Atomically Mo-Doped SnO2-x for efficient nitrate electroreduction to ammonia

The breaking of charge symmetry at the M-site in octahedral units of KMF3 perovskite induces enhanced electrochemical nitrate reduction in ammonia

Electrochemical production of NH3 from NO3- offers a solution to the environmental issue of excess NO3- but is challenged by the lack of efficient, sensitive electrocatalysts with high NH3 yield rate and Faraday efficiency (FE). Herein, a medium-entropy perovskite fluoride (KMF3, M = Co/Ni/Fe/Ti) was prepared as efficient electrocatalysts to produce NH3 via the NO3- reduction reaction (NO3-RR). By introducing various transition metals at the M-sites, the charge distribution at the M-site octahedral units was adjusted to increase the disorder of KMF3, resulting in an optimized electronic structure with high intrinsic NO3-RR performance. The presence of different transition metals at the M-sites promoted electron transfer, which inhibited the Co 1s-3d transition and strengthened the CoF bond, leading to a decrease in crystal symmetry. Furthermore, owing to differences in valence state, electronegativity, and ionic radius, the coordination number was reduced, inducing the generation of a local twisted coordination environment. This was conducive to catalyst adsorption and the breaking of NO bonds. As a result, the KMF3 exhibited a high NH3 yield rate of 13.9 mg h-1 cm-2 with an NH3 FE close to 100 %. The developed medium-entropy KMF3 electrocatalysts have the potential to recover NH3 from nitrate wastewater.

p-d Orbital Hybridization in Ag-based Electrocatalysts for Enhanced Nitrate-to-Ammonia Conversion

Considering the substantial role of ammonia, developing highly efficient electrocatalysts for nitrate-to-ammonia conversion has attracted increasing interest. Herein, we proposed a feasible strategy of p-d orbital hybridization via doping p-block metals in an Ag host, which drastically promotes the performance of nitrate adsorption and disassociation. Typically, a Sn-doped Ag catalyst (SnAg) delivers a maximum Faradaic efficiency (FE) of 95.5±1.85 % for NH3 at -0.4 V vs. RHE and reaches the highest NH3 yield rate to 482.3±14.1 mg h-1 mgcat. -1. In a flow cell, the SnAg catalyst achieves a FE of 90.2 % at an ampere-level current density of 1.1 A cm-2 with an NH3 yield of 78.6 mg h-1 cm-2, during which NH3 can be further extracted to prepare struvite as high-quality fertilizer. A mechanistic study reveals that a strong p-d orbital hybridization effect in SnAg is beneficial for nitrite deoxygenation, a rate-determining step for NH3 synthesis, which as a general principle, can be further extended to Bi- and In-doped Ag catalysts. Moreover, when integrated into a Zn-nitrate battery, such a SnAg cathode contributes to a superior energy density of 639 Wh L-1, high power density of 18.1 mW cm-2, and continuous NH3 production.

Vacancy-Rich SnO2 Quantum Dot Stabilized by Polyoxomolybdate as Electrocatalyst for Selective NH3 Production

The pronounced conductivity of tin dioxide (SnO2) nanoparticles makes it an ideal multifunctional electrode material, while the challenge is to stabilize the quantum dot (QD) SnO2 nanocore in water. An Anderson-type polyoxomolybdate, (NH4)6[Mo7O24], is employed as an inorganic ligand to stabilize a ca. 6 nm SnO2 QD (Mox@SnO2). X-ray scattering and diffraction studies confirm the tetragonal SnO2 nanocore in Mox@SnO2. Elemental analyses are in good agreement with the mass spectrometric detection of the [Mo7O24]6- cluster present in Mox@SnO2. The ionic POMs attached to the SnO2 surface through [Mo-O-Sn] covalent linkages have been established by surface zeta potential, shift of the [Mo = O]t Raman vibration, and extended X-ray absorption fine structure (EXAFS) analyses. The presence of the [Mo7O24]6- cluster in the Mox@SnO2 is responsible for the remarkable aqueous stability of Mox@SnO2 in the pH range of 3-9. Dominant oxygen vacancy in the SnO2 core, identified by EXAFS data and the anisotropic electron paramagnetic resonance (EPR) signals (g ∼ 2.4 and 1.9), results in facile electronic conduction in Mox@SnO2 while being deposited on the electrode surface. Mox@SnO2 acts as an active catalyst for the electrocatalytic nitrate reduction (eNOR) to ammonia with 94% faradaic efficiency (FE) at -0.2 V vs RHE and a yield rate of 28.9 mg h-1 cm-2. The stability of Mox@SnO2 in acidic pH provides scope to reuse the Mox@SnO2 electrode at least four times with notable NH3 selectivity and a superior production rate (239.06 mmol g-1(cat) h-1). This study demonstrates the essential role of POM in stabilizing SnO2 QD, harnessing its electrochemical activity toward electrocatalytic ammonia production.

High-efficiency electrocatalytic nitrite-to-ammonia conversion on molybdenum doped cobalt oxide nanoarray at ambient conditions

Electrochemical conversion of nitrite (NO2-) contaminant to green ammonia (NH3) is a promising approach to achieve the nitrogen cycle. The slow kinetics of the complex multi-reaction process remains a serious issue, and there is still a need to design highly effective and selective catalysts. Herein, we report that molybdenum doped cobalt oxide nanoarray on titanium mesh (Mo-Co3O4/TM) acts as a catalyst to facilitate electroreduction of NO2- to NH3. Such a catalyst delivers an extremely high Faradaic efficiency of 96.9 % and a corresponding NH3 yield of 651.5 μmol h-1 cm-2 at -0.5 V with strong stability. Density functional theory calculations reveal that the introduction of Mo can induce the redistribution of electrons around Co atoms and further strengthen the adsorption of NO2-, which is the key to facilitating the catalytic performance. Furthermore, the assembled battery based on Mo-Co3O4/TM suggests its practical application value.

Atomically dispersed Pd on defective BN nanosheets for nitrite electroreduction to ammonia

Electrocatalytic NO2- reduction to NH3 (NO2RR) offers a prospective strategy to concurrently achieve polluted NO2- removal and effective NH3 electrosynthesis. In this work, we report atomically dispersed Pd on defective BN nanosheets (Pd1/BN) as an efficient catalyst for the NO2RR, achieving the highest NH3-Faradaic efficiency of 91.7% with an NH3 yield rate of 347.1 μmol h-1 cm-2 at -0.6 V vs. RHE, superior to those of most previously reported electrocatalysts. Theoretical computations reveal the isolated Pd sites as catalytic centers to selectively adsorb NO2- and accelerate NO2--to-NH3 hydrogenation process with a minimized reaction barrier, eventually contributing to the considerably enhanced NO2RR selectivity and activity of Pd1/BN.

Tungsten Nitride/Tungsten Oxide Nanosheets for Enhanced Oxynitride Intermediate Adsorption and Hydrogenation in Nitrate Electroreduction to Ammonia

Electrochemical NO3- reduction reaction (NO3RR) is a promising technique for green NH3 synthesis. Tungsten oxide (WO3) has been regarded as an effective electrocatalyst for electrochemical NH3 synthesis. However, the weak adsorption and the sluggish hydrogenation of oxynitride intermediates (NOx, e.g., *NO3 and *NO2) over WO3 materials hinder the efficiency of converting NO3- to NH3. Herein, we design a heterostructure of tungsten nitride (WN) and WO3 (WN/WO3) nanosheets to optimize *NO3 and *NO2 adsorptions and facilitate *NO2 hydrogenations to achieve a highly efficient electrochemical NO3RR to produce NH3. Theoretical calculations predict that locally introducing WN into WO3 will shorten the distance between adjacent W atoms, resulting in *NO3 and *NO2 being strongly adsorbed on W active sites in the form of bidentate ligands instead of the relatively weak monodentate ligands. Furthermore, WN facilitates H2O dissociation to supply the requisite protons, which is beneficial for *NO2 hydrogenations. Inspired by theoretical prediction, WN/WO3 nanosheets are successfully fabricated through a high-temperature nitridation process. The transmission electron microscopy, X-ray photoelectron spectroscopy, and X-ray absorption near-edge spectroscopy investigations confirm that the amorphous WN has been locally introduced in situ into WO3 nanosheets to form a composite heterostructure. The as-prepared WN/WO3 nanosheets exhibit a high Faraday efficiency of 88.9 ± 7.2% and an appreciable yield rate of 8.4 mg h-1 cm-2 toward NH3 production, which is much higher than that of individual WO3 and WN. The enhanced adsorption and hydrogenation behaviors of *NOx over WN/WO3 are characterized by in situ Fourier-transform infrared spectroscopy, consistent with the theoretical predictions. This work develops facile and effective heterostructure nanomaterials to tune the adsorption and hydrogenation of NOx for boosting the efficiency from NO3- to NH3.

Electrocatalytic nitrite-to-ammonia reduction on isolated Cu sites

We report that isolated Cu atoms anchored on MnO2 nanowires (Cu1/MnO2) can be an effective catalyst towards the electrocatalytic NO2--to-NH3 reduction (NO2RR). A combination of experiments and theoretical calculations reveals that isolated Cu sites can effectively activate NO2-, lower the energy barrier of *NO→*NOH rate-determining step and suppress the competitive hydrogen evolution, thus facilitating both activity and selectivity towards the NO2RR. As a result, Cu1/MnO2 shows the maximum NH3-Faradaic efficiency of 93.3% with a corresponding NH3 yield rate of 439.8 μmol h-1 cm-2 at -0.7 V vs. RHE, together with an excellent electrocatalytic durability.

Nb-doped NiO nanoflowers for nitrite electroreduction to ammonia

Electrocatalytic reduction of nitrite to ammonia (NO2RR) is considered as an appealing route to simultaneously achieve sustainable ammonia production and abate hazardous nitrite pollution. Herein, atomically Nb-doped NiO nanoflowers are designed as a high-performance NO2RR catalyst, which exhibits the highest NH3-Faradaic efficiency of 92.4% with an NH3 yield rate of 200.5 μmol h-1 cm-2 at -0.6 V RHE. Theoretical calculations unravel that Nb dopants can act as Lewis acid sites to render effective NO2- activation, decreased protonation energy barriers, and restricted hydrogen evolution, ultimately leading to a high NO2RR selectivity and activity.