A novel all-organic microcapsule with excellent long-term antibacterial and anti-corrosion performances

Janus GO/BTA/PMMA Microcapsules for Biobased Self-Healing Anticorrosion Coatings with Ultrahigh Performance

The giant reduction of the barrier properties due to self-healing microcapsules and the lack of real-time protection during the healing remained the main challenges in self-healing anticorrosion coatings. Herein, a facile strategy using Janus graphene oxide (GO) as a dense and flexible shell has been proposed to synergistically solve these challenges. Benzotriazole (BTA) was used to synthesize Janus GO at the oil-water interface, and Janus GO/BTA/poly(methyl methacrylate) microcapsules were prepared. Energy-dispersive X-ray spectroscopy, Fourier infrared spectroscopy, Raman spectroscopy, and ultraviolet spectrophotometer analysis confirmed the formation of a Janus GO structure with one surface hydrophilic and the other hydrophobic. The surface morphology of J-GO-capsules with a high GO coverage rate was observed by scanning electron microscopy. The high biobased content coating containing J-GO-capsules showed a low-frequency impedance value above 1010 as assessed by electrochemical impedance spectroscopy after being immersed in 3.5 wt % NaCl solution for 60 days. In addition, the low-frequency impedance values of the coating were maintained after being scratched due to the self-healing properties of the J-GO-capsules as well as the real-time protective effect of the BTA. Biobased coatings with the best overall properties among all of the self-healing anticorrosion coatings were prepared.

Microencapsulation of multi-component traditional Chinese herbs extracts and its application to traditional Chinese medicines loaded textiles

Extracts of traditional Chinese herbs (TCH) contain a variety of anti-allergic, anti-inflammatory and other bioactive factors. However, the defect of easy degradation or loss of active ingredients limits its application in traditional Chinese medicines (TCM) loaded textiles. In this work, TCH extracts containing different active ingredients were innovatively proposed as the core material of microcapsules. The feasibility of microencapsulation of multi-component TCH extracts in the essential oil state was initially demonstrated. Polyacrylate was also used as a binder to load the microcapsules onto the fabric to improve the durability and wash resistance of the treated fabric. Modeling the oil release of microcapsules for controlled release under different conditions may provide new possible uses for the materials. Results show that the constructed microcapsule has a smooth surface without depression and can be continuously released for over 30 days. The release behavior of microcapsules follows different release mechanisms and can be modulated by temperature and water molecules. The incorporation of microcapsules and polyacrylate does not significantly change the fabric's air permeability, water vapor transmission and hydrophilicity. The washing durability and friction properties of the microcapsule-based fabric are greatly improved, and it can withstand 30 washing tests and 200 friction tests. Moreover, the results of methyl thiazolyl tetrazolium (MTT) release assay using human dermal papilla cells (HDP) as an in vitro template confirm that the microcapsule has no toxic effects on human cells. Therefore, the successful microencapsulation of multi-component TCH extracts indicates their potential application in the field of TCM-loaded textiles.

Preparation, Characterization, and Bioactivity Evaluation of Lambda-Cyhalothrin Microcapsules for Slow-Controlled Release System

The utilization of interfacial polymerization in the preparation of microcapsules with a slow-controlled release has been shown to effectively improve pesticide efficacy and reduce environmental pollution. In this study, polyurea microcapsules loaded with lambda-cyhalothrin were prepared by an interfacial polymerization method using modified isocyanate (MDI) as the wall material and GT-34 as the initiator. The microcapsules were fully characterized by optical microscopy, scanning electron microscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis, etc., and release behaviors were investigated. The results indicated that the microcapsules had a smooth surface and uniform distribution, the average particle size of the microcapsules was 1.97 μm, and the encapsulation efficiency of lambda-cyhalothrin microcapsules could reach 91.48%. Compared with other commercial formulations, the microcapsules exhibited an excellent sustained release property (>7 days) in a 50% acetonitrile aqueous solution (v/v). Subsequently, in vitro release studies showed that the lambda-cyhalothrin microcapsules could consistently control the release of the core materials at different pH, temperature, and MDI addition amount conditions. The release of lambda-cyhalothrin microcapsules was in accordance with the first-order model release, which was mainly by the Fickian diffusion mechanism. Furthermore, the biological activity on Myzus persicae showed that the microcapsules' persistence period was above 21 days, which was longer than that for the emulsifiable concentrate formulation.

Preparation of Antibacterial Nanosilver Solution Microcapsules and Their Impact on the Performance of Andoung Wood Surface Coating

In this paper, nanosilver solution was used as an antibacterial agent to prepare antibacterial microcapsules. The mass ratio of the core material to the wall material (Wcore: Wwall), the emulsifier’s hydrophilic–lipophilic balance (HLB) value, the mass ratio of ethanol to the emulsifier in solvent (Wcore: Wemulsion), and the rotational speed (r/min) were used to develop the four-factor, three-level orthogonal experiment, which was meant to investigate the most significant factors and the optimum process preparation parameters impacting the coating rate and yield of microcapsules. It was used to make an antibacterial coating that was applied to the surface paint film of a glass substrate and andoung wood, and it was mixed to the water-based primer with a content of 4%. Analyses of the mechanical, optical, and bactericidal characteristics were conducted. The micromorphology of the nanosilver solution microcapsules is influenced by the emulsifier’s HLB value. The color difference of the antibacterial coating film decreased with increasing emulsifier HLB value; however, the coating film’s gloss remained largely suitable. Additionally, the coating film’s transparency and tensile strength both decreased. It had minimal impact on the paint film’s surface hardness, but the adhesion and tensile strength showed a noticeable downward trend. The surface of the paint film was rough. Escherichia coli and Staphylococcus aureus were resistant to the antibacterial characteristics of the water-based primer film when it was combined with antibacterial nanosilver solution microcapsules by 80.7% and 74.55%, respectively. The coating film’s antibacterial properties were applied to the surface of the andoung wood, which were 75.7% and 71.0%, respectively, and somewhat decreased. In order to successfully inhibit bacteria, the nanosilver solution microcapsules were added to waterborne coatings. This ensures both the outstanding performance of the coating film and the effectiveness of the antibacterial effect. It expands the application prospects of antibacterial microcapsules in coatings.