular carbon nitride/zinc sulfide/zinc indium sulfide ternary composited photocatalyst (TCN/ZnS/ZnIn2S4) with excellent nitrogen photofixation performance under visible light was prepared by self-assembly and hydrothermal methods. The crystal structure studies confirmed that tubular carbon nitride (TCN) had more active sites that could promote N2 adsorption. The photochemical studies proved that the double charge transfer channel provided by the dual Z-scheme heterojunction could improve the efficiency of electron-hole separation and achieve excellent photocatalytic nitrogen fixation. The ammonia production rate of the TCN/ZnS/ZnIn2S4 catalyst was up to 136.56 μmol/L, and it also has good stability and reusability. This work provides new insight into the development of Z-scheme heterojunction photocatalysts with green and efficient nitrogen fixation.

In-modified Sn-MOFs with high catalytic performance in formate electrosynthesis from aqueous carbon dioxide

Electrochemical reduction of carbon dioxide (CO2ER) has become an effective solution to relieve the energy crisis and tackle climate change. In this study, a series of tin-based organic frameworks modified by In (Sn-MOF/Inx) were successfully synthesized via a simple hydrothermal method and explored for high formate-selective CO2ER. The pure Sn-MOF exhibits maximum formate selectivity with a faradaic efficiency (FEformate) of approximately 85.0% and a current density of 15 mA cm-2 at -1.16 VRHE, while the In (6%)-modified Sn-MOF (Sn-MOF/In6) delivers a much higher maximum FEformate (around 97.5%) and a current density of 16 mA cm-2 at -0.96 VRHE. Remarkably, the Sn-MOF/In6 exhibits a significantly larger specific surface area (183.3 m2 g-1) compared to the Sn-MOF (65.2 m2 g-1). These findings indicate that introducing In, an alien element with a slightly different outer orbital electron number from that of Sn, can significantly boost the selectivity and activity for CO2ER to formate. This study presents an efficient way to modify MOF catalysts through a well-designed introducing process.

Efficient Visible-Light Photocatalytic Hydrogen Evolution over the In2O3@Ni2P Heterojunction of an In-Based Metal-Organic Framework

Although the engineering of visible-light-driven photocatalysts with appropriate bandgap structures is beneficial for generating hydrogen (H₂), the construction of heterojunctions and energy band matching are extremely challenging. In this study, In₂O₃@Ni₂P (IO@NP) heterojunctions are attained by annealing MIL-68(In) and combining the resulting material with NP via a simple hydrothermal method. Visible-light photocatalysis experiments validate that the optimized IO@NP heterojunction exhibits a dramatically improved H₂ release rate of 2485.5 μmol g^-1 h^-1 of 92.4 times higher than that of IO. Optical characterization reveals that the doping of IO with an NP component promotes the rapid separation of photo-induced carriers and enables the capture of visible light. Moreover, the interfacial effects of the IO@NP heterojunction and synergistic interaction between IO and NP that arises through their close contact mean that plentiful active centers are available to reactants. Notably, eosin Y (EY) acts as a sacrificial photosensitizer and has a significant effect on the rate of H₂ generation under visible light irradiation, which is an aspect that needs further improvement. Overall, this study describes a feasible approach for synthesizing promising IO-based heterojunctions for use in practical photocatalysis.

Boosting the photocatalytic CO2 reduction reaction over BiOCl nanosheet via Cu modification

The development of photocatalytic reduction of CO₂ is hindered by slow surface reaction kinetics due to the high activation barrier of CO₂ and the lack of activation centers in the photocatalyst. To overcome these limitations, this study focuses on enhancing the photocatalytic performance through incorporating Cu atoms into BiOCl. By introducing a minute amount of Cu (0.18 wt%) into BiOCl nanosheets, significant improvements were achieved, with a CO yield of 38.3 µmol g^-1 from CO₂ reduction, surpassing that of pristine BiOCl by 50%. To explore the surface dynamics of CO₂ adsorption, activation and reactions, in situ DRIFTS was employed. Theoretical calculations were further performed to elucidate the role of Cu in the photocatalytic process. The results demonstrate that the incorporation of Cu into BiOCl induces surface charge redistribution, which facilitates efficient trapping of photogenerated electrons and accelerates the separation of photogenerated charge carriers. Furthermore, Cu modification on BiOCl effectively lowers the activation energy barrier by stabilizing the COOH* intermediate, thereby turning the rate-limiting step from COOH* formation to CO* desorption and boosting the CO₂ reduction process. This work unveils the atomic-level role of modified Cu in enhancing the CO₂ reduction reaction and presents a novel concept for achieving highly efficient photocatalysts.

Converting CO2 into Value-Added Products by Cu2 O-Based Catalysts: From Photocatalysis, Electrocatalysis to Photoelectrocatalysis

Converting CO₂ into value-added products by photocatalysis, electrocatalysis, and photoelectrocatalysis is a promising method to alleviate the global environmental problems and energy crisis. Among the semiconductor materials applied in CO₂ catalytic reduction, Cu₂ O has the advantages of abundant reserves, low price and environmental friendliness. Moreover, Cu₂ O has unique adsorption and activation properties for CO₂ , which is conducive to the generation of C₂₊ products through CC coupling. This review introduces the basic principles of CO₂ reduction and summarizes the pathways for the generation of C₁ , C₂ , and C₂₊ products. The factors affecting CO₂ reduction performance are further discussed from the perspective of the reaction environment, medium, and novel reactor design. Then, the properties of Cu₂ O-based catalysts in CO₂ reduction are summarized and several optimization strategies to enhance their stability and redox capacity are discussed. Subsequently, the application of Cu₂ O-based catalysts in photocatalytic, electrocatalytic, and photoelectrocatalytic CO₂ reduction is described. Finally, the opportunities, challenges and several research directions of Cu₂ O-based catalysts in the field of CO₂ catalytic reduction are presented, which is guidance for its wide application in the energy and environmental fields is provided.

Metal-organic frameworks in photocatalytic Z-scheme heterojunctions: an emerging technology

There is an urgent need for cleaner production processes for chemicals. An efficient and promising alternative for such reactions is heterogeneous photocatalysis, which works on the principle of converting (visible) light, including solar energy, into chemical energy. To that end, properly designed semiconductor based photocatalysts are necessary to trigger the photocatalytic reactions. Many commonly used photocatalysts have too large bandgaps (3-3.4 eV) to use visible light and a too low surface area for efficient production. Metal-organic frameworks (MOFs) have emerged as an encouraging class of materials for photocatalytic applications due to their (i) large surface area and porosity that facilitate adsorption towards chemicals, (ii) tunable crystallinity and optical and electronic properties for efficient light absorption in the visible region, (iii) tunable composition and functionality that make them versatile photocatalysts for a wide range of reactions, and (iv) facile development of composites with other semiconductors to produce Z-scheme heterojunctions that can effectively suppress the recombination of photogenerated charges. Ongoing research has started focusing on the judicious construction of Z-scheme heterojunctions in MOFs, to mimic natural photosynthesis, such that the MOF photocatalysts have higher light harvesting capacity, spatially separated reductive and oxidative active sites, and well-preserved redox ability. This review provides a concise compilation of the recent progress in the development and applications of MOF-based Z-scheme photocatalysts, their advanced characterization, and future perspectives for further advancements.