Engineering the highly efficient heterogeneous catalyst based on PdCu nanoalloy and nitrogen-doped Ti(3)C(2)T(x) MXene for ethanol electrooxidation

MXene Electrocatalysts: Transformative Approaches in Hydrogen Production with Alternative Anode Reactions

Water electrolyzer is crucial for producing clean hydrogen, but the traditional approach faces challenges owing to the oxygen evolution reaction (OER) slow kinetics at the anode. Hybrid water splitting replaces the OER with the oxidation of an organic molecule to enhance hydrogen production along with value-added products. The scarcity of affordable and highly effective catalysts remains a major challenge. MXene, a 2D nanomaterial, has gained substantial attention for its enviable properties, for instance high conductivity, hydrophilicity, and substantial surface area. This review discusses experimental methods for synthesizing MXene and MXene-based nanocomposites. Furthermore, the small molecules oxidation such as benzyl alcohol, methanol, ethanol, urea, hydrazine, furfural, and formic acid as alternatives to the oxygen evolution reaction is examined. Finally, an understanding of imminent research and the development of MXene-associated materials in electrocatalytic applications are presented.

Modification Strategies for Development of 2D Material-Based Electrocatalysts for Alcohol Oxidation Reaction

2D materials, such as graphene, MXenes (metal carbides and nitrides), graphdiyne (GDY), layered double hydroxides, and black phosphorus, are widely used as electrocatalyst supports for alcohol oxidation reactions (AORs) owing to their large surface area and unique 2D charge transport channels. Furthermore, the development of highly efficient electrocatalysts for AORs via tuning the structure of 2D support materials has recently become a hot area. This article provides a critical review on modification strategies to develop 2D material-based electrocatalysts for AOR. First, the principles and influencing factors of electrocatalytic oxidation of alcohols (such as methanol and ethanol) are introduced. Second, surface molecular functionalization, heteroatom doping, and composite hybridization are deeply discussed as the modification strategies to improve 2D material catalyst supports for AORs. Finally, the challenges and perspectives of 2D material-based electrocatalysts for AORs are outlined. This review will promote further efforts in the development of electrocatalysts for AORs.

High-efficient electrooxidation of ethylene glycol and ethanol on PdSn alloy loaded by versatile poly(3,4-ethylenedioxythiophene)

Developing a novel catalyst with lower noble-metal loading and higher catalytic efficiency is significant for promoting the widespread application of direct alcohol fuel cells (DAFCs). In this work, poly(3,4-ethylenedioxythiophene) (PEDOT) supported the PdSn alloy (PdSn/PEDOT) were simply synthesized and their electrocatalytic performance toward the oxidation of ethylene glycol and ethanol (EGOR and EOR) were investigated in alkaline media, respectively. In comparison with other control catalysts, the optimized Pd4Sn6/PEDOT catalyst exhibits the highest mass activity (7125/4166 mA mgPd-1) and specific activity (26/15 mA cm-2) towards EGOR/EOR. The mass activity of Pd4Sn6/PEDOT for EGOR and EOR are 11.9 and 10.9 times higher than commercial Pd/C, respectively. Moreover, chronoamperometry (CA) and successive cyclic voltammetry (CV) tests show that the CO resistance ability and durability of the Pd4Sn6/PEDOT catalyst were superior to Pd4Sn6, Pd/PEDOT and commercial Pd/C catalysts, which can be attributed to the d-band center of Pd can be effectively downshifted and the interface strain effect between electrons caused by the conjugated structure between PEDOT groups. This work provides an effective strategy for the development of highly efficient anode catalysts of DAFCs.

Rational Design and Facile Preparation of Palladium-Based Electrocatalysts for Small Molecules Oxidation

Direct liquid fuel cells (DLFCs) can convert the chemical energy of small organic molecules directly into electrical energy, which is a promising technique and always calls for electrocatalysts with high activity, stability and selectivity. Palladium (Pd)-based catalysts for DLFCs have been widely studied with the pursuit of ultra-high performance, however, most of the preparation routes require complex agents, multi-operation steps, even extreme experimental conditions, which are high-cost, energy-consuming, and not conducive to the scalable and sustainable production of catalysts. In this review, the recent progresses on not only the rational design strategies, but also the facile preparation methods of Pd-based electrocatalysts for small molecules oxidation reaction (SMOR) are comprehensively summarized. Based on the principles of green chemistry in material synthesis, the basic rules of "facile method" have been restricted, and the fabrication processes, perks and drawbacks, as well as practical applications of the "real" facile methods have been highlighted. The landscape of this review is to facilitate the mild preparation of efficient Pd-based electrocatalysts for SMOR, that is, to achieve a balance between "facile preparation" and "outstanding performance", thereby to stimulate the huge potential of sustainable nano-electrocatalysts in various research and industrial fields.

Cu2+-regulated one-pot wet-chemical synthesis of uniform PdCu nanostars for electrocatalytic oxidation of ethylene glycol and glycerol

The fabrication of effective and stable electrocatalysts is crucial for practical applications of direct alcohol fuel cells (DAFCs). In this study, bimetallic PdCu nanostars (PdCu NSs) were fabricated by a Cu²⁺-modulated one-pot wet-chemical method, where cetyltrimethyl ammonium bromide (CTAB) worked as a structure-regulating reagent. The morphology, compositions, crystal structures and formation mechanism of the as-prepared PdCu NSs were investigated by a series of techniques. The unique architectures created abundant active sites, which resulted in a large electrochemical active surface area (9.5 m² g^-1). The PdCu NSs showed negative shifts in the onset potentials and large forward peak current densities by contrast with those of commercial Pd black for the catalytic ethylene glycol oxidation reaction (EGOR) and glycerol oxidation reaction (GOR). It revealed that the PdCu NSs outperformed Pd black in the similar surroundings. This work provides a constructive strategy for fabrication of high-efficiency electrocatalysts for alcohol fuel cells.