Self-supported trimetallic NiZnLa nanosheets on hierarchical porous graphene oxide-polymer composite fibers for enhanced phosphate removal from water

Intertwined role of mechanism identification by DFT-XAFS and engineering considerations in the evolution of P adsorbents

Adsorption method exhibits promising potential in effectively removal of phosphate from wastewater, yet it faces tremendous challenges in practical application. Limited comprehension of adsorption mechanisms and the lack of evaluation method for scaling up application are the two main obstacles. To fully realize the practical application of P adsorbents, we reviewed advanced tools, including density functional theory (DFT) and/or X-ray absorption fine structure (XAFS) to elucidate mechanisms, underscored the significance of thermodynamics and kinetics in engineering design, and proposed strategies for regenerating and reusing P adsorbents. Specifically, we delved into the utilization of DFT and XAFS to gain insights into adsorption mechanisms, focusing on active site verification and molecular interaction configurations. Additionally, we explored precise calculation methods for adsorption thermodynamics and adsorption kinetics, encompassing thermodynamic equilibrium constants, reactor selection, and the regeneration, recovery, and disposal of P adsorbents. Our comprehensive review aims to serve as a guiding light in advancing the development of highly efficient P adsorbents for engineering applications.

Enhanced removal of phosphate from aqueous solutions by oxygen vacancy-rich MgO microspheres: Performance and mechanism

The efficient removal of phosphate from water environments was extremely significant to control eutrophication of water bodies and prevent further deterioration of water quality. In this study, oxygen vacancy-rich magnesium oxide (OV-MgO) microspheres were synthesized by a simple solvothermal method coupling high-temperature calcination. The effects of adsorbent dosage, contact time, initial pH and coexisting components on phosphate adsorption performance were examined. The physicochemical properties of OV-MgO microspheres and the phosphate removal mechanisms were analyzed by various characterization techniques. The maximum adsorption capacity predicted by the Sips isotherm model was 379.7 mg P/g for OV-MgO microspheres. The phosphate adsorption in this study had a fast adsorption kinetics and a high selectivity. OV-MgO microspheres had a good acid resistance for phosphate adsorption, but their adsorption capacity decreased under alkaline conditions. The electrostatic attraction, ligand exchange, surface precipitation, inner-sphere surface complexation and oxygen vacancy capture were mainly responsible for efficient removal of phosphate from aqueous solutions. This study probably promoted the development of oxygen vacancy-rich metal (hydr)oxides with potential application prospects.

Efficient Adsorption of Methylene Blue Using a Hierarchically Structured Metal-Organic Framework Derived from Layered Double Hydroxide

The growing concerns about environmental pollution, particularly water pollution, are causing an increasing alarm in modern society. One promising approach to address this issue involves engineering existing materials to enhance their effectiveness. A one-step solvothermal reconstruction approach was used to build an eco-friendly two-dimensional (2D) AlNiZn-LDH/BDC MOF composite. The characterizations confirm the formation of a metal-organic framework (MOF) at the layered double hydroxide (LDH) surface. The resulting synthesized material, 2D AlNiZn-LDH/BDC MOF, demonstrated remarkable efficacy in decontaminating methylene blue (MB), a model cationic dye found in water systems. The removal performance of 2D AlNiZn-LDH/BDC MOF was significantly higher than that of pristine 2D AlNiZn-LDH. This improvement shows the potential to increase the adsorption capabilities of nanoporous LDH materials by incorporating organic ligands and integrating meso-/microporosity through MOF formation on their surfaces. Furthermore, their kinetic, isothermal, and thermodynamic studies elucidated the adsorption behavior of this composite material. The results of synthesized MOF showed excellent removal efficiency (92.27%) of 10 ppm of MB aqueous solution as compared to pristine LDH. Additionally, the as-synthesized adsorbent could be regenerated for six successive cycles. This method holds promise for the synthesis of novel and highly effective materials to combat water pollution, laying the groundwork for potential advancements in diverse applications.

A karst-inspired hierarchical Mg/Al layered double hydroxide with a high entropy-driven process for interception and storage

Karstification plays a crucial role in forming magnificent scenery, and storing oil, natural gas, mineral resources, and water. Through the inspiration of karstification, a hierarchical layered double hydroxide (LDH) with funnel-like and cave-like structures (called Karst-LDH) is formed by the dissolution of acrylic acid/water solution. Meanwhile, the results of transmission electron microscopy (TEM) and scanning electron microscopy (SEM) show that Karst-LDH has complicated and interconnected internal pipe networks. The actual maximum phosphate adsorption capacity of Karst-LDH reaches 126.38 mg g-1 due to the unique structures, protonation, ligand exchange, ion exchange, and hydrogen bonding, which is over ten times that of general LDH with a regular hexagonal structure. The results of isotherms and thermodynamics also indicate that Karst-LDH conforms to more heterogeneous and multilayer adsorption with a higher entropy-driven process. Karst-LDH exhibits good selectivity for chloride and nitrate ions. The change in the frontier orbital interaction between phosphate and different LDHs is a significant reason for quick macropore transmission, mesopore interception, and finally, phosphate storage in Karst-LDH. This work provides an efficient way for the design and fabrication of high adsorption performance materials with unique karst-type structures, which can be used for multiple fields potentially.

Insights into the mechanism involved by electric double layer on phosphate removal of metal-bearing environmental remediation agent: Taking tricalcium aluminate as representative

Metal-bearing materials are known to be desirable environmental captures for phosphate removal, yet few studies focus on understanding the reaction process, especially formed a special phenomenon, i.e., electric double layer (EDL), which might influence the phosphate removal. To fill in this gap, we fabricated metal-bearing tricalcium aluminate (C₃A, Ca₃Al₂O₆) as representative, to remove phosphate and unveil the impact by electric double layer (EDL). Specifically, a preeminent removal capacity of 142.2 mg·g^-1 was achieved at the initial phosphate concentration below 300 mg·L^-1. Following thorough the characterizations, the process was that the released Ca²⁺ or Al³⁺ of C₃A formed positive charged stern layer attracted phosphate to generate Ca or Al-precipitation. At high phosphate concentration (>300 mg·L^-1), C₃A exhibited inferior removal capability for phosphate (<45 mg·g^-1), due to the aggregation of C₃A particles with low water permeability under the EDL effect, obstructing Ca²⁺ and Al³⁺ to release for phosphate removal. In addition, the feasibility application of C₃A was evaluated based on response surface methodology (RSM), highlighting its prospective phosphate treatment. This work not only provides a theoretical guidance for the application of C₃A to remove phosphate, but also deepens the understand of phosphate removal mechanism by metal-bearing materials, shedding light on environmental remediation.

Research Progress of Water Treatment Technology Based on Nanofiber Membranes

In the field of water purification, membrane separation technology plays a significant role. Electrospinning has emerged as a primary method to produce nanofiber membranes due to its straightforward, low cost, functional diversity, and process controllability. It is possible to flexibly control the structural characteristics of electrospun nanofiber membranes as well as carry out various membrane material combinations to make full use of their various properties, including high porosity, high selectivity, and microporous permeability to obtain high-performance water treatment membranes. These water separation membranes can satisfy the fast and efficient purification requirements in different water purification applications due to their high filtration efficiency. The current research on water treatment membranes is still focused on creating high-permeability membranes with outstanding selectivity, remarkable antifouling performance, superior physical and chemical performance, and long-term stability. This paper reviewed the preparation methods and properties of electrospun nanofiber membranes for water treatment in various fields, including microfiltration, ultrafiltration, nanofiltration, reverse osmosis, forward osmosis, and other special applications. Lastly, various antifouling technologies and research progress of water treatment membranes were discussed, and the future development direction of electrospun nanofiber membranes for water treatment was also presented.

Advanced Polymeric Nanocomposite Membranes for Water and Wastewater Treatment: A Comprehensive Review

Nanomaterials have been extensively used in polymer nanocomposite membranes due to the inclusion of unique features that enhance water and wastewater treatment performance. Compared to the pristine membranes, the incorporation of nanomodifiers not only improves membrane performance (water permeability, salt rejection, contaminant removal, selectivity), but also the intrinsic properties (hydrophilicity, porosity, antifouling properties, antimicrobial properties, mechanical, thermal, and chemical stability) of these membranes. This review focuses on applications of different types of nanomaterials: zero-dimensional (metal/metal oxide nanoparticles), one-dimensional (carbon nanotubes), two-dimensional (graphene and associated structures), and three-dimensional (zeolites and associated frameworks) nanomaterials combined with polymers towards novel polymeric nanocomposites for water and wastewater treatment applications. This review will show that combinations of nanomaterials and polymers impart enhanced features into the pristine membrane; however, the underlying issues associated with the modification processes and environmental impact of these membranes are less obvious. This review also highlights the utility of computational methods toward understanding the structural and functional properties of the membranes. Here, we highlight the fabrication methods, advantages, challenges, environmental impact, and future scope of these advanced polymeric nanocomposite membrane based systems for water and wastewater treatment applications.

Electrospinning of n-hemin/PAN Nanocomposite Membranes and Its Photo-Enhanced Enzyme-like Catalysis

Hemin possesses great potential in eliminating organic pollutants due to its mild reaction condition, light-harvesting efficiency, and environmental friendliness. However, it has drawbacks such as being easy to aggregate and hard to recycle, and poor stability should be improved in practical application. Herein, the subject developed an electrospinning approach to enable the hemin particulates to be immobilized onto polyacrylonitrile (PAN) nanofibers stably. Hydrogen peroxide (H₂O₂) was adopted as an oxidant in the system to simulate the enzymatic catalysis of hemin in an organism. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), UV-Vis diffuse reflection spectroscopy (DRS), and electron spin resonance spectroscopy (ESR) analysis was employed to discuss the morphology, structure, and mechanism of the prepared n-hemin/PAN nanocomposite membranes, and 0.02 mmol L^-1 of the rhodamine B (RhB) removal activity in different conditions was also verified with these membranes. The kinetic studies showed that n-hemin/PAN nanocomposite membranes maintained excellent properties both in adsorption and degradation. Around 42% RhB could be adsorbed in the dark, while 91% RhB decolorized under xenon lamp irradiation in 110 min, suggesting the catalytic performance of n-hemin/PAN was greatly driven by light irradiation. Differing from the axial coordinated hemin complexes, n-hemin/PAN would catalyze hydrogen peroxide into •OH radicals rather than •OOH and high-valent metal-oxo species. This work provides an effective way to support hemin as nanocomposite membranes, in which the molecular interaction between polymer and hemin made their light adsorption an obvious red shift.