Poly(azure C)-coated CoFe Prussian blue analogue nanocubes for high-energy asymmetric supercapacitors

Aniline tetramer conjugated N-doped graphene aerogel enabling efficient pH-universal aqueous supercapacitors

The development of novel negative electrode (anode) materials for efficient aqueous supercapacitors (SCs) remains appealing yet significantly challenging. Here we propose an aniline tetramer conjugated nitrogen-doped graphene aerogel (AT-NGA) as the anode material, exhibiting a maximum capacitance of 699.1F g-1 under 1 A/g in 1 M H2SO4 as well as a long lifespan of 6,000 cycles at all pH levels. In particular, its capacitive contribution is 94.1 %, superior to the best pseudocapacitive materials known. To evaluate its pH-universality, we assembled three asymmetric SCs, namely, AT-NGA//1 M H2SO4//graphene aerogel, AT-NGA//1 M Na2SO4//NaMnO2-x and AT-NGA//1 M KOH//NiCoFe layered double hydroxide. The acid device delivers maximal energy and power densities of 35.8 mWh g-1 and 13.0 W/g, the neutral device achieves a maximal energy and power densities of 71.8 mWh g-1 and 33.0 W/g, and the base device exhibits a maximal energy and power densities of 48.2 mWh g-1 and 18.0 W/g, respectively. All the SCs display an outstanding cycling performance over 5,000 cycles (especially, 96 % capacitance retention for the acidic device after 12,000 cycles). Our design can also be expanded to prepare other redox-active anode materials for efficient aqueous SC applications.

Longevous Protic Hybrid Supercapacitors Using Bimetallic Prussian Blue Analogue/rGO-Based Nanocomposite Against MXene Anode

MXenes exhibit a unique combination of properties-2D structure, high conductivity, exceptional capacity, and chemical resistance-making them promising candidates for hybrid supercapacitors (HSCs). However, the development of MXene-based HSCs is often hindered by the limited availability of cathode materials that deliver comparable electrochemical performance, especially in protic electrolytes. In this study, this challenge is addressed by introducing a durable protic HSC utilizing a bimetallic Prussian Blue Analogue (PBA) decorated on reduced graphene oxide (rGO) as a nanocomposite cathode paired with a single-layered Ti3C2Tx MXene (SL-MXene) anode. The bimetallic PBA, specifically nickel hexacyanocobaltate (NiHCC), is utilized by virtue of its open and stable structure that facilitates efficient charge storage, leading to enhanced stability and energy storage capabilities. The resulting NiHCC/rGO//SL-MXene cell demonstrates impressive performance, achieving a maximum specific energy of 38.03 Wh kg-1 and a power density of 20 666.67 W kg-1. Remarkably, the NiHCC/rGO//SL-MXene HSC cell also exhibits excellent cycling stability without any loss even after 15 000 cycles while retaining ≈100% coulombic efficiency. This work underscores the potential of bimetallic PBA materials with conductive rGO backbone for overcoming the limitations of current MXene-based protic HSCs, highlighting the significance of this work.

Enhancing supercapacitor electrochemical performance through acetate-ion intercalation in layered nickel-cobalt double hydroxides

Enhancing the performance of layered nickel-cobalt double hydroxides (NiCo-LDH) as electrode materials for supercapacitors represents a promising strategy for optimizing energy storage systems. However, the complexity of the preparation method for electrode materials with enhanced electrochemical performance and the inherent defects of nickel-cobalt LDH remain formidable challenges. In this study, we synthesized acetate-ion-intercalated NiCo-LDH (NCLA) through a simple one-step hydrothermal method. The physical and chemical structural properties and supercapacitor characteristics of the as-prepared NCLA were systematically characterized. The results indicated that the introduction of Ac- engendered a distinctive tetragonal crystal structure in NiCo-LDH, concomitant with a reduced interlayer spacing, thus enhancing structural stability. Electrochemical measurements revealed that NCLA-8 exhibited a specific capacitance of 1032.2 F g-1 at a current density of 1 A g-1 and a high specific capacitance of 922 F g-1 at 10 A g-1, demonstrating a rate performance of 89.3%. Furthermore, NCLA-8 was used to construct the positive electrode of an asymmetric supercapacitor, while the negative electrode was composed of activated carbon. This configuration resulted in an energy density of 67.7 Wh kg-1 at a power density of 800 W kg-1. Remarkably, the asymmetric supercapacitor retained 82.8% of its initial capacitance following 3000 charge-discharge cycles at a current density of 10 A g-1. Thus, this study demonstrates the efficacy of acetate-ion intercalation in enhancing the electrochemical performance of NiCo-LDH, establishing it as a viable electrode material for supercapacitors.

Self-healing and adhesive MXene-polypyrrole/silk fibroin/polyvinyl alcohol conductive hydrogels as wearable sensor

Conductive hydrogels become increasing attractive for flexible electronic devices and biosensors. However, challenges still remain in fabrication of flexible hydrogels with high electrical conductivity, self-healing capability and adhesion property. Herein, a conductive hydrogel (PSDM) was prepared by solution-gel method using MXene and dopamine modified polypyrrole as conductive enhanced materials, polyvinyl alcohol and silk fibroin as gel networks, and borax as cross-linking agent. Notably, the PSDM hydrogels not only showed high permeability (13.82 mg∙cm-2∙h-1), excellent stretch ability (1235 %), high electrical conductivity (11.3 S/m) and long-term stability, but also exhibited high adhesion performance and self-healing properties. PSDM hydrogels displayed outstanding sensing performance and durability for monitoring human activities including writing, finger bending and wrist bending. The PSDM hydrogel was made into wearable flexible electrodes and realized accurate, sensitive and reliable detection of human electromyographic and electrocardiographic signals. The sensor was also applied in human-computer interaction by collecting electromyography signals of different gestures for machine learning and gesture recognition. According to 480 groups of data collected, the recognition accuracy of gestures by the electrodes was close to 100 %, indicating that the PSDM hydrogel electrodes possessed excellent sensing performance for high precision data acquisition and human-computer interaction interface.

Unlocking the Potential of Amorphous Prussian Blue with Highly Active Mn Sites at Room Temperature for Impressive Oxygen Evolution Reaction and Super Capacitor Electrochemical Performance

The key to increasing the rate of oxygen evolution reaction (OER) lies in accelerated four-electron dynamics, while the key to facilitating the development of supercapacitors lies in the design of electrode materials. This paper synthesized manganese-iron Prussian blue (MnFe-PBA@IF) at room temperature, and hexagonal concave structures w ere prepared using a fast-reducing matrix. Interestingly, MnFe-PBA@IF has an amorphous structure favorable to exposing more active surfaces. According to Gibbs free energy calculations on MnFe-PBA, charge depletion of manganese atoms can greatly enhance the adsorption of electron-rich oxygen-containing groups on the surface. Furthermore, the overpotential in 1 m KOH is 280 mV. Also, it can be used as a supercapacitor with a stable operating voltage range of -0.9-0 V and a specific capacity of 1260 F g-1 . This work provides new insights into the synthesis of OER catalysts for Prussian blue ferromanganese at room temperature. Non-gold-bonded adsorption, highly active metal centers and active surfaces are the underlying reasons for the superior performance of supercapacitors. Therefore, Prussian blue with good energy storage performance and high active surface can be used as multifunctional energy storage and conversion electrodes.

Amorphous Co-Mo-S nanospheres fabricated via room-temperature vulcanization for asymmetric supercapacitors

Ternary metal sulfides employed in supercapacitors exhibit better electrochemical performances than their counterpart oxides due to their superior conductivity. However, the insertion/extraction of electrolyte ions can lead to a significant volume change in electrode materials, which can result in poor cycling stability. Herein, novel amorphous Co-Mo-S nanospheres were fabricated through a facile room-temperature vulcanization method. It involves the conversion of crystalline CoMoO4 by reacting it with Na2S at room temperature. In addition to the conversion of the crystalline state into an amorphous structure with more grain boundaries, which is beneficial for the transport of electron/ion and can accommodate the volume change generated by the insertion/extraction of electrolyte ions, the production of more pores led to an increased specific surface area. The electrochemical results indicate that the as-prepared amorphous Co-Mo-S nanospheres had a specific capacitance of up to 2049.7F/g@1 A/g together with good rate capability. The amorphous Co-Mo-S nanospheres can be used as the cathode of supercapacitors and assembled with an activated carbon anode into an asymmetric supercapacitor possessing a satisfactory energy density of 47.6 Wh kg-1@1012.9 W kg-1. One of the prominent features exhibited by this asymmetric device is its remarkable cyclic stability, with a capacitance retention of 107% after 10,000 cycles.

Prussian blue analog-derived nickel iron phosphide-reduced graphene oxide hybrid as an efficient catalyst for overall water electrolysis

Efficient and bifunctional nonprecious catalysts for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) are essential for the production of green hydrogen via water electrolysis. Transition metal (Ni, Co, Fe, etc.) phosphides are frequently documented HER catalysts, whereas their bimetallic oxides are efficient OER catalysts, thus enabling bifunctional catalysis for water electrolysis via proper operation. Herein, phosphide-reduced graphene oxide (rGO) hybrids were prepared from graphene oxide (GO)-incorporated bimetal Prussian blue analog (PBA) precursors. The hybrids could experience partial surface oxidation to create oxide layers with OER activities, and the hybrids also possessed considerable HER properties, therefore enabling bifunctional catalytic features for water electrolysis. The typical NiFeP-rGO hybrid demonstrated an overpotential of 250 mV at 10 mA cm^-2 and good durability for OER, as well as moderate HER catalytic features (overpotential of 165 mV at -10 mA cm^-2 and acceptable catalytic stability). Due to the bifunctional catalytic features, the NiFeP-rGO-based symmetric water electrolyzer demonstrated a moderate input voltage and high faradaic efficiency (FE) for O₂ and H₂ production. The current work provides a feasible way to prepare OER and HER bifunctional catalysts by facile phosphorization of PBA-associated precursors and spontaneous surface oxidation. Given the oxidation/reduction bifunctional catalytic behaviors, phosphide-rGO hybrid catalysts have great potential for widespread application in fields beyond water electrolysis, such as electrochemical pollution abatement, sensors, energy devices and organic syntheses.

In-situ polycondensate-coated cellulose nanofiber heterostructure for polylactic acid-based composites with superior mechanical and thermal properties

Renewable yet biodegradable natural fiber (e.g., cellulose nanofiber (CNF)) reinforced bio-based polymers (e.g., polylactic acid (PLA)) are being applied for the manufacture of clean packaging products. The interface incompatibility between hydrophilic CNF and hydrophobic PLA still restricts the promotion of high-performance bio-based products. Herein, a polycondensate-coated CNF hybrid, wherein silane, aluminate, and titanate coupling agent monomers were in-situ polymerized onto the CNF surface via dehydration self-condensation, was designed and further employed as strengthening/toughening nanofillers for fabricating the CNF-reinforced PLA composite. Results showed that the polycondensate coatings could efficiently promote the dispersion of CNFs and enhance interfacial compatibility between CNFs and PLA. Attributing to the synergistic effect of polycondensate coatings and CNFs, a considerable improvement in processing, mechanical and thermal properties was obtained in resultant CNF/PLA composites. With adding 2.5 wt% polycondensate-coated CNFs, the tensile strength, Young's modulus, and tensile toughness of CNF-reinforced PLA composites was raised by about 27 %, 51 % and 68 %, respectively; also, such composite possessed greater elasticity and higher melt strength than pure PLA. This study provides a novel interface control strategy to fabricate low-cost yet high-performance PLA-based composites for sustainable packaging application.