Highly dispersed Co/Co9S8 nanoparticles encapsulated in S, N co-doped longan shell-derived hierarchical porous carbon for corrosion-resistant, waterproof high-performance microwave absorption

S-NiSe/HG Nanocomposites with Balanced Dielectric Loss Encapsulated in Room-Temperature Self-Healing Polyurethane for Microwave Absorption and Corrosion Protection

Exploring anticorrosion electromagnetic wave (EMW) absorbing materials in harsh conditions remains a challenge. Herein, S-NiSe/HG nanocomposites encapsulated in room-temperature self-healing polyurethane (S-NiSe/HG/SPU) were exploited as superior anticorrosion EMW absorbing materials. A dual-defect engineering collaborative Schottky interface construction endows S-NiSe/HG with a high vacancy concentration, abundant defects, and moderate conductivity. These structural merits synergistically balance dielectric loss by enhancing dipole-interface polarization loss and optimizing conduction loss. As a result, S-NiSe/HG demonstrates the optimal EMW absorption performance with a minimum reflection loss (RLmin) of -54.8 dB and an adequate absorption bandwidth (EAB) of 7.1 GHz. Besides, S-NiSe/HG/SPU combines the maze effect of S-NiSe/HG with the active repair capability of SPU, thereby providing long-term corrosion resistance for the Mg alloy. Even under corrosion for 10 days, S-NiSe/HG/SPU affords a low corrosion current density (1.3 × 10-5 A) and high charge transfer resistance (3796 Ω cm2). Overall, this work provides valuable insights for in-depth exploration of dielectric loss and development of multifunctional EMW-absorbing materials.

Heterostructure design of one-dimensional ZnO@CoNi/C multilayered nanorods for high-efficiency microwave absorption

Dimensional design and heterogeneous interface engineering are promising approaches for the fabrication of superior absorbers with high loss performance and a wide effective bandwidth. Therein, ZnO nanorods were successfully synthesized and combined with CoNi nanosheets by hydrothermal method, and PDA was then encapsulated on the surface of the material to form a unique one dimensional (1D) core-sheath structure. The extensive defects and residual functional groups are present in the calcined material, as well as the multiple heterogeneous interfaces enhance the dielectric loss induced by polarization. Simultaneously, the 1D structure wrapped with PDA offers an efficient pathway for electron transfer, hence facilitating the enhancement of conductive loss. In addition, the CoNi-LDHs sheet layer stacked on the surface not only causes multiple scattering and reflections of electromagnetic waves, but also provides magnetic losses to optimize the impedance matching. Finally, radar cross section (RCS) simulations further reveal that the composite can dissipate electromagnetic energy in practical applications. Consequently, the 1D multilayer ZnO@CoNi/C composite exhibits an optimal reflection loss of -55 dB with a thickness of 2.3 mm and an effective absorption bandwidth (EAB) value of 6.8 GHz when the filling ratio is only 20 wt%. In summary, this paper provides a new direction for the fabrication of 1D multilayer nonhomogeneous interfacial absorbers with excellent performance.

Bimetallic nanocubes embedded in biomass-derived porous carbon to construct magnetic/carbon dual-mechanism layered structures for efficient microwave absorption

Biomass-derived porous carbon materials have great potential for the development of lightweight and efficient broadband microwave absorbers. In this study, we reported the successful immobilization of Co3O4/CoFe2O4 nanocubes on porous carbon derived from ginkgo biloba shells by activated carbonization and electrostatic self-assembly processes. The optimal reflection loss value of the prepared BPC@Co3O4/CoFe2O4 reaches -68.5 dB when the filling load is 10 wt%, and the effective absorption bandwidth is 6.2 GHz with a matching thickness of 2 mm. The excellent microwave absorption (MA) performance is attributed to the rational three-dimensional structural design, the modulation of magnetic/carbon components, the optimized impedance matching, and the coordinated action of multiple mechanisms. It was further demonstrated by high-frequency structural simulation that the composite can effectively dissipate microwave energy in practical applications. Therefore, the results indicate a favorable potential of the synthesis and application of semiconductor/magnetic component/biomass-derived carbon microwave absorbing materials.

A novel plasma-sprayed Ti4O7/carbon nanotubes/Al2O3 coating with bifunctional microwave application

High-performance microwave absorption coatings are critically required in the stealth defense system of military platforms. Regrettably, just optimizing the property but neglecting the application feasibility seriously inhibits its practical application in the field of microwave absorption. To face this challenge, the Ti₄O₇/carbon nanotubes (CNTs)/Al₂O₃ coatings were successfully fabricated by a plasma-sprayed method. For the different oxygen vacancy-induced Ti₄O₇ coatings, the enhanced ε' and ε'' values in the frequency of X-band is due to the synergistic manipulation of conductive path, defects and interfacial polarization. The optimal reflection loss of Ti₄O₇/CNTs/Al₂O₃ sample (0 wt% CNTs) is -55.7 dB (8.9 GHz of 2.41 mm), while the electromagnetic interference shielding effectiveness of Ti₄O₇/CNTs/Al₂O₃ sample (5 wt% CNTs) increases to 20.5 dB as the enhanced electrical conductivity. In special, the flexural strength of Ti₄O₇/CNTs/Al₂O₃ coatings first increases from 48.59 MPa (0 wt% CNTs) to 67.13 MPa (2.5 wt% CNTs) and then decreases to 38.31 MPa (5 wt% CNTs), demonstrating that an appropriate amount of CNTs evenly dispersed in the Ti₄O₇/Al₂O₃ ceramic matrix can effectively play the role of CNTs as the strengthening phase of the coatings. This research will provide a strategy by tailoring synergistic effect of dielectric loss and conduction loss for oxygen vacancy-mediated Ti₄O₇ material to broaden the application of absorbing or shielding ceramic coatings.