Interface ion-exchange strategy of MXene@FeIn2S4 hetero-structure for super sodium ion half/full batteries

Constructing hierarchical MoS2/WS2 heterostructures in dual carbon layer for enhanced sodium ions batteries performance

The escalating global demand for clean energy has spurred substantial interest in sodium-ion batteries (SIBs) as a promising solution for large-scale energy storage systems. However, the insufficient reaction kinetics and considerable volume changes inherent to anode materials present significant hurdles to enhancing the electrochemical performance of SIBs. In this study, hierarchical MoS2/WS2 heterostructures were constructed into dual carbon layers (HC@MoS2/WS2@NC) and assessed their suitability as anodes for SIBs. The internal hard carbon core (HC) and outer nitrogen-doped carbon shell (NC) effectively anchor MoS2/WS2, thereby significantly improving its structural stability. Moreover, the conductive carbon components expedite electron transport during charge-discharge processes. Critically, the intelligently engineered interface between MoS2 and WS2 modulates the interfacial energy barrier and electric field distribution, promoting faster ion transport rates. Capitalizing on these advantageous features, the HC@MoS2/WS2@NC nanocomposite exhibits outstanding electrochemical performance when utilized as an anode in SIBs. Specifically, it delivers a high capacity of 415 mAh/g at a current density of 0.2 A/g after 100 cycles. At a larger current density of 2 A/g, it maintains a commendable capacity of 333 mAh/g even after 1000 cycles. Additionally, when integrated into a full battery configuration with a Na3V2(PO4)3 cathode, the Na3V2(PO4)3//HC@MoS2/WS2@NC full cell delivers a high capacity of 120 mAh/g after 300 cycles at 1 A/g. This work emphasizes the substantial improvement in battery performance that can be attained through the implementation of dual carbon confinement, offering a constructive approach to guide the design and development of next-generation anode materials for SIBs.

Micro-mesoporous cobalt phosphosulfide (Co3S4/CoP/NC) nanowires for ultrahigh rate capacity and ultrastable sodium ion battery

The construction of heterostructure materials has been demonstrated as the promising approach to design high-performance anode materials for sodium ion batteries (SIBs). Herein, micro-mesoporous cobalt phosphosulfide nanowires (Co3S4/CoP/NC) with Co3S4/CoP hetero-nanocrystals encapsulating into N-doped carbon frameworks were successfully synthesized via hydrothermal reaction and subsequent phosphosulfidation process. The obtained micro-mesoporous nanowires greatly improve the charge transport kinetics from the facilitation of the charge transport into the inner part of nanowire. When evaluated as SIBs anode material, the Co3S4/CoP/NC presents outstanding electrochemical performance and battery properties owing to the synergistic effect between Co3S4 and CoP nanocrystals and the conductive carbon frameworks. The electrode material delivers outstanding reversible rate capacity (722.33 mAh/g at 0.1 A/g) and excellent cycle stability with 522.22 mAh/g after 570 cycles at 5.0 A/g. Besides, the Ex-situ characterizations including XRD, XPS, and EIS further revealed and demonstrated the outstanding sodium ion storage mechanism of Co3S4/CoP/NC electrode. These findings pave a promising way for the development of novel metal phosphosulfide anodes with unexpected performance for SIBs and other alkali ion batteries.

Defect engineering unveiled: Enhancing potassium storage in expanded graphite anode

Expanded graphite (EG) stands out as a promising material for the negative electrode in potassium-ion batteries. However, its full potential is hindered by the limited diffusion pathway and storage sites for potassium ions, restricting the improvement of its electrochemical performance. To overcome this challenge, defect engineering emerges as a highly effective strategy to enhance the adsorption and reaction kinetics of potassium ions on electrode materials. This study delves into the specific effectiveness of defects in facilitating potassium storage, exploring the impact of defect-rich structures on dynamic processes. Employing ball milling, we introduce surface defects in EG, uncovering unique effects on its electrochemical behavior. These defects exhibit a remarkable ability to adsorb a significant quantity of potassium ions, facilitating the subsequent intercalation of potassium ions into the graphite structure. Consequently, this process leads to a higher potassium voltage. Furthermore, the generation of a diluted stage compound is more pronounced under high voltage conditions, promoting the progression of multiple stage reactions. Consequently, the EG sample post-ball milling demonstrates a notable capacity of 286.2 mAh g-1 at a current density of 25 mA g-1, showcasing an outstanding rate capability that surpasses that of pristine EG. This research not only highlights the efficacy of defect engineering in carbon materials but also provides unique insights into the specific manifestations of defects on dynamic processes, contributing to the advancement of potassium-ion battery technology.

Reinterpreting the Intercalation-Conversion Mechanism of FeP Anodes in Lithium/Sodium-Ion Batteries from Evolution of the Magnetic Phase

Batteries with intercalation-conversion-type electrodes tend to achieve high-capacity storage, but the complicated reaction process often suffers from confusing electrochemical mechanisms. Here, we reinterpreted the essential issue about the potential of the conversion reaction and whether there is an intercalation reaction in a lithium/sodium-ion battery (LIB/SIB) with the FeP anode based on the evolution of the magnetic phase. Especially, the ever-present intercalation process in a large voltage range followed by the conversion reaction with extremely low potential was confirmed in FeP LIB, while it is mainly the conversion reaction for the sodium storage mechanism in FeP SIB. The insufficient conversion reaction profoundly limits the actual capacity to the expectedly respectable value. Accordingly, a graphene oxide modification strategy was proposed to increase the reversible capacity of FeP LIB/SIB by 99% and 132%, respectively. The results facilitate the development of anode materials with a high capacity and low operating potential.

Achieving High-Rate and Stable Sodium-Ion Storage by Constructing Okra-Like NiS2/FeS2@Multichannel Carbon Nanofibers

Transition metal sulfides (TMSs) are considered as promising anode materials for sodium-ion batteries (SIBs) due to their high theoretical capacities. However, the relatively low electrical conductivity, large volume variation, and easy aggregation/pulverization of active materials seriously hinder their practical application. Herein, okra-like NiS2/FeS2 particles encapsulated in multichannel N-doped carbon nanofibers (NiS2/FeS2@MCNFs) are fabricated by a coprecipitation, electrospinning, and carbonization/sulfurization strategy. The combined advantages arising from the hollow multichannel structure in carbon skeleton and heterogeneous NiS2/FeS2 particles with rich interfaces can provide facile ion/electron transfer paths, ensure boosted reaction kinetics, and help maintain the structural integrity, thereby resulting in a high reversible capacity (457 mA h g-1 at 1 A g-1), excellent rate performance (350 mA h g-1 at 5 A g-1), and outstanding long-term cycling stability (93.5% retention after 1100 cycles). This work provides a facile and efficient synthetic strategy to develop TMS-based heterostructured anode materials with high-rate and stable sodium storage properties.

Organic polymer coating induced multiple heteroatom-doped carbon framework confined Co1-xS@NPSC core-shell hexapod for advanced sodium/potassium ion batteries

Synthesis of advanced structure and multiple heteroatom-doped carbon based heterostructure materials are the key to the preparation of high-performance energy storage electrode materials. Herein, the hexapod-shaped Co1-xS@NPSC has been triumphantly prepared using hexapod ZIF-67 as the sacrificial template to prepare Co1-xS inner core and N, P, and S tri-doped carbon (NPSC) as the shell through the carbonization of the organic polymer precursor. When applied as anode for Na+ batteries (SIBs) and K+ batteries (PIBs), Co1-xS@NPSC presents the high reversible specific capability of 747.4 mAh/g at 1.0 A/g after 235 cycles and 387.8 mAh/g at 5.0 A/g after 760 cycles for SIBs, as well as 326.7 mAh/g at 1.0 A/g after 180 cycles for PIBs. The excellent storage capacity and rate capability of Co1-xS@NPSC is ascribed to hexapod structure of ZIF-67 unlike the common dodecahedron, which is constructed with interior porous and exterior framework repository, donating supplemental active sites, and doping of multiple heteroatoms forming organic polymer coating inhibiting the volume expansion and restrains the agglomeration of Co1-xS nanoparticles. This approach has paved a bright avenue to exploit promising anode materials with novel structure and hetero-atom doping for high-performance energy storage devices.

Cobalt-vanadium sulfide yolk-shell nanocages from surface etching and ion-exchange of ZIF-67 for ultra-high rate-capability sodium ion battery

Development of high-performance metal sulfides anode materials is a great challenge for sodium-ion batteries (SIBs). In this work, a cobalt-based imidazolate framework (ZIF-67) were firstly synthesized and applied as precursor. After the successive surface etching, ion exchange and sulfidation processes, the final cobalt-vanadium sulfide yolk-shell nanocages were obtained (CoS2/VS4@NC) with VS4 shell and CoS2 yolk encapsulated into nitrogen doped carbon frameworks. This yolk-shell nanocage structure effectively increases the specific surface area and provides enough space for inhibiting the volume change during charge/discharge processes. Besides, the nitrogen doped carbon skeleton greatly improves the ionic conductivity and facilitates ion transport. When used as the anode materials for SIBs, the yolk-shell nanocages of CoS2/VS4@NC electrode exhibits excellent rate capability and stable cycle performance. Notably, it displays a long-term cycling stability with excellent capacity of 417.28 mA h g-1 after 700 cycles at a high current density of 5 A/g. This developed approach here provides a new route for the design and synthesis of various yolk-shell nanocages nanomaterials from enormous MOFs with multitudinous compositions and morphologies and can be extended to the application into other secondary batteries and energy storage fields.

Alkalized MXene/carbon nanotube composite for stable Na metal anodes

Ti3C2 MXenes are emerging 2D materials and have attracted increasing attention in sodium metal anode fabrication because of their high conductivity, multifunctional groups and excellent mechanical performances. However, the severe self-restacking of Ti3C2 MXenes is not conducive to dispersing Na+ and limits the function of regulating sodium deposition. Herein, an alkalized MXene/carbon nanotube (CNT) composite (named A-M-C) is introduced to regulate Na deposition behavior, which consists of Na3Ti5O12 microspheres, Ti3C2 MXene nanosheets and CNTs. Ti3C2 MXene nanosheets with large interlayer spaces and "sodiophilic" functional groups can provide abundant active sites for uniform nucleation and deposition of Na. Plenty of nanosheets are grown on the surface of the microsphere, thereby reducing the local current density, which can guide initial Na nucleation and promote Na dendrite-free growth. Furthermore, CNTs increase the electrical conductivity of the composite and achieve fast Na+ transport, improving the cycling stability of Na metal batteries. As a result, at a capacity of 1 mA h cm-2, the A-M-C electrode achieves a high average coulombic efficiency (CE) of 99.9% after 300 cycles at 2 mA cm-2. The symmetric cells of A-M-C/Na provide a long cycling life of more than 1400 h at 1 mA cm-2 with a minimal overpotential of 19 mV at an areal capacity of 1 mA h cm-2. The A-M-C/Na//NVP@C full cell presents a high coulombic efficiency of 98% with 100 mA g-1 in the first cycle. The strategy in this work provides new insights into fabricating novel MXene-based anode materials for dendrite-free sodium deposition.

Effects of Sodium Vacancies and Concentrations in Na3SO4F Solid Electrolyte

The sodium-rich solid electrolyte, Na3SO4F (NSOF), holds promise for eco-friendly and resource-abundant energy storage. While the introduction of heterovalent dopants has the potential to enhance its suitability for battery applications by creating Na vacancies, the effect of vacancies and sodium concentrations on sodium conduction remains unclear. In this work, Mg2+ was introduced into Na+ sites in Na3SO4F, generating sodium vacancies with different contents by using solid-state synthesis method. Among the resulting materials, Na2.96Mg0.02SO4F exhibited an ionic conductivity that is two-order-of-magnitude higher than NSOF at 298 K. Notably, as the sodium concentration decreased, the ionic conductivity also declined, revealing an equilibrium between Na vacancies and concentrations. To further investigate the influence of sodium concentration, excess Na+ was introduced into NaMgSO4F, which inherently possesses a lower sodium content by using solid-state synthesis method. However, this adjustment only led to an approximately one-order-of-magnitude enhancement in optimal ionic conductivity at 298 K. Combined with an in situ X-ray diffraction analysis, our findings underscore the greater sensitivity of sodium conduction to variations in sodium vacancies. This study paves the way for the development of ultrafast sodium ion conductors, offering exciting prospects for advanced energy storage solutions.

TiO2-modified two-dimensional composite of nitrogen-doped molybdenum trioxide nanosheets as a high-performance anode for lithium-ion batteries

Nitrogen-doped molybdenum trioxide (MoO3/NC) has drawbacks such as volume expansion during long-term charging and discharging cycles, which severely limit its further application. This work proposes the addition of titanium dioxide nanoparticles (TiO2 NPs) for performance improvement of MoO3/NC. TiO2 NPs embedded on the surface of a MoO3/NC nanosheet can alleviate its volume expansion and the accumulation of lithiated products and improve the conductivity of the electrode material. The results show that the MoO3/NC nanosheet decorated with TiO2 NPs (TiO2@MoO3/NC), when used as an electrode material, exhibited a discharge specific capacity of 419 mA h g-1 at a current density of 0.05 A g-1 and retained a discharge specific capacity of 517 mA h g-1 after 600 cycles at a current density of 1 A g-1.

Synergistic enhancement of chemisorption and catalytic conversion in lithium-sulfur batteries via Co3Fe7/Co5.47N separator mediator

Lithium-sulfur batteries (LSBs) show considerable potential in next-generation high performance batteries, but the heavy shuttle effect and sluggish redox kinetics of polysulfide hinder their further applications. In this paper, to address these shortcomings of LSBs, Co3Fe7/Co5.47N heterostructure were prepared and constructed from their Fe-Co Prussian blue analogue precursors under the condition of high temperature pyrolysis. The obtained Co3Fe7/Co5.47N display excellent immobilization-diffusion-conversion performance for polysulfides by synergistic effect in successfully hindering the shuttle effect of polysulfides. When the Co3Fe7/Co5.47N heterostructure were applied to modify the commercial polypropylene (PP) separator, the batteries displayed fantastic rate capacity and cycling stability. Specifically, the Co3Fe7/Co5.47N-PP batteries exhibit an extremely satisfactory initial specific capacity of 1430 m Ah/g at 0.5C, wonderful rate capacity of around 780 m Ah/g at 3C and superior per cycle decaying rate of 0.08 % for 500 cycles at 0.5C. When the current density reaches to 2C, the batteries still exhibit 501 m Ah/g after 900 cycles with 0.015 % per cycle decay rate. Besides, even in the high loading of sulfur (3.0 mg cm-2) at 0.5C, the superior cycling stability (0.075 % per cycle decay rate after 200 cycles) and high specific capacity (741 mAh/g after 200 cycles) can still be performed. Thus, this work provides a facile method for high-powered and long-life Li-S batteries with eminent entrapping-conversion processes of polysulfides.

Boosting the sodium storage performance of iron selenides by a synergetic effect of vacancy engineering and spatial confinement

Recently, iron selenides have been considered as one of the most promising candidates for the anodes of sodium-ion batteries (SIBs) due to their cost-effectiveness and high theoretical capacity; however, their practical application is limited by poor conductivity, large volume variation and slow reaction kinetics during electrochemical reactions. In this work, spatially dual-carbon-confined VSe-Fe3Se4-xSx/FeSe2-xSx nanohybrids with abundant Se vacancies (VSe-Fe3Se4-xSx/FeSe2-xSx@NSC@rGO) are constructed via anion doping and carbon confinement engineering. The three-dimensional crosslinked carbon network composed of the nitrogen-doped carbon support derived from polyacrylic acid (PAA) and reduced graphene enhances the electronic conductivity, provides abundant channels for ion/electron transfer, ensures the structure integrity, and alleviates the agglomeration, pulverization and volume change of active material during the chemical reactions. Moreover, the introduction of S into iron selenides induces a large number of Se vacancies and regulates the electron density around iron atoms, synergistically improving the conductivity of the material and reducing the Na+ diffusion barrier. Based on the aforementioned features, the as-synthesized VSe-Fe3Se4-xSx/FeSe2-xSx@NSC@rGO electrode possesses excellent electrochemical properties, exhibiting the satisfactory specific capacity of 630.1 mA h g-1 after 160 cycles at 0.5 A/g and the reversible capacity of 319.8 mA h g-1 after 500 cycles at 3 A/g with the low-capacity attenuation of 0.016 % per cycle. This investigation provides a feasible approach to develop high-performance anodes for SIBs via a synergetic strategy of vacancy engineering and carbon confinement.

Construction of 2D sandwich-like Na2V6O16·3H2O@MXene heterostructure for advanced aqueous zinc ion batteries

Aqueous zinc ion batteries (AZIBs) have attained enormous attention in the last few years. The cathode materials of aqueous zinc ion batteries play a vital effect in their electrochemical and battery properties. In this manuscript, Sandwich-like MXene@Na2V6O16·3H2O (NVO@MXene) heterostructure was successfully prepared by the combination and cooperation of the layer lattice structure of Na2V6O16·3H2O and the high conductivity of MXene. When used as the cathode material for AZIBs, NVO@MXene demonstrates preeminent rate capability and excellent reversible capacity of 175 mAh/g after 3000 cycles at 5 A/g with a retention rate of 88.9 % of initial discharge capacity. The outstanding battery performance can be attributed to the MXene layers with high conductivity for accelerating the ion diffusion rate and reducing the agglomeration of Na2V6O16·3H2O nanowires during the (dis)charge process. Meanwhile, the stable layered structure of Na16V6O6·3H2O with wide interlamellar spacing (d = 7.9 Å) is also favorable for the s fast intercalation/deintercalation of Zn2+. Finally, ex-situ X-ray diffraction and X-ray photoelectron spectroscopy were applied to study and reveal the energy storage mechanism of this novel material for aqueous zinc ion batteries.

3R-NbS2 as a highly stable anode for sodium-ion batteries

Anode materials for advanced sodium-ion batteries (SIBs) require major improvements with regard to their cycling stability, which is a crucial parameter for long-term battery operation. Herein, we report 3R-NbS2, synthesised by a simple solid-state annealing route, as an anode for SIBs with remarkable cycling stability for 2500 cycles at 0.5 A g-1. The stable nature of the NbS2 anode was attributed to its dominant capacitive behaviour.

Modified separators boost polysulfides adsorption-catalysis in lithium-sulfur batteries from Ni@Co hetero-nanocrystals into CNT-porous carbon dual frameworks

In this manuscript, nickel/cobalt bimetallic nanocrystals confining into three-dimensional interpenetrating dual-carbon conductive structure (NiCo@C/CNTs) were successfully manufactured by annealing its core-shell structure (Ni-ZIF-67@ZIF-8) precursor under the high temperature. The results presented that the bimetallic nickel and cobalt nanocrystals with superior catalytic activity could quickly convert solid Li2S/Li2S2into soluble LiPSs and effectively decrease the energy barrier. While the hierarchical CNT-porous carbon dual frameworks can provide quick electron/ion transport because of their large specific surface area and the exposure of enough active sites. When used as the separator modifier for lithium sulfur batteries, the battery properties were significantly improved with high specific capacity, outstanding rate capability, and long-term cycle stability. Specifically, its initial specific capacity can achieve to 1038.51 mAh g-1 at 0.5C. At the high rate of 3C, it still delivers satisfactory discharge capacity of 555 mAhg-1 and the capacity decay rate is only 0.065% per cycle after 1000 cycles at 1C. Furthermore, even exposed to heavy sulfur loading (3.61 mg/cm2), they still maintain promising cycle stability. Therefore, such kinds of MOFs derivative with powerful chemical immobilization and catalytic conversion for polysulfides provides a novel guidance for the modification separator and the potential application in the field of high-performance Li-S batteries.

Topochemical and phase transformation induced Co9S8/NC nanosheets for high-performance sodium-ion batteries

In this paper, a cobalt-based sulfide nanosheet structure (Co9S8/NC) was successfully synthesized by topochemical and phase transformation processes from a dodecahedral cobalt-based imidazole skeleton (ZIF-67) as a self-template. The 2D sheet structure facilitates full contact of electrode materials with the electrolyte and shortens the diffusion distance for electrons and ions. In addition, the nitrogen-doped carbon framework derived from ZIF-67 promotes electron transfer and provides a reliable skeleton to buffer volume expansion during discharging and charging. Finally, Co9S8/NC exhibits excellent rate capability and stable cycling performance for the anode of a sodium ion battery, delivering a specific capacity remaining at 530 mA h g-1 after 130 cycles at a current density of 1 A g-1.

ZnSe@NPSC core-shell nanorods for super sodium ion storage induced from an organic polymer derived N, P, S tri-doped carbon framework

In this work, core-shell structured ZnSe@NPSC nanorods were prepared with a N, P, S hetero-doped carbon shell. The design of the core-shell structure is conducive to facilitating the transport of electrons and buffering the volume expansion during charge/discharge processes, which is favourable for improving the sodium ion storage properties of ZnSe@NPSC. Therefore, it can deliver capacities of 376.67 mA h g-1 after 150 cycles at 0.5 A g-1 and 359.1 mA h g-1 after cycling for 350 cycles at 1.0 A g-1, respectively.

MOF-Derived Nitrogen-Doped Porous Carbon Polyhedrons/Carbon Nanotubes Nanocomposite for High-Performance Lithium-Sulfur Batteries

Nanocomposites that combine porous materials and a continuous conductive skeleton as a sulfur host can improve the performance of lithium-sulfur (Li-S) batteries. Herein, carbon nanotubes (CNTs) anchoring small-size (~40 nm) N-doped porous carbon polyhedrons (S-NCPs/CNTs) are designed and synthesized via annealing the precursor of zeolitic imidazolate framework-8 grown in situ on CNTs (ZIF-8/CNTs). In the nanocomposite, the S-NCPs serve as an efficient host for immobilizing polysulfides through physical adsorption and chemical bonding, while the interleaved CNT networks offer an efficient charge transport environment. Moreover, the S-NCP/CNT composite with great features of a large specific surface area, high pore volume, and short electronic/ion diffusion depth not only demonstrates a high trapping capacity for soluble lithium polysulfides but also offers an efficient charge/mass transport environment, and an effective buffering of volume changes during charge and discharge. As a result, the Li-S batteries based on a S/S-NCP/CNT cathode deliver a high initial capacity of 1213.8 mAh g-1 at a current rate of 0.2 C and a substantial capacity of 1114.2 mAh g-1 after 100 cycles, corresponding to a high-capacity retention of 91.7%. This approach provides a practical research direction for the design of MOF-derived carbon materials in the application of high-performance Li-S batteries.