Significantly enhanced photothermal catalytic CO2 reduction over TiO2/g-C3N4 composite with full spectrum solar light

Novel pyrochlore type europium stannate - tungsten disulfide heterostructure for light driven carbon dioxide reduction and nitrogen fixation

The reduction of carbon dioxide (CO2) and nitrogen (N2) to value-added products is a substantial area of research in the fields of sustainable chemistry and renewable energy that aims at reducing greenhouse gas emissions and the production of alternative fuels and chemicals. The current work deals with the synthesis of pyrochlore-type europium stannate (Eu2Sn2O7: EuSnO), tungsten disulfide (WS2:WS), and novel EuSnO/WS heterostructure by a simple and facile co-precipitation-aided hydrothermal method. Using different methods, the morphological and structural analyses of the prepared samples were characterized. It was confirmed that a heterostructure was formed between the cubic EuSnO and the layered WS. Synthesized materials were used for photocatalytic CO2 and N2 reduction under UV and visible light. The amount of CO and CH4 evolved due to CO2 reduction is high in EuSnO/WS (CO = 104, CH4 = 64 μmol h-1 g-1) compared to pure EuSnO (CO = 36, CH4 = 70 μmol h-1 g-1) and WS (CO = 22, CH4 = 1.8 μmol h-1 g-1) under visible light. The same trend was observed even in the N2 fixation reaction under visible light, and the amount of NH4+ produced was found to be 13, 26, and 41 μmol h-1 g-1 in the presence of WS, EuSnO and EuSnO/WS, respectively. Enhanced light-driven activity towards CO2 and N2 reduction reactions in EuSnO/WS is due to the efficient charge separation through the formation of type-II heterostructure, which is in part associated with photocurrent response, photoluminescence, and electrochemical impedence spectroscopic (EIS) results. The EuSnO/WS heterostructure's exceptional stability and reusability may pique the attention of pyrochlore-based composite materials in photocatalytic energy and environmental applications.

A review on titanium oxide nanoparticles modified metal-organic frameworks for effective CO2 conversion and efficient wastewater remediation

Environmental pollution has been increasing since last decade due to increasing industrialisation and urbanisation. Various kinds ofenvironmental pollutants including carbon dioxide (CO2), dyes, pharmaceuticals, phenols, heavy metals along with many organic and inorganic species have been discovered in the various environmental compartments which possess harmful impacts tox human health, wildlife, and ecosystems. Thus, various efforts have been made through regulations, technological advancements, and public awareness campaigns to reduce the impact of the pollution. However, finding suitable alternatives to mitigate their impacts remained a challenge. Metal-organic frameworks (MOFs) are one of the advanced materials with unique features such as high porosity and stability which exhibit versatile applications in environmental remediation. Their composites with titanium oxide nanoparticles (TiO2) have been discovered to offer potential feature such as light harvesting capacity and catalytic activity. The composite integration and properties have been confirmed through characterization using surface area analysis, scanning electron/transmission electron microscopy, atomic force microscopy, fourier transformed infrared spectroscopy, X-ray diffraction analysis, X-ray photoelectron spectroscopy, thermogravimetric analysis, and others. Thus, this work rigorously discussed potential applications of the MOF@TiO2 nanomaterials for the CO2 capture and effective utilization in methanol, ethanol, acetone, acetaldehyde, and other useful products that served as fuel to various industrial processes. Additionally, the work highlights the effective performance of the materials towards photocatalytic degradation of both organic and inorganic pollutants with indepth mechanistic insights. The article will offer significant contribution for the development of sustainable and efficient technologies for the environmental monitoring and pollution mitigation.

Nickel selenide/g-C3N4 heterojunction photocatalyst promotes CC coupling for photocatalytic CO2 reduction to ethane

Photocatalytic CO2 reduction to generate high value-added and renewable chemicals is of great potential in facilitating the realization of closed-loop and carbon-neutral hydrogen economy. Stabilizing and accelerating the formation of COCO* intermediate is crucial to achieve high-selectivity ethane production. Herein, a novel 3D/2D NiSe2/g-C3N4 heterostructure that mesoscale hedgehog nickel selenide (NiSe2) grown on the ultrathin g-C3N4 nanosheets were synthesized via a successively high temperature calcination process and in-situ thermal injection method for the first time. The optimum 2.7 % NiSe2/g-C3N4 heterostructure achieved moderate C2H6 generation rate of 46.1 μmol·g-1·h-1 and selectivity of 97.5 % without any additional photosensitizers and sacrificial agents under light illumination. Based on the results of the theoretical calculations and experiments, the improvement of photocatalytic CO2 to C2H6 production and selectivity should be ascribed to the increased visible light absorption ability, unique 3D/2D heterostructures with promoted adsorption of CO2 molecules on the Ni active sites, the type II heterojunction with improved charge transfer dynamics and lowered interfacial transfer resistance, as well as the formation of COCO* key intermediate. This work provides an inspiration to construct efficient photocatalysts for the direct transformation of CO2 to multicarbon products (C2+).

Coal fly ash and bottom ash low-cost feedstocks for CO2 reduction using the adsorption and catalysis processes

Combustion of fossil fuels, industry and agriculture sectors are considered as the largest emitters of carbon dioxide. In fact, the emission of CO2 greenhouse gas has been considerably intensified during the last two decades, resulting in global warming and inducing variety of adverse health effects on human and environment. Calling for effective and green feedstocks to remove CO2, low-cost materials such as coal ashes "wastes-to-materials", have been considered among the interesting candidates of CO2 capture technologies. On the other hand, several techniques employing coal ashes as inorganic supports (e.g., catalytic reduction, photocatalysis, gas conversion, ceramic filter, gas scrubbing, adsorption, etc.) have been widely applied to reduce CO2. These processes are among the most efficient solutions utilized by industrialists and scientists to produce clean energy from CO2 and limit its continuous emission into the atmosphere. Herein, we review the recent trends and advancements in the applications of coal ashes including coal fly ash and bottom ash as low-cost wastes to reduce CO2 concentration through adsorption and catalysis processes. The chemical routes of structural modification and characterization of coal ash-based feedstocks are discussed in details. The adsorption and catalytic performance of the coal ashes derivatives towards CO2 selective reduction to CH4 are also described. The main objective of this review is to highlight the excellent capacity of coal fly ash and bottom ash to capture and selective conversion of CO2 to methane, with the aim of minimizing coal ashes disposal and their storage costs. From a practical view of point, the needs of developing new advanced technologies and recycling strategies might be urgent in the near future to efficient make use of coal ashes as new cleaner materials for CO2 remediation purposes, which favourably affects the rate of global warming.

Synthesis of AgBr/Ti3C2@TiO2 ternary composite for photocatalytic dehydrogenation of 1,4-dihydropyridine and photocatalytic degradation of tetracycline hydrochloride

In this work, AgBr/Ti₃C₂@TiO₂ ternary composite photocatalyst was prepared by a solvothermal and precipitation method with the aims of introducing Ti₃C₂ as a cocatalyst and TiO₂ as a compositing semiconductor. The crystal structure, morphology, elemental state, functional groups and photoelectrochemical properties were studied by XRD, SEM, TEM, XPS, FI-IR and EIS. The photocatalytic performances of the composites were investigated by the photodehydrogenation of diethyl 1,4-dihydro-2,6-dimethyl-3,5-pyridinedicarboxylate (1,4-DHP) and the photodegradation of tetracycline hydrochloride (TCH) under visible light irradiation (λ > 400 nm). The AgBr/Ti₃C₂@TiO₂ composite photocatalyst showed enhanced photocatalytic performance in both photocatalytic reactions. The photocatalytic activity of the composite photocatalyst is dependent on the proportional content of Ti₃C₂@TiO₂. With optimized Ti₃C₂@TiO₂ proportion, the photocatalytic ability of the AgBr/Ti₃C₂@TiO₂ composite was 24.5 times as high as that of Ti₃C₂@TiO₂ for photodehydrogenation of 1,4-DHP and 1.9 times as high as that of pure AgBr for photodegradation of TCH. The enhanced photocatalytic performance of the AgBr/Ti₃C₂@TiO₂ composite should be due to the formation of a p-n heterojunction structure between AgBr and Ti₃C₂@TiO₂ and the excellent electronic properties of Ti₃C₂, which enhanced the visible light absorption capacity, lowered the internal resistance, speeded up the charge transfer and reduced the recombination efficiency of photo-generated carriers. Mechanism studies showed that superoxide free radical (˙O₂^-) was the main active species. In addition, the composite photocatalyst also displayed good stability, indicating its reutilization in practical application.