Non-radical pathway dominated degradation of organic pollutants by nitrogen-doped microtube porous graphitic carbon derived from biomass for activating peroxymonosulfate: Performance, mechanism and environmental application

Enhancing photocatalytic CO2 reduction activity through Cobalt-Bismuth bimetallic Nanoparticle-Modified Nitrogen-Doped graphite carbon

Efficient charge transfer and effective separation of photo-generated charge carriers are crucial factors in photocatalysis. In this study, we present the design of a composite photocatalyst consisting of cobalt and bismuth (CoBi) bimetallic nanoparticles incorporated into a honeycomb nitrogen-doped graphitic carbon (N-GC) matrix. The ultra-thin porous N-GC matrix exhibits excellent electrical conductivity, a high number of active sites, and enables efficient absorption and multiple reflection of incident light. The CoBi bimetal-N-GC interface establishes a self-driven charge transport channel that effectively suppresses the backflow of photogenerated electrons, leading to prolonged separation of photo-generated carriers and a significant improvement in photocatalytic activity. The CoBi@N-GC catalyst showcases outstanding performance, producing CH4 and CO at rates of 36.07 μmol·g-1·h-1 and 44.09 μmol·g-1·h-1 respectively, confirming its superior photocatalytic capabilities.

Efficient degradation of tetracycline via peroxymonosulfate activation by phosphorus-doped biochar loaded with cobalt nanoparticles

The accumulation of tetracycline hydrochloride (TCH) threatens human health because of its potential biological toxicity. Carbon -based materials with easy isolation and excellent performance that can activate peroxymonosulfate (PMS) to generate reactive oxygen species for TCH degradation are essential, but the development of such materials remains a significant challenge. In this study, based on the idea of treating waste, tricobalt tetraoxide loaded P-doped biochar (Co NP-PBC) was synthesised to activate PMS for the degradation of TCH. Possible degradation pathways and intermediate products of TCH were identified using High performance liquid chromatography tandem mass spectrometry (HPLC-MS) detection and density functional theory analysis. Toxicity analysis software was used to predict the toxicity of the intermediate products. Compared to catalysts loaded with Fe and Mn and other Co-based catalysts, Co NP-PBC exhibited an optimal performance (with a kinetic constant of 0.157 min-1 for TCH degradation), and over 99.0% of TCH can be degraded within 20 min. This mechanism demonstrates that the non-free radical oxidation of 1O2 plays a major role in the degradation of TCH. This study provides insights into the purification of wastewater using BC-based catalysts.

Molten salt synthesis of porous graphene-like carbons as peroxydisulfate catalyst for the efficient removal of rhodamine B dye

Carbon materials have been receiving considerable attention as effective green catalysts for peroxydisulfate (PDS) activation to degrade organic pollutants. Herein, the porous graphene-like carbons (PGCs) were synthesized by pyrolyzing a nitrogen-rich biomass (peanut shell, PS) in the eutectic mixture of FeCl3 and ZnCl2. The results suggested that involvement of molten salts attributed the biochar the amazing properties such as high specific surface area (SBET = 2529.4 m2 g-1), abundant structural defects, high nitrogen content (6.5%), and oxygen-containing functional groups on its surface. Especially when pyrolyzed at activation temperature of 800 °C, mass ratio of 1:3:15 (PS:ZnCl2:FeCl3), and activation time of 2 h, the optimized PGCs-op exhibited outstanding performance in the catalytic degradation of rhodamine B (RhB). Almost all of RhB (99.02%) was removed in 40 min and basically not influenced by initial pH in the range of 3.00 to 9.98. Although the RhB degradation was influenced by anions (Cl-, HCO3-, HPO42-), the inhibition would be significantly alleviated within 120 min unless these substances were high in concentration. Furthermore, the quenching tests revealed that the reactive species were involved in RhB degradation in the sequence of 1O2 > O2∙-  > SO4∙-  > ∙OH, among which singlet oxygen played a crucial role. Combined with characterization analysis, a possible mechanism of RhB degradation in PGCs-op/PDS system was proposed. Overall, this study provided a promising metal-free catalyst for the removal of organic pollutants while achieving reutilization of the waste biomass.

Efficient benzo(a)pyrene degradation by coal gangue-based catalytic material for peroxymonosulfate activation

A low cost and green peroxymonosulfate (PMS) activation catalyst (CG-Ca-N) was successfully prepared with coal gangue (CG), calcium chloride, and melamine as activator. Under the optimal conditions, the CG-Ca-N can remove 100 % for benzo(a)pyrene (Bap) in an aqueous solution after 20 min and 72.06 % in soil slurry medium within 60 min, which also display excellent reuse ability toward Bap after three times. The removal of Bap is significantly decreased when the initial pH value was greater than 9 and obviously inhibited in the presence of HCO3- or SO42-. The characterization results indicated that the addition of calcium chloride could stabilize and increase the content of pyridinic N during thermal annealing, resulting in the production of •OH, SO4•- and 1O2. Based on electron paramagnetic resonance (EPR) and active radical scavenging experiments, 1O2 could be identified to be the dominant role in Bap degradation. Overall, this work opened a new perspective for the low cost and green PMS catalysts and offered great promise in the practical remediation of organic pollution of groundwater and soil.

FeS and Fe3O4 Co-modified biochar to build a highly resistant advanced oxidation process system for quinclorac degradation in irrigation water

Advanced oxidation processes (AOPs), based on sulfate radical (SO4·-) produced by peroxymonosulfate (PMS), can effectively mineralize refractory organic pollutants. However, the coexistence of anions and natural organic matters in actual wastewater prevents the application of AOPs. A simple one-step method was used to prepare FeS/Fe3O4 co-modified biochar materials (FFB) that could activate PMS to degrade quinclorac (QNC) with a removal rate of 100%, even exhibiting optimum degradation of QNC reached 99.31% in irrigation water, demonstrating excellent anti-interference performance for co-existing anions and natural organic matter. Meanwhile, ecotoxicity analysis showed that the toxicity of degradation intermediates was lower than that of QNC. Characterization results demonstrated the even distribution of FeS and Fe3O4 onto biochar, supplying abundant Fe2+ to activate PMS producing reactive oxygen species (ROS), while the generated Fe3+ after reactive continue to be reduced with sulfur species to promote the cycle of Fe2+/Fe3+. The coexistence of ·OH, SO4·-, 1O2, and O2·- in the FFB/PMS-QNC system suggest the possession of two pathway with free radical and non-free radical pathways to degrade QNC. The density functional theory (DFT) was used to analyze the adsorption sites and adsorption energy of PMS, as well as the differential charge density, which further proved the generation of SO4·-, O2·- and 1O2. In addition, the electrochemical test results showed that electron transfer also played an important role in the degradation of QNC. This study provides a feasible approach for the removal of organic pollutants in actual water.

pH adjustable MgAl@LDH-coated MOFs-derived Co2.25Mn0.75O4 for SMX degradation in PMS activated system

Sulfate radical-based advanced oxidation processes (SR-AOPs) is considered as one of the most promising technologies for antibiotic pollution. In this study, a core-shell catalyst of cobalt-manganese oxide derived from CoMn-MOFs coating by MgAl-LDH (Co/Mn@LDH) was synthesized for peroxymonosulfate (PMS) activation to degrade sulfamethoxazole (SMX). Degradation efficiency of nearly 100% and a mineralization efficiency of 68.3% for SMX were achieved in Co/Mn@LDH/PMS system. Mn species and out shell MgAl-LDH greatly suppressed the cobalt ions leaching, which only 23 μg/L Co ions were detected by ICP after the reaction. SO4·- was identified as dominant reactive species in the system. Furthermore, the possible reactive sites of SMX were predicted by the density functional theory (DFT) calculations. And the intermediates of SMX were detected by LC-MS and the degradation pathway was proposed based on the results above. The ECOSAR results suggested the intermediates of SMX showed a relatively low toxicity compared to SMX, indicating huge potential of utilization of Co/Mn@LDH in SR-AOPs system.

Carbon electrochemical membrane functionalized with flower cluster-like FeOOH catalyst for organic pollutants decontamination

Decorating active catalysts on the reactive electrochemical membrane (REM) is an effective way to further improve its decontamination performance. In this work, a novel carbon electrochemical membrane (FCM-30) was prepared through coating FeOOH nano catalyst on a low-cost coal-based carbon membrane (CM) through facile and green electrochemical deposition. Structural characterizations demonstrated that the FeOOH catalyst was successfully coated on CM, and it grew into a flower cluster-like morphology with abundant active sites when the deposition time was 30 min. The nano FeOOH flower clusters can obviously boost the hydrophilicity and electrochemical performance of FCM-30, which enhance its permeability and bisphenol A (BPA) removal efficiency during the electrochemical treatment. Effects of applied voltages, flow rates, electrolyte concentrations and water matrixes on BPA removal efficiency were investigated systematically. Under the operation condition of 2.0 V applied voltage and 2.0 mL·min^-1 flow rate, FCM-30 can achieve the high removal efficiency of 93.24% and 82.71% for BPA and chemical oxygen demand (COD) (71.01% and 54.89% for CM), respectively, with only a low energy consumption (EC) of 0.41 kWh·kgCOD^-1, which can be ascribed to the enhancement on OH yield and direct oxidation ability by the FeOOH catalyst. Moreover, this treatment system also exhibits good reusability and can be adopted on different water background as well as different pollutants.

Controlling methane emissions from Integrated Vertical-Flow Constructed Wetlands by using potassium peroxymonosulfate as oxidant

It is very important to control methane emissions to reduce global warming. In this study, a new attempt of one oxidant (potassium peroxymonosulfate (PMS)) was made to adjust the oxidation-reduction potential (Eh) by adding different mass of (0 g, 31.25 g, 62.5 g, 125 g, 250 g and 500 g) for the reduction of methane emissions from integrated vertical-flow constructed wetland (IVCW), where the IVCW system has been divided into the root-water system and the stem-leaf system of methane emissions. Results show that the reduced CH₄ emission from IVCW was the highest with decreased by 43.5% compared to blank group (PMS = 0), when adding 125 g PMS. Importantly, the reduced CH₄ from the root-water system of IVCW was higher than that of the stem-leaf system of IVCW, when adding PMS. It's found that Eh not only has a significant correlation with CH₄ flux, but also has a significant relationship between PMS quality, DO, water temperature and sampling time (y_Eh = -0.44X_PMS + 6.82X_DO + 0.38t - 264.1, R² = 0.99). It concludes that PMS, as an oxidant, is a very feasible method for controlling methane emissions from IVCW. It's concluded from this study that it is a feasible engineering method by using PMS as an oxidant for reducing methane emissions from IVCWs when treating artificial domestic sewage. Further research may combine other methods together such as microbiology, physical control and hydrology control for mitigating the CH₄ emissions from constructed wetlands for more types of wastewater.