A multi-dimensional hierarchical strategy building melamine sponge-derived tetrapod carbon supported cobalt-nickel tellurides 0D/3D nanohybrids for boosting hydrogen evolution and triiodide reduction reaction

Advances in Hierarchical Inorganic Nanostructures for Efficient Solar Energy Harvesting Systems

The urgent need to address the global energy and environmental crisis necessitates the development of efficient solar-power harvesting systems. Among the promising candidates, hierarchical inorganic nanostructures stand out due to their exceptional attributes, including a high specific surface area, abundant active sites, and tunable optoelectronic properties. In this comprehensive review, we delve into the fundamental principles underlying various solar energy harvesting technologies, including dye-sensitized solar cells (DSSCs), photocatalytic, photoelectrocatalytic (water splitting), and photothermal (water purification) systems, providing a foundational understanding of their operation. Thereafter, the discussion is focused on recent advancements in the synthesis, design, and development of hierarchical nanostructures composed of diverse inorganic material combinations, tailored for each of these solar energy harvesting systems. We meticulously elaborate on the distinct synthesis methods and conditions employed to fine-tune the morphological features of these hierarchical nanostructures. Furthermore, this review offers profound insights into critical aspects such as electron transfer mechanisms, band gap engineering, the creation of hetero-hybrid structures to optimize interface chemistry through diverse synthesis approaches, and precise adjustments of structural features. Beyond elucidating the scientific fundamentals, this review explores the large-scale applications of the aforementioned solar harvesting systems. Additionally, it addresses the existing challenges and outlines the prospects for achieving heightened solar-energy conversion efficiency.

Solar enhanced oxygen evolution reaction with transition metal telluride

The photo-enhanced electrocatalytic method of oxygen evolution reaction (OER) shows promise for enhancing the effectiveness of clear energy generation through water splitting by using renewable and sustainable source of energy. However, despite benefits of photoelectrocatalytic (PEC) water splitting, its uses are constrained by its low efficiency as a result of charge carrier recombination, a large overpotential, and sluggish reaction kinetics. Here, we illustrate that Nickel telluride (NiTe) synthesized by hydrothermal methods can function as an extremely effective photo-coupled electrochemical oxygen evolution reaction (POER) catalyst. In this study, NiTe was synthesized by hydrothermal method at 145°C within just an hour of reaction time. In dark conditions, the NiTe deposited on carbon cloth substrate shows a small oxygen evolution reaction overpotential (261 mV) at a current density of 10 mA cm-2, a reduced Tafel slope (65.4 mV dec-1), and negligible activity decay after 12 h of chronoamperometry. By virtue of its enhanced photo response, excellent light harvesting ability, and increased interfacial kinetics of charge separation, the NiTe electrode under simulated solar illumination displays exceptional photoelectrochemical performance exhibiting overpotential of 165 mV at current density of 10 mA cm-2, which is about 96 mV less than on dark conditions. In addition, Density Functional Theory investigations have been carried out on the NiTe surface, the results of which demonstrated a greater adsorption energy for intermediate -OH on the catalyst site. Since the -OH adsorption on the catalyst site correlates to catalyst activation, it indicates the facile electrocatalytic activity of NiTe owing to favorable catalyst activation. DFT calculations also revealed the facile charge density redistribution following intermediate -OH adsorption on the NiTe surface. This work demonstrates that arrays of NiTe elongated nanostructure are a promising option for both electrochemical and photoelectrocatalytic water oxidation and offers broad suggestions for developing effective PEC devices.

Two-birds with one stone: Improving both cathode and anode electrochemical performances via two-dimensional Te-CoTe2/rGO ultrathin nanosheets as sulfur hosts in lithium-sulfur batteries

A Te-doped CoTe₂ film could be grown in situ on reduced graphene oxide (rGO) to develop a Te-CoTe₂/rGO composite with an ultrathin layered structure, which has multiple protective effects on both the sulfur positive electrode and lithium negative electrode in lithium sulfur (Li-S) batteries. The Te-CoTe₂/rGO composite as a sulfur host not only shows a strong adsorbing ability for lithium polysulfides (LiPSs) but can also accelerate the conversion reaction of active material sulfur during the charging/discharging process. More importantly, this host can turn the shuttle effect from an unfavorable factor to a favorable factor, which could improve the electrochemical performance of the lithium anode with uniform lithium plating/stripping resulting from the intermediate polytellurosulfide species (Li₂Te_xS_y), which could be generated on the cathode surface via Te reacting with soluble Li₂S_n (4 ≤ n ≤ 8). As a result, the S@Te-CoTe₂/rGO cathode shows a discharge capacity of 970.0 mA h g^-1 in the first cycle at 1 C and retains a high capacity of 545.5 mA h g^-1 after 1000 cycles, corresponding to a low capacity decay rate of only 0.043% per cycle. In addition, in situ X-ray diffraction (XRD) and in situ Raman were used to explore the sulfur conversion process. This study not only demonstrates that a two-dimensional (2D) ultrathin Te-CoTe₂/rGO composite is successfully developed with multiple effects on Li-S batteries but also opens a new pathway for designing unique sulfur hosts to promote the electrochemical performance of Li-S batteries.

Niobium- and cobalt-modified dual-source-derived porous carbon with a honeycomb-like stable structure for supercapacitor and hydrogen evolution reaction

Designing porous carbon materials with tailored architecture and appropriate compositions is essential for supercapacitor (SC) and hydrogen evolution reaction (HER). Herein, Nb/Co-modified dual-source porous carbon (Nb/Co-DSPC) with a honeycomb structure was obtained by introducing a secondary carbon source (Co/Zn-ZIF) and transition metal Nb into activated Typha carbon (ATC). The addition of a secondary carbon source and Nb resulted in superior specific surface area (1272.38 m²/g), excellent hydrophilicity (34.73°) and abundant bimetallic active sites (Nb/Co-N_x) in Nb/Co-DSPC, providing excellent charge storage capacity and electrocatalytic activity. The Nb/Co-DSPC electrode displayed an outstanding capacitance of 337 F/g at 0.5 A/g and showed excellent stability after 15,000 charge-discharge cycles. In addition, Nb/Co-DSPC shows an overpotential of 114 mV at 10 mA cm^-2, better than those of Co-DSPC (139 mV) and ATC (162 mV) alone. This study offers a reliable strategy for advanced multifunctional porous carbon electrode materials preparations.

Defect engineering tuning electron structure of biphasic tungsten-based chalcogenide heterostructure improves its catalytic activity for hydrogen evolution and triiodide reduction

The design and exploration of high-efficiency and low-cost electrode catalysts are of great significance to the development of novel energy conversion technologies. In this work, metal and nonmetal heteroatoms co-doped biphasic tungsten-based chalcogenide heterostructured catalyst (Co-WS₂/P-WO_2.9) with rich defects is successfully synthesized by a vulcanization technique. The electrocatalytic performance of WS₂/WO₃ in the hydrogen evolution reaction (HER) and triiodide reduction reaction is significantly enhanced by modifying and optimizing its electronic structure through a defect engineering strategy. As an electrocatalyst for HER, the optimized Co-WS₂/P-WO_2.9 exhibits a low overpotential at 10 mA cm^-2 of 146 and 120 mV with small Tafel slopes of 86 and 74 mV dec^-1 in alkaline and acidic electrolyte, respectively. In addition, a Co-WS₂/P-WO_2.9 assembled solar cell yields a short circuit current density of 15.85 mA cm^-2, an open-circuit voltage of 0.74 V, a fill factor of 0.66, and a competitive power conversion efficiency (7.83%), which is comparable or higher than conventional Pt-based solar cell (16.02 mA cm^-2, 0.70 V, 0.63, 7.14%). The formation of a heterostructure in Co-WS₂/P-WO_2.9 leads to the presence of a built-in electric field in the interfacial region between Co-WS₂ and P-WO_2.9, which leads to an increased open-circuit voltage from 0.70 V for Pt to 0.74 V for Co-WS₂/P-WO_2.9. This work can provide a technical support for developing high-performance heterostructured catalysts, which open up a way for improving catalytic performance of heterostructured catalysts in the field of electrocatalysis.