F, N neutralizing effect induced Co-P-O cleaving endows CoP nanosheets with superior HER and OER performances

Design and multilevel regulation of transition metal phosphides for efficient and industrial water electrolysis

Renewable energy electrolysis of water to produce hydrogen is an effective measure to break the energy dilemma. However, achieving activity and stability at a high current density is still a key problem in water electrolyzers. Transition metal phosphides (TMPs), with high activity and relative inexpensiveness, have become excellent candidates for the production of highly pure green hydrogen for industrial applications. In this mini-review, multilevel regulation strategies including nanoscale control, surface composition and interface structure design of high-performance TMPs for hydrogen evolution are systematically summarized. On this basis, in order to achieve large-scale hydrogen production in industry, the hydrogen evolution performance and stability of TMPs at a high current density are also discussed. Peculiarly, the practical application and requirements in proton exchange membrane (PEM) or anion exchange membrane (AEM) electrolyzers can guide the advanced design of regulatory strategies of TMPs for green hydrogen production from renewable energy. Finally, the challenges and prospects in the future development trend of TMPs for efficient and industrial water electrolysis are given.

Manipulating the Dynamic Self-Reconstruction of CoP Electrocatalyst Driven by Charge Transport and Ion Leaching

Surface reconstruction of electrocatalysts is very important to clarify the structure-component-activity relationship. In this work, in situ Raman and ex situ technologies are used to capture the surface structure evolution of F-Fe-CoP during the oxygen evolution reaction (OER). The results reveal that the leaching of F accelerates the dynamic reconstruction response of CoP to rapidly convert into active (oxy)hydroxide species. The further introduction of Fe can accelerate the charge transfer rate and alleviate the structural stacking caused by insufficient kinetics. The introduction of F and Fe increases the electron occupation states of cobalt sites and promotes the adsorption of OH- ions on the CoP catalyst, which significantly improves the OER performance. F-Fe-CoP exhibits excellent OER performance with an overpotential of 259 mV at 20 mA cm-2 . This finding enriches the OER mechanism associated with the surface reconstruction of CoP and provides a reference for the rational design of efficient electrocatalysts.

Amorphous and defective Co-P-O@NC ball-in-ball hollow structure for highly efficient electrocatalytic overall water splitting

Electrochemical water splitting using hollow and defect-rich catalysts has emerged as a promising strategy for efficient hydrogen production. However, the rational design and controllable synthesis of such catalysts with intricate morphology and composition present significant challenges. Herein, we propose a template-engaged approach to fabricate a novel ball-in-ball hollow structure of Co-P-O@N-doped carbon with abundant oxygen vacancies. The synthesis process involves the preparation of uniform cobalt-glycerate (Co-gly) polymer microspheres as precursors, followed by surface coating with ZIF-67 layer, adjustable chemical etching by phytic acid, and controllable pyrolysis at high temperature. The resulting ball-in-ball structure offers a large number of accessible active sites and high redox reaction centers, facilitating efficient charge transport, mass transfer, and gas evolution, which are beneficial for the acceleration of electrocatalytic reaction. Additionally, density functional theory (DFT) calculations indicate that the incorporation of oxygen and the presence of Co-P dangling bonds in CoP significantly enhance the adsorption of oxygenated species, leading to improved intrinsic electroactivity at the single-site level. As a sequence, the titled catalyst exhibits remarkable electrocatalytic activity and stability for water splitting in alkaline media. Notably, it only requires a low overpotential of 283 mV to achieve a current density of 10 mA cm^-2 for the oxygen evolution reaction. This work may provide some new insights into the design of complex hollow structures of phosphides with abundant defects for energy conversion.

Constructing interface engineering and tailoring a nanoflower-like FeP/CoP heterostructure for enhanced oxygen evolution reaction

The inexpensive and highly efficient electrocatalysts toward oxygen evolution reaction (OER) in water splitting electrolysis have displayed promising practical applications to relieve energy crisis. Herein, we prepared a high-yield and structurally regulated bimetallic cobalt-iron phosphide electrocatalyst by a facile one-pot hydrothermal reaction and subsequent low-temperature phosphating treatment. The tailoring of nanoscale morphology was achieved by varying the input ratio and phosphating temperature. Thus, an optimized FeP/CoP-1-350 sample with the ultra-thin nanosheets assembled into a nanoflower-like structure was obtained. FeP/CoP-1-350 heterostructure displayed remarkable activity toward the OER with a low overpotential of 276 mV at a current density of 10 mA cm^-2, and a low Tafel slope of only 37.71 mV dec^-1. Long-lasting durability and stability were maintained with the current with almost no obvious fluctuation. The enhanced OER activity was attributed to the presence of copious active sites from the ultra-thin nanosheets, the interface between CoP and FeP components, and the synergistic effect of Fe-Co elements in the FeP/CoP heterostructure. This study provides a feasible strategy to fabricate highly efficient and cost-effective bimetallic phosphide electrocatalysts.

Ultrafast synthesis of halogen-doped Ru-based electrocatalysts with electronic regulation for hydrogen generation in acidic and alkaline media

Developing a facile and time-saving method for preparing hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) electrocatalysts can accelerate the practical applications of hydrogen energy. In this study, halogen (X = F, Cl, Br and I) doped Ru-RuO₂ on carbon cloth (CC) (X-Ru-RuO₂/MCC) was synthesized via an ultrafast microwave-assisted method for 30 s. Particularly, the doped Br (Br-Ru-RuO₂/MCC) significantly improved the electrocatalytic performances of the catalyst through the regulation of electronic structures. Then, the Br-Ru-RuO₂/MCC catalyst featured HER overpotentials of 44 mV and 77 mV in 1.0 M KOH and 0.5 M H₂SO₄, and the OER overpotential of 300 mV at 10 mA cm^-2 in 1.0 M KOH. This study provides a novel method for developing of halogen-doped catalysts.

Tunable d-band center of a NiFeMo alloy with enlarged lattice strain enhancing the intrinsic catalytic activity for overall water-splitting

Developing efficient bifunctional electrocatalysts for the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) under alkaline conditions is prospective for reducing energy consumption during water electrolysis. In this work, we successfully synthesized nanocluster structure composites composed of NiFeMo alloys with controllable lattice strain by the electrodeposition method at room temperature. The unique structure of NiFeMo/SSM (stainless steel mesh) facilitates the exposure of abundant active sites and promotes mass transfer and gas exportation. The NiFeMo/SSM electrode exhibits a low overpotential of 86 mV at 10 mA cm^-2 for the HER and 318 mV at 50 mA cm^-2 for the OER, and the assembled device reveals a low voltage of 1.764 V at 50 mA cm^-2. Moreover, both the experimental results and theoretical calculations reveal that the dual doping of Mo and Fe can induce the tunable lattice strain of nickel, which in turn changes the d-band center and electronic interaction of the catalytically active site, and finally enhances the HER and OER catalytic activity. This work may provide more options for the design and preparation of bifunctional catalysts based on non-noble metals.

Coupled MoO3-x@CoP heterostructure as a pH-universal electrode for hydrogen generation at a high current density

Developing high-performance and low-cost self-supporting electrodes as pH-universal electrocatalysts for the hydrogen-evolution reaction (HER) and realizing high-quality hydrogen production at a high current density are highly desirable, but are hugely challenging. We created a self-supporting electrode with a coupled hierarchical heterostructure by simple electrodeposition followed by sulfurization. It comprised oxygen-deficient molybdenum oxide (MoO_3-x) and cobalt phosphide (CoP) on nickel foam (NF), which represented a highly active pH-universal electrocatalyst for the HER at a high current density. Benefiting from a plethora of catalytic active sites, improved interfacial charge transfer, and strong electronic interaction, this type of MoO_3-x@CoP/NF electrode delivered a superior catalytic performance. Overpotentials of only 100 mV, 135 mV, and 400 mV were needed to realize a high current density of 1 A cm^-2 in alkaline, acid and neutral media, respectively, which were superior to those of most other well-developed materials based on non-noble metals. Our experimental work demonstrates the synergistic advantages of a MoO_3-x@CoP heterostructure for improving the intrinsic catalytic performance but also paves a new path for the rational design of advanced electrodes for hydrogen generation in a wide range of pH conditions.

Triethanolamine-assisted synthesis of NiFe layered double hydroxide ultrathin nanosheets for efficient oxygen evolution reaction

Water electrolysis is a promising technique for producing high-quality hydrogen, the application of which is impeded by the sluggish oxygen evolution reaction (OER) process. In this study, ultrathin nickel-iron layered double hydroxide (NiFe LDH) nanosheets were successfully synthesized through a facile hydrothermal reaction with the assistance of triethanolamine (TEA). Morphological and structural characterizations revealed that the presence of TEA modified the morphology of NiFe LDH, facilitated the synthesis of high-purity NiFe LDH, improved the crystallinity of NiFe LDH and resulted in a slight decrease in specific surface area. X-ray photoelectron spectroscopy (XPS) analysis demonstrated the modulation of the electronic structure engendered by the addition of TEA, with nickel and iron appearing in high valence state in the resulting NiFe LDH nanosheets. The as-prepared NiFe LDH nanosheets possessed outstanding OER activity with fast kinetics, exhibiting a low overpotential of 261 mV to achieve a current density of 10 mA cm-2 and a small Tafel slope of 32.5 mV dec-1 in 1 M KOH. The excellent OER performance and rapid OER kinetics are mainly attributed to the high-valence Ni and Fe rather than the modification in the morphology and microstructure.

Surface engineering of carbon-coated cobalt-doped nickel phosphides bifunctional electrocatalyst for boosting 5-hydroxymethylfurfural oxidation coupled with hydrogen evolution

Multiple surface/interface engineering is an effective approach to develop efficient electrocatalysts for promoting the practical application of electrocatalysis and achieving carbon neutrality. Herein, a deep eutectic liquid precursor containing phosphorus was designed. The self-supported three-dimensional (3D) cobalt-doped Ni12P5/Ni3P nanowire networks coated with a thin layer of carbon (Co-NixP@C) were prepared by using an in-situ one-step pyrolysis method. The as-obtained Co-NixP@C hybrid possesses a superaerophobic/superhydrophilic surface, which could promote electrolyte diffusion and enhance bubble release. Density functional theory (DFT) calculations reveal that Co-doping in NixP@C can promote the adsorption and activation of 5-hydroxymethylfurfural (HMF) molecules, and optimize the energy barrier of H* absorption. The self-supported Co-NixP@C was used as an efficient bifunctional electrocatalyst for HMF oxidation coupled with hydrogen evolution reaction (HER) in a 1.0 M KOH solution. A nearly 100 % yield of 2,5-furandicarboxylic acid (FDCA) was achieved. The self-supported Co-NixP@C displayed high activity and stability for both HER and HMF conversion. The HMF oxidation coupled with HER can be efficiently driven by a 1.5 V commercial photovoltaic panel under sunlight. This study lays the foundation for large-scale industrialization in sustainable fine-chemical and energy engineering.