Quinone-amine polymer nanospheres with enhanced redox activity for aqueous proton storage

Anode Materials for Proton Batteries: Progress and Prospects

A proton battery is considered as a promising energy storage solution with the merits of fast kinetics, high safety, low cost, and environmental benignity. The realization of these merits depends on the exploration of the appropriate and high-performance electrode materials. Although many anode materials of proton batteries have been reported, a dedicated summary of the progress, challenges, and prospects of anode materials for proton batteries has not been reported. Through discussions on the proton storage mechanisms, advantages and limitations of various anode materials, optimization strategies to boost their proton storage capability, and their potential applications, this review seeks to provide a comprehensive theoretical foundation and practical guidance for future research and development of proton battery technology. First, the preparation methods and proton storage mechanism of anode materials have been discussed. Then, the limitations and optimization strategies have been summarized. After that, the next section elaborately focuses on the proton storage performance of different types of anode materials. Finally, the challenges and prospects of anode materials for proton batteries have been proposed. This review aims to provide insight into the efficient design and optimization of anode materials for practical applications of proton batteries.

Optimizing Mn in Prussian blue analogs with double redox active sites to induce boosted Zn2+ storage

Prussian Blue analogs (PBAs) are a suitable aqueous zinc-ion batteries (AZIBs) cathode material, but they face issues related to low specific capacity and cycling lifespan due to insufficient active sites and poor ion de-intercalation structural stability. In this study, Mn-Prussian Blue Analog (Mn-PBA) is fabricated using a simple co-precipitation method and the morphology of Mn-PBA is further optimized through artificially manipulating concentration gradients strategy, effectively enhancing the structural stability of Zn2+ de-intercalation. Furthermore, the introduction of Mn established dual Zn2+ active centers in Mn-PBA (Mn-O and Fe(CN)6]4-/[Fe(CN)6]3-), leading to an increased specific capacity. As a proof of concept for AZIBs, the optimized Mn-PBA-3 cathode exhibits a high reversible specific capacity of 143.5 mAh/g and maintains a capacity retention of 88.5 % after 250 cycles at 1 A/g, surpassing commercial MnO2 (30.5 mAh/g after 100 cycles). Mn-PBA-3 also delivers a high capacity of 79.0 mA h g-1 after 2000 cycles of 10 A/g. The mechanism of the Zn2+ double redox reaction of Mn-PBA-3 has been revealed in detail by in situ Raman and a series of ex situ techniques. Under a high operating voltage window of 0-1.9 V, Zn//Mn-PBA-3 demonstrates a capacity of 99.3 mAh/g after 800 cycles (5 A/g) by assembling zinc ion button battery. This work has reference significance for structurally modulated PBAs used in high performance AZIBs.

A carbonyl-rich conjugated organic compound for aqueous rechargeable Na+ storage with wide voltage window workability

Organic compounds have become an important electrode material for aqueous electrochemical energy storage. However, organic electrodes still face poor performance in aqueous batteries due to insufficient electrochemical activity. In this work, a novel conjugated quinone compound containing a rich carbonyl group was designed. The quinone compound was synthesized by a simple dehydration reaction of pyrene-4,5,9,10-tetrone (PTO) and 1,2-diaminoanthraquinone (1,2-AQ); it contains 4 pyrazines (CN) from AQ and 4 carbonyl groups (CO), as well as a large number of active sites and the excellent conductivity brought by its conjugated structure ensures the high theoretical capacity of PTO-AQ. In the context of aqueous sodium ion batteries (ASIBs), the electrode material known as PTO-AQ exhibits a notable reversible discharge capacity of 117.9 mAh/g when subjected to a current density of 1 A/g; impressively, it maintained a capacity retention rate of 74.3 % even after undergoing 500 charge and discharge cycles, a performance significantly surpassing that of pristine PTO and AQ. Notably, PTO-AQ exhibits a wide operating voltage range (-1.0-0.5 V) and a cycle life of up to 10,000 cycles. In situ Raman and ex situ measurements were used to analyze the structural changes of PTO-AQ during charge and discharge and the energy storage mechanism in NaAC. The effective promotion of Na+ storage brought by a rich carbonyl group was obtained. The structural energy level and electrostatic potential of PTO-AQ were calculated, and the active center distribution of PTO-AQ was obtained. This work serves as a guide for designing high-performance aqueous organic electrode materials that operate across a wide voltage range while also explaining their energy storage mechanism.

Metal-injection and interface density engineering induced nickel diselenide with rapid kinetics for high-energy sodium storage

The key to the innovation of sodium-ion batteries (SIBs) is to find efficient sodium-storage electrode. Here, metal Mo doping of NiSe2 is proposed by modified electrospinning strategy followed by in situ conversion process. The Mo-NiSe2 anchoring on hollow carbon nanofibers (HCNFs) would make full use of the multi-channel HCNFs in the inner layer and the active sites of Mo-NiSe2 in the outer layer, which plays an important role in buffering the volume stress of Na+ (de)insertion and reducing the adsorption energy barrier of Na+. Innovatively, it is proposed to jointly regulate the SIBs performance of NiSe2 by both metal atom doping and interface effects, thereby adjusting the sodium ion adsorption barrier of NiSe2. The Mo-NiSe2@HCNFs exhibits remarkable performance in SIBs, demonstrating a high specific capacity of 396 mAh/g after 100 cycles at 1 A/g. Moreover, it maintains outstanding cycling stability, retaining 77.6 % of its capacity (211 mAh/g) even after 1000 cycles at 10 A/g. This comprehensive electrochemical performances are due to the structural stability and outstanding electronic conductance of the Mo-NiSe2@HCNFs, as evidenced by the diffusion analysis and ex situ charge-discharge process characterization. Furthermore, coupled with the Na3V2(PO4)2O2F cathodes, the full cell also achieves a high energy density of 123 Wh kg-1. The theoretical calculation of the hypervalent Mo doing further proves the benefit of its Na+ adsorption and denser conduction band distribution. This study provides a reference for the construction of transition metal selenide via doping and interface engineering in sodium storage.