Construction of ACNF/Polypyrrole/MIL-100-Fe composites with exceptional removal performance for ceftriaxone and indomethacin inspired by "Ecological Infiltration System"

Engineering polyvinyl alcohol microspheres with capability for use in photothermal/chemodynamic therapy for enhanced transarterial chemoembolization

Transarterial chemoembolization (TACE) is widely recognized as a non-surgical treatment approach for advanced liver cancer, combining chemotherapy with the blockage of blood vessels supplying the tumor. To enhance the efficacy of TACE and address chemotherapy resistance, there is growing interest in the development of multifunctional embolic microspheres. In this study, multifunctional PVA microspheres, which encapsulate MIT as a chemotherapeutic drug, PPY as a photothermal agent, and Fe3O4 as a chemodynamic therapy agent, were prepared successfully. The results demonstrated that the developed multifunctional PVA microspheres not only exhibit favorable drug release, photothermal therapy, and chemodynamic therapy performance, but also show a promising synergistic therapeutic effect both in vitro and in vivo. Consequently, the engineered multifunctional PVA microspheres hold tremendous promise for enhancing TACE effectiveness and have the potential to overcome limitations associated with traditional liver cancer treatments.

Highly dispersed amorphous nano-selenium functionalized carbon nanofiber aerogels for high-efficient uptake and immobilization of Hg(II) ions

Owing to the strong Hg-Se interaction, Se-containing materials are promising for the uptake and immobilization of Hg(II) ions; compared with metal selenides or selenized compounds, elemental Se contains the highest ratio of Se. However, it remains a challenge to fully expose all the potential Se binding sites and achieve high utilization efficiency of elemental Se. Through rational design on the structure, dispersity, and size of materials, Se/CNF aerogels composed of abundant well-dispersed and amorphous nano-Se have been prepared and applied for the high-efficient uptake and immobilization of Hg(II) ions. The well-dispersion of nano-Se increases the exposure of Se sites, the amorphous structure benefits the easy cleavage of Se-Se bonds, the 3D porous networks of aerogels permit fast ions transport and easy operation. Benefiting from the combination effect of strong Hg-Se interaction and sufficient exposure of Se-enriched sites, the Se/CNF aerogels demonstrate strong binding ability (Kd = 3.8 ×105 mL·g-1), high capacity (943.4 mg·g-1), and preeminent selectivity (αMHg > 100) towards highly toxic Hg(II) ions. Notably, the utilization efficiency of Se in Se/CNF aerogels is as high as 99.5%. Moreover, the strong Hg-Se interaction and extraordinary stability of HgSe could minimize the environmental impact of the spent Se/CNF adsorbents after its disposal.

Solvent-thermal approach of MIL-100(Fe)/Cygnea/Fe3O4/TiO2 nanocomposite for the treatment of lead from oil refinery wastewater (ORW) under UVA light

The main purpose of this research endeavor is to reduce lead concentrations in the wastewater of an oil refinery through the utilization of a material composed of oyster shell waste (MIL-100(Fe)/Cygnea/Fe3O4/TiO2. Initially, iron oxide nanoparticles (Fe3O4) were synthesized via solvent-thermal synthesis. It was subsequently coated layer by layer with the organic-metallic framework MIL-100 (Fe) using the core-shell method. Additionally, the solvent-thermal method was utilized to integrate TiO2 nanoparticles into the magnetic organic-metallic framework's structure. Varieties of analytical analysis were utilized to investigate the physical and chemical properties of the synthetic final photocatalyst. Nitrogen adsorption and desorption technique (BET), scanning electron microscopy (SEM), scanning electron diffraction pattern (XRD), and transmission electron microscopy (TEM). Following the characterization of the final photocatalyst, the physical and chemical properties of the nanoparticles synthesized in each step, several primary factors that significantly affect the removal efficiency in the advanced oxidation system (AOPs) were examined. These variables consist of pH, photocatalyst dosage, lead concentration, and reaction temperature. The synthetic photocatalyst showed optimal performance in the removal of lead from petroleum wastewater under the following conditions: 35 °C temperature, pH of 3, 0.04 g/l photocatalyst dosage, and 100 mg/l wastewater concentration. Additionally, the photocatalyst maintained a significant level of reusability after undergoing five cycles. The findings of the study revealed that the photocatalyst dosage and pH were the most influential factors in the effectiveness of lead removal. According to optimal conditions, lead removal reached a maximum of 96%. The results of this investigation showed that the synthetic photocatalyst, when exposed to UVA light, exhibited an extraordinary capacity for lead removal.

3D-Printed river-type thick carbon electrodes for docking possible practical application-level capacitive deionization

The low carbon mass loading along with serious imbalance between the carbon mass loading and the electrode performance greatly hinders practical applications of capacitive deionization (CDI). Traditional thick bulk-type (BT) carbon electrodes often suffer from extremely limited active sites, thereby being vital to explore a basic strategy to unlock the performance. Herein, 3D-printed thick carbon electrodes were utilized for CDI desalination for the first time. The experimental outcomes revealed that BT electrodes existed a serious salt adsorption capacity (SAC) drop under variable mass loading of 3-30 mg/cm2. In contrary, 3D-printed river-type (RT) electrodes acquired a superior SAC of 10.67 mg/g and achieved 54.1 % SAC rise compared with that of BT electrodes (500 mg/L; 1.0 V; 30 mg/cm2). Meanwhile, RT electrodes took only 12 min to reach the equilibrium SAC of BT electrodes, being 44 min faster. Further, RT electrodes with diverse mass loading of 30-45 mg/cm2 were investigated, and it still kept 7.13 mg/g SAC under ultrahigh mass loading of 45 mg/cm2. This strategy has been successfully extended and carbons with proper micro-meso pore distribution, high specific capacitances and low resistance may be a better selection. Besides, the impact of electrode channel structure on the desalting performance was investigated, and the influence mechanism was revealed via COMSOL simulation. Overall, this work demonstrates the splendid feasibility of utilizing 3D-printed thick carbon electrodes for possible practical application-level CDI desalination.