Manipulating the electrocatalytic activity of sulfur cathode via distinct cobalt sulfides as sulfur host materials in lithium-sulfur batteries

1T-rich MoS2 nanosheets anchored on conductive porous carbon as effective polysulfide promoters for lithium-sulfur batteries

The practical applications of lithium-sulfur (Li-S) batteries have severely been hindered by notorious shuttle effect and sluggish redox kinetics of lithium polysulfide intermediates (LiPSs), which bring about rapid capacity degradation, low coulombic efficiency and poor cycling stability. In this work, 1T-rich MoS2 nanosheets are in-situ developed onto the conductive porous carbon matrix (1T-rich MoS2@PC) as efficient polysulfide promotors for high-performance Li-S batteries. The porous carbon skeleton tightly anchors MoS2 nanosheets to prevent their reaggregation and ensures accessible electrical channels, and at the same time provides a favorable confined space that promotes the generation of 1T-rich MoS2 structure. More importantly, the uniformly distributed metallic 1T-rich MoS2 nanosheets not only affords rich sulfphilic sites and high binding energy for immobilizing LiPSs, but also favors rapid electron transfer and LiPSs conversation kinetics, substantially regulating sulfur chemistry in working cells. Consequently, the Li-S cell assembled with 1T-rich MoS2@PC modified separator delivers a remarkable cycling stability with ultralow capacity decay rate of 0.067% over 500 cycles at 1C. Encouragingly, under harsh conditions (high sulfur loading of 4.78 mg cm-2 and low E/S ratio of 8 μL mg-1), a favorable electrochemical performance can still be demonstrated. This study highlights the profitable design of 1T-rich MoS2/carbon based electrocatalyst for suppressing shuttle effect and promoting catalytic conversation of LiPSs, and has the potential to be applied to in other energy storage systems.

Sensitive electrochemical determination of quercetin and folic acid with cobalt nanoparticle functionalized multi-walled carbon nanotube

A nanocomposite of cobalt nanoparticle (CoNP) functionalized carbon nanotube (Co@CNT) was prepared and used to modify a glassy carbon electrode (Co@CNT/GCE). Characterization indicates the morphology of Co@CNT is CoNPs adhering on CNTs. With the nano-interface, Co@CNT provides large surface area, high catalytic activity, and efficient electron transfer, which makes Co@CNT/GCE exhibiting satisfactory electrochemical response toward quercetin (QC) and folic acid (FA). The optimum pH values for the detection of FA and QC are 7.0 and 3.0, respectively. The saturated absorption capacity (Γ*) and catalytic rate constant (kcat) of Co@CNT/GCE for QC and FA are calculated as 1.76 × 10-9, 3.94 × 10-10 mol∙cm-2 and 3.04 × 102, 0.569 × 102 M-1∙s-1. The linear range for both FA and QC is estimated to be 5.0 nM-10 μM, and the LODs (3σ/s) were 2.30 nM and 2.50 nM, respectively. The contents of FA and QC in real samples determined by Co@CNT/GCE are comparable with the results determined by HPLC. The recoveries were in the range 90.5 ~ 114% and the total RSD was lower than 8.67%, which further confirms the reliability of the proposed electrode for practical use.

Optimizing the intermediates adsorbability and revealing the dynamic reconstruction of Co6Fe3S8 solid solution for bifunctional water splitting

Co9S8 has been extensively studied as a promising catalyst for water electrolysis. Doping Co9S8 with Fe improves its oxygen evolution reaction (OER) performance by regulating the catalyst self-reconfigurability and enhancing the absorption capacity of OER intermediates. However, the poor alkaline hydrogen evolution reaction (HER) properties of Co9S8 limit its application in bifunctional water splitting. Herein, we combined Fe doping and sulfur vacancy engineering to synergistically enhance the bifunctional water-splitting performance of Co9S8. The as-synthesized Co6Fe3S8 catalyst exhibited excellent OER and HER characteristics with low overpotentials of 250 and 84 mV, respectively. It also resulted in the low Tafel slopes of 135 mV dec-1 for the OER and 114 mV dec-1 for the HER. A two-electrode electrolytic cell with Co6Fe3S8 used as both the cathode and anode produced a current density of 10 mA cm-2 at a low voltage of only 1.48 V, maintaining high stability for 100 h. The results of in/ex-situ experiments indicated that the OER process induced electrochemical reconfiguration, forming CoOOH/FeOOH active species on the catalyst surface to enhance its OER performance. Density functional theory (DFT) simulations revealed that Fe doping and the presence of unsaturated coordination metal sites in Co6Fe3S8 promoted H2O and H* adsorption for the HER. The findings of this study can help develop a strategy for designing highly efficient bifunctional water splitting electrocatalysts.

Porous FeNi Prussian blue cubes derived carbon-based phosphides as superior sulfur hosts for high-performance lithium-sulfur batteries

In contrast to lithium-ion batteries, lithium-sulfur batteries have higher theoretical energy density and lower cost, so they would become competitive in the practical application. However, the shuttle effect of polysulfides and slow oxidation-reduction kinetics can degrade their electrochemical performance and cycle life. In this work, we have first developed the porous FeNi Prussian blue cubes as precursors. The calcination in different atmospheres was employed to make precursors convert into common pyrolysis products or novel carbon-based phosphides, and sulfides, labeled as FeNiP/A-C, FeNiP/A-P, and FeNiP/A-S. When these products serve as host materials in the sulfur cathode, the electrochemical performance of lithium-sulfur batteries is in the order of S@FeNiP/A-P > S@FeNiP/A-S > S@FeNiP/A-C. Specifically, the initial discharge capacity of S@FeNiP/A-P can reach 679.1 mAh g-1at 1 C, and the capacity would maintain 594.6 mAh g-1after 300 cycles. That is because the combination of carbon-based porous structure and numerous well-dispersed Ni2P/Fe2P active sites contribute FeNiP/A-P to obtain larger lithium-ion diffusion, lower resistance, stronger chemisorption, and more excellent catalytic effect than other samples. This work may deliver that metal-organic framework-derived carbon-based phosphides are more suitable to serve as sulfur hosts than carbon-based sulfides or common pyrolysis products for enhancing Li-S batteries' performance.

Applications, prospects and challenges of metal borides in lithium sulfur batteries

Although the lithium-sulfur (Li-S) battery has a theoretical capacity of up to 1675 mA h g-1, its practical application is limited owing to some problems, such as the shuttle effect of soluble lithium polysulfides (LiPSs) and the growth of Li dendrites. It has been verified that some transition metal compounds exhibit strong polarity, good chemical adsorption and high electrocatalytic activities, which are beneficial for the rapid conversion of intermediate product in order to effectively inhibit the "shuttle effect". Remarkably, being different from other metal compounds, it is a significant characteristic that both metal and boron atoms of transition metal borides (TMBs) can bind to LiPSs, which have shown great potential in recent years. Here, for the first time, almost all existing studies on TMBs employed in Li-S cells are comprehensively summarized. We firstly clarify special structures and electronic features of metal borides to show their great potential, and then existing strategies to improve the electrochemical properties of TMBs are summarized and discussed in the focus sections, such as carbon-matrix construction, morphology control, heteroatomic doping, heterostructure formation, phase engineering, preparation techniques. Finally, the remaining challenges and perspectives are proposed to point out a direction for realizing high-energy and long-life Li-S batteries.

Reinforcing the Adsorption and Conversion of Polysulfides in Li-S Battery by Incorporating Molybdenum into MnS/MnO Nanorods

The Sabatier principle suggests that an excessive adsorption of lithium polysulfides (LiPSs) by metal compounds may hinder their conversion in the absence of a conversion module. Therefore, it is imperative to establish a synergetic effect mechanism between "strong adsorption" and "rapid conversion" for LiPSs. To achieve this coexistence, a molybdenum-doped MnS/MnO@C porous structure is designed as a multifunctional coating on the polypropylene (PP) separator. The incorporation of MnS/MnO@C enhances the adsorption capacity towards LiPSs, while molybdenum facilitates subsequent conversion. Benefiting from the synergistic effect of each component and its large specific surface area, the cell with Mo-doped MnS/MnO@C coating achieves smooth adsorption-diffusion-conversion processes and exhibits an appreciable rate performance with outstanding cycling stability. Even when sulfur loading increases to 9.68 mg cm-2 , the modified battery delivers an excellent initial areal capacity of 11.69 mAh cm-2 and maintains 6.97 mAh cm-2 after 50 cycles at 0.1 C. This study presents a promising approach to simultaneously accomplish "strong adsorption" and "rapid conversion" of polysulfides, offering novel perspectives for devising dual-functional modified separators.

Semi-Ionic C-F bond enabling fluorinated carbons rechargeable as Li-ion batteries cathodes

Fluorinated carbon (CF_x) cathodes possess the highest theoretical energy density among lithium primary batteries. However, achieving reversibility in CF_x remains a significant challenge. This work employs a high-voltage sulfolane electrolyte and achieves a highly reversible CF_x cathodes in lithium-ion batteries (LIBs) via fine modification of the C-F bond character. The improved reversibility of CF_x originates from the semi-ionic CF_x phase, with a superior bond length and weaker bond energy than a covalent bond. This characteristic significantly mitigates the challenges encountered during the charging process. We screen and identify the fluorinated graphene CF_1.12 as a suitable cathode, providing an appropriate fluorine content and sufficient semi-ionic C-F bonds for rechargeable LIBs. This fluorinated graphene CF_1.12 exhibits an initial discharge specific capacity of 814 mAh g^-1 and a reversible discharge specific capacity of 350 mAh g^-1. This work provides a new clue for chemical bond regulation studies and provides insights into stimulating reversibility of primary-cell cathodes.

Two-birds with one stone: Improving both cathode and anode electrochemical performances via two-dimensional Te-CoTe2/rGO ultrathin nanosheets as sulfur hosts in lithium-sulfur batteries

A Te-doped CoTe₂ film could be grown in situ on reduced graphene oxide (rGO) to develop a Te-CoTe₂/rGO composite with an ultrathin layered structure, which has multiple protective effects on both the sulfur positive electrode and lithium negative electrode in lithium sulfur (Li-S) batteries. The Te-CoTe₂/rGO composite as a sulfur host not only shows a strong adsorbing ability for lithium polysulfides (LiPSs) but can also accelerate the conversion reaction of active material sulfur during the charging/discharging process. More importantly, this host can turn the shuttle effect from an unfavorable factor to a favorable factor, which could improve the electrochemical performance of the lithium anode with uniform lithium plating/stripping resulting from the intermediate polytellurosulfide species (Li₂Te_xS_y), which could be generated on the cathode surface via Te reacting with soluble Li₂S_n (4 ≤ n ≤ 8). As a result, the S@Te-CoTe₂/rGO cathode shows a discharge capacity of 970.0 mA h g^-1 in the first cycle at 1 C and retains a high capacity of 545.5 mA h g^-1 after 1000 cycles, corresponding to a low capacity decay rate of only 0.043% per cycle. In addition, in situ X-ray diffraction (XRD) and in situ Raman were used to explore the sulfur conversion process. This study not only demonstrates that a two-dimensional (2D) ultrathin Te-CoTe₂/rGO composite is successfully developed with multiple effects on Li-S batteries but also opens a new pathway for designing unique sulfur hosts to promote the electrochemical performance of Li-S batteries.

The role of selenium vacancies functionalized mediator of bimetal (Co, Fe) selenide for high-energy-density lithium-sulfur batteries

Lithium-sulfur (Li-S) batteries are currently only in the basic research stage and have not been commercialized, which is mainly affected by the poor conductivity of sulfur/lithium sulfide (S/Li₂S), volume expansion effect of sulfur and the shuttle effect of lithium polysulfides (LiPSs). Herein, a three dimensional (3D) carbon nanotubes (CNTs) decorated cubic Co₉Se_8-x/FeSe_2-y (0 ＜ x ＜ 8, 0 ＜ y ＜ 2) composite (Co₉Se_8-x/FeSe_2-y@CNTs) is developed, and used as the functionalized mediator on polypropylene (PP) in Li-S batteries. Benefiting from the good electrical conductivity, large number of Se vacancies and the triple block/adsorption/catalytic effects of Co₉Se_8-x/FeSe_2-y@CNTs, the cell with Co₉Se_8-x/FeSe_2-y@CNTs//PP modified separator delivers a high reversible capacity (1103.5 mA h g^-1) at 1C after three cycles activation at 0.5C and remains 446 mA g h^-1 after 750 cycles with a 0.08% capacity decay rate each cycle. Moreover, at 0.2C, a high areal capacity of 3.63 mA h cm^-2 after 100 cycles with a high sulfur loading of 4.1 mg cm^-2 is obtained. The in-situ XRD tests revealing the transition path of α-S₈ → Li₂S → β-S₈ during the first charge-discharge process, then β-S₈ → Li₂S → β-S₈ conversion reaction in the next cycles, and firstly determine the sulfur-selenide active intermediates (Se_1.1S_6.9) during cycles. The work provides a new insight into the development of bimetallic selenide composites by defect engineering with highly adsorptive and catalytic properties for Li-S batteries.

Advance of Prussian Blue-Derived Nanohybrids in Energy Storage: Current Status and Perspective

Great changes have occurred in the energy storage area in recent years as a result of rapid economic expansion. People have conducted substantial research on sustainable energy conversion and storage systems in order to mitigate the looming energy crisis. As a result, developing energy storage materials is critical. Materials with an open frame structure are known as Prussian blue analogs (PBAs). Anode materials for oxides, sulfides, selenides, phosphides, borides, and carbides have been extensively explored as anode materials in the field of energy conversion and storage in recent years. The advantages and disadvantages of oxides, sulfides, selenides, phosphides, borides, carbides, and other elements, as well as experimental methodologies and electrochemical properties, are discussed in this work. The findings reveal that employing oxides, sulfides, selenides, phosphides, borides, and other electrode materials to overcome the problems of low conductivity, excessive material loss, and low specific volume is ineffective. Therefore, this review intends to address the issues of diverse energy storage materials by combining multiple technologies to manufacture battery materials with low cost, large capacity, and extended service life.

Polymetallic sulfide nanosheet arrays with composite structure as a highly efficient oxygen evolution electrocatalyst

Designing an earth-abundant and cost-effective electrocatalyst for oxygen evolution reaction (OER) is the crux to the hydrogen production by water electrolysis on industrial scale. Herein, we developed a trimetallic sulfide hybrid of CoS_1.097/Fe_1-xS/Ni₃S₂/NF nanoarrays by the combination of morphology optimization and interface modulation. The unique morphology of ultrathin nanosheets significantly enriches the reaction sites of the catalyst, while the abundant heterogeneous interfaces effectively regulate the local electron structure and thus intrinsically enhances the catalytic activity of the material. As a result, the catalyst delivers the superior OER performance with the ultralow overpotential of 229 mV at the current density of 50 mA cm^-2 and Tafel slope of 30.2 mV dec^-1. Furthermore, the current density of the material keeps constant for 50 h in 1.0 M KOH. This work proposes a strategy for the synthesis of polymetallic sulfide catalysts with composite structure as an efficient OER catalyst by morphology optimization and interface modulation.

Novel hydrothermal synthesis of Mn-TaS3@rGO nanocomposite as a superior multifunctional mediator for advanced Li-S batteries

Because of its high theoretical capacity and energy density, the lithium-sulfur (Li-S) battery is a desirable next-generation energy storage technology. However, the shuttle effect of lithium polysulfide and the slow sulfur reaction kinetics remain significant barriers to Li-S battery application. In this work, tantalum trisulfide (TaS₃) and selective manganese-doped tantalum trisulfide (Mn-TaS₃) nanocomposites on reduced graphene oxide surface were developed via a one-step hydrothermal method for the first time and introduced as a novel multifunctional mediator in the Li-S battery. The surface engineering of Mn-TaS₃@rGO with abundant defects not only exhibits the strong adsorption performance on lithium polysulfides (LiPSs) but also demonstrates the remarkable electrocatalytic effect on both the LiPSs conversion reaction in symmetric cell and the Li₂S nucleation/dissolution processes in potentiostatic experiments, which would substantially promote the electrochemical performance of LSB. The cell assembled with Mn-TaS₃@rGO/PP modified separator could significantly improve the cell conductivity and effectively accelerate the redox conversion of active sulfur during the charging/discharging process, which delivers exceptional long-term cycling with 683 mA h g^-1 retention capacity after the 1000th cycle at 0.3C under the sulfur loading of 2.7 mg cm^-2. Even at the E/S ratio as low as 5.0 µL mg^-1, the reversible specific capacity of 692 mA h g^-1 can be offered at 0.2C over 300 cycles. This research indicates that the novel Mn-TaS₃@rGO multifunctional mediator is successfully fabricated and applied in Li-S batteries with extraordinary electrochemical performances and gives a strategy to explore the construction of a modified functional separator.