Cobalt vacancy-originated TiMnCoCN compounds with a self-adjusting ability for the high-efficiency acidic oxygen evolution reaction

Co─Mn Bimetallic Nanowires by Interfacial Modulation with/without Vacancy Filling as Active and Durable Electrocatalysts for Water Splitting

Active and stable nonnoble electrocatalysts for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) are required for water splitting by sustainable electricity. Here, Mn bonded with O and P is incorporated to modulate Co3S4 and Co2P respectively to enhance the catalytic activity and extend the catalyst lifetime. Mn3O4 adjusts the electronic structure of Co3S4 and Co atom fills the oxygen vacancy in Mn3O4. The interfacial interaction endows Co3S4/Mn3O4 to a lower reaction barrier due to ideal binding energies for OER intermediates. Structure stability of active sites and enhanced Co─S bonds by Operando Raman spectroscopy and theoretical calculations reduce the dissolution of Co3S4/Mn3O4, resulting in a lifetime of 500 h at 50 mA cm-2 for OER. The modulation of Co2P by MnP weakens the interaction between Co sites and adsorbed H*, achieving a high activity under a large current for HER. The assembled electrolyzer affords 50 mA cm-2 at 1.58 V and exhibits a lifetime of 350 h at 50 mA cm-2. The calculations disclose the electron interaction for the activity and stability, as well as the enhanced conductivity. The findings develop new avenues toward promoting catalytic activity and stability, making Co─Mn bimetallic nanowires efficient electrocatalysts for nonnoble water electrolyzers.

Heterointerface MnO2/RuO2 with rich oxygen vacancies for enhanced oxygen evolution in acidic media

The design and synthesis of oxygen evolution reaction (OER) electrocatalysts that operate efficiently and stably under acidic conditions are important for the preparation of green hydrogen energy. The low intrinsic catalytic activity and poor acid resistance of commercial RuO2 limit its further development, and the construction of heterointerface structures is the most promising strategy to break through the intrinsic activity limitation of electrocatalysts. Herein, we synthesized spherical and oxygen vacancy-rich heterointerface MnO2/RuO2 using morphology control, which promoted the kinetics of the oxygen evolution reaction with the interaction between oxygen vacancies and the oxide heterointerface. MnO2/RuO2 was reported to be an acidic OER catalyst with excellent performance and stability, requiring only an ultra-low overpotential of 181 mV in 0.5 M H2SO4 to achieve a current density of 10 mA cm-2. The catalyst activity remained essentially unchanged in a 140 h stability test with an ultra-high mass activity (858.9 A g-1@ 1.5 V), which was far superior to commercial RuO2 and most previously reported noble metal-based acidic OER catalysts. The experimental results showed that the effect of more oxygen vacancies and the heterointerfaces of manganese ruthenium oxides broke the intrinsic activity limitation, provided more active sites for the OER, accelerated reaction kinetics, and improved the stability of the catalyst. The excellent performance of the catalyst suggests that MnO2/RuO2 provides a new idea for the design and study of heterointerfaces in metal oxide nanomaterials.

Enhanced Electrocatalytic Oxygen Evolution by In Situ Growth of Tetrametallic Metal-Organic Framework Electrocatalyst FeCoNiMn-MOF on Nickel Foam

Developing highly efficient, cost-effective, non-noble-metal-based electrocatalysts with superior performance and stability for oxygen evolution reactions is of immense challenge as well as great importance for the upcoming sustainable and green energy conversion technologies. The multivariate metal-organic frameworks with hierarchical porous structures and unsaturated coordination modes are considered to be promising emerging energy materials. In this work, a series of multimetallic MOFs were directly grown on nickel foam (NF) through the solvothermal method. Notably, the optimized tetrametallic FeCoNiMn-MOF/NF shows a low overpotential of 239 mV to achieve a current density of 50 mA cm-2 with a Tafel slope of 62.05 mV dec-1 for OER in 1 M KOH. It also exhibits excellent stability and durability over 100 h in chronoamperometric studies. The enhanced performance is closely tied to the high activity of iron and nickel ions and the decomposed and reconstructed Ni/Fe-OOH intermediates of the FeCoNiMn-MOF/NF during the OER process, which are revealed by XPS analysis and in situ Raman spectroscopy. This present work demonstrates the feasibility and advantage of utilizing highly efficient and durable multimetallic MOFs for electrocatalytic oxygen evolution.

Cerium Doping-Induced Enrichment of Ni3S4 Phase for Boosting Oxygen Evolution Reaction

The development of low-cost transition metal compounds with high-performance for efficient oxygen evolution reaction (OER) is of great significance in promoting the development of electrocatalysis. In this study, a Ce-doped Ni3S4 catalyst (Ce0.2-Ni3S4) was synthesized through a one-step solvothermal method, where the doped rare earth element Ce induced the transformation of NiS to Ni3S4. The Ce0.2-Ni3S4 catalyst exhibited excellent OER performance in 1 M KOH. At a current density of 10 mA cm-2, it showed a low overpotential of 230 mV and a low Tafel slope of 52.39 mV dec-1. Long-term OER tests at the same potential lasted for 24 h without significant loss of current density. This work introduces a novel method of Ce element doping for modifying transition metal sulfides, providing new insights into the effective utilization of rare earth elements in the field of electrochemistry. It creates more chances for the progress of highly efficient catalysts for efficient OER, contributing to the advancement of electrocatalysis.

Boosting electrocatalytic performance via electronic structure regulation for acidic oxygen evolution

High-purity hydrogen produced by water electrolysis has become a sustainable energy carrier. Due to the corrosive environments and strong oxidizing working conditions, the main challenge faced by acidic water oxidation is the decrease in the activity and stability of anodic electrocatalysts. To address this issue, efficient strategies have been developed to design electrocatalysts toward acidic OER with excellent intrinsic performance. Electronic structure modification achieved through defect engineering, doping, alloying, atomic arrangement, surface reconstruction, and constructing metal-support interactions provides an effective means to boost OER. Based on introducing OER mechanism commonly present in acidic environments, this review comprehensively summarizes the effective strategies for regulating the electronic structure to boost the activity and stability of catalytic materials. Finally, several promising research directions are discussed to inspire the design and synthesis of high-performance acidic OER electrocatalysts.