Influence of bone morphogenetic protein and proportion of hydroxyapatite on new bone formation in biphasic calcium phosphate graft: Two pilot studies in animal bony defect model

Three-Dimensionally Printed Biphasic Calcium Phosphate Ceramic Substrates as the Sole Inducer of Osteogenic Differentiation in Stromal Vascular Fraction Cells

The stromal vascular fraction (SVF) is a derivate of fat tissue comprising both adipose-derived mesenchymal stem cells and endothelial cells and serves as a promising cell source for engineering vascularized bone tissues. Its combination with osteoconductive biphasic calcium phosphate (BCP) ceramic may represent a point-of-care agent for bone reconstruction. Here we assessed the proliferation and osteogenic differentiation capacities of SVF on 3D printed BCP implants, in comparison with isolated adipose-derived mesenchymal stem cells (AD-MSCs). AD-MSCs and SVF isolated from human donors were seeded on plastic or 3D printed BCP ceramics with sinusoidal or gyroid macrotopography and cultured in the presence or absence of osteogenic factors. Vascular, hematopoietic and MSC surface markers were assessed by flow cytometry whereas osteogenic activity was investigated through alizarin red staining and alkaline phosphatase activity. Osteogenic factors were necessary to trigger osteogenic activity when cells were cultured on plastic, without significant difference observed between the two cell populations. Interestingly, osteogenic activity was observed on BCP implants in the absence of differentiation factors, without significant difference in level activity between the two cell populations and macrotopography. This study offers supportive data for the use of combined BCP scaffolds with SVF in a perspective of a one-step surgical procedure for bone regeneration.

Wnt10b regulates osteogenesis of adipose-derived stem cells through Wnt/β-catenin signalling pathway in osteoporosis

Our previous finding revealed that the Wnt10b RNA expression of osteoporotic adipose-derived stem cells (OP-ASCs) with impaired osteogenic capacity was significantly reduced than that of ASCs. There are no ideas that the relationship between the OP-ASCs' impaired osteogenic potential and Wnt10b expression. This study aimed to indicate the potential molecular mechanisms and functional role of Wnt10b in OP-ASCs, as well as to investigate a potential application to reverse the OP-ASCs' impaired osteogenic differentiation potential. The OP-ASCs and ASCs were harvested from the inguinal fat of osteoporosis (OP) mice with bilateral ovariectomy (OVX) and normal mice. qPCR and WB were used to detect the different levels of the expression of the Wnt10b RNA in both OP-ASCs and ASCs. Lentiviral-mediated regulation of Wnt10b expression was employed for OP-ASCs, and the detection of the expression levels of key molecules in the Wnt signalling pathway and key osteogenic factors was performed through qPCR and WB in vitro experiments. The capacity of OP-ASCs to osteogenesis was determined using alizarin red staining. Lastly, the repair effect of the BCP scaffolds incorporating modified OP-ASCs on the critical-sized calvarial defects (CSCDs) in OP mice was scanned and detected by micro-computed tomography, haematoxylin and eosin staining, Masson's trichrome staining and immunohistochemistry. First, we discovered that both the RNA and protein expression levels of Wnt10b were significantly lower in OP-ASCs than that in ASCs. In vitro experiments, upregulation of Wnt10b could activate the Wnt signalling pathway, and increase expression of β-catenin, Lef1, Runx2 and osteopontin (Opn), thereby enhancing the osteogenic ability of OP-ASCs. In addition, the OP-ASCs with Wnt10b-overexpressing could promote the repair of CSCD in osteoporotic mice with increasing new bone volume, bone mineral density, and increased expression of Opn in new bone in vivo. Taken together, overexpression of Wnt10b could partially facilitate the differentiation of OP-ASCs towards osteogenesis and accelerated the healing of bone defects by activating the Wnt/β-catenin signalling pathway in vitro and in vivo experiments. This study confirmed the important role of Wnt10b in regulating the osteogenic differentiation capability of OP-ASCs and indicated Wnt10b could be a potential therapeutic target for reversing the impaired osteogenic capabilities of OP-ASCs to therapy bone defects of OP patients.

Effect of polydeoxyribonucleotide on early bone formation in lateral bone augmentation with immediate implant placement: an experimental in vivo study

This study investigated early bone formation using collagenated biphasic calcium phosphate (CBCP) with or without polynucleotide (PDRN). Third (P3) or fourth (P4) premolars of six male beagle dogs were extracted and 5-mm-high dehiscence defects were created, followed by 3D-printed implant placement. The buccal bone defects were grafted with (i) CBCP and collagen membrane or (ii) CBCP soaked in polydeoxyribonucleotide (CBCP/PDRN) and collagen membrane. Samples of the experimental sites were harvested at 2- and 6-weeks post-surgery. The specimens were evaluated with radiologic and histomorphometric analysis. No significant differences were found between the CBCP and CBCP/PDRN groups in the micro-CT analysis at 2 or 6 weeks. No significant differences were observed in bone-to-implant contact (BIC) or bone area fraction occupancy (BAFO) in buccal augmented and lingual non-augmented areas. In the qualitative analysis, the new bone (NB) area and NB proportion in buccal augmented areas showed significantly higher values in the CBCP/PDRN group than in the CBCP group at 2 and 6 weeks. Peri-implant buccal dehiscence defects with immediate 3D-printed implant placement were corrected using a collagen membrane and CBCP or CBCP/PDRN. PDRN might have the potential to facilitate early bone formation with sufficient stability over time in dehiscence defects.

Effect of different HA/β-TCP coated 3D printed bioceramic scaffolds on repairing large bone defects in rabbits

BACKGROUND

Treatment of large segmental bone defects is still a major clinical challenge, and bone grafting is the main method. The development of novel bone graft substitutes will help solve this problem.

METHODS

Porous bioceramics hydroxyapatite (HA) scaffolds coated with different ratios of HA/β-tricalcium phosphate (β-TCP) were prepared by 3D printing. The scaffolds were sampled and tested in large segmental bone defect rabbit models. X-ray, micro-computed tomography (CT), hematoxylin and eosin (HE) staining, Van-Gieson staining, and type I collagen staining were performed to find the best scaffolds for large segmental bone defect treatment.

RESULTS

The average length, diameter, compressive strength, and porosity of the bioceramics scaffolds were 15.05 ± 0.10 mm, 4.98 ± 0.06 mm, 11.11 ± 0.77 MPa, and 54.26 ± 5.38%, respectively. Postoperative lateral radiographs suggested the scaffold group got better bone healing and stability than the blank group. Micro-CT showed new bones grew into the scaffold from the two ends of the fracture along the scaffold and finally achieved bony union. The new bone volume around the scaffolds suggested the 3:7 HA/β-TCP-coated bioceramic scaffolds were more favorable for the healing of large segmental bone defects. The results of HE, Van-Gieson, and type I collagen staining also suggested more new bone formation in 3:7 HA/β-TCP-coated bioceramic scaffolds.

CONCLUSION

3:7 HA/β-TCP-coated porous bioceramics scaffolds are more conducive to the repair of large bone defects in rabbits. The results of this study can provide some reference and theoretical support in this area.

Bone Regeneration Effect of Nanochitosan with or without Temporally-controlled Release of Dexamethasone

INTRODUCTION

Chitosan is a cationic biopolymer and its modification as a nanoparticle, as well as loading a corticosteroid on it, may enhance its bone regenerative effect. The aim of this study was to investigate the bone regenerative effect of nanochitosan with or without dexamethasone.

METHODS

Under general anesthesia, four cavities were created in the calvarium of 18 rabbits and filled with either nanochitosan, nanochitosan with a temporally-controlled release of dexamethasone (nanochitosan+dexamethasone), an autograft, or left unfilled (control). The defects were then covered with a collagen membrane. The rabbits were randomly divided into 2 groups and were sacrificed at 6 or 12 weeks post-surgery. The new bone type, osteogenesis pattern, foreign body reaction, as well as the type and severity of the inflammatory response were evaluated histologically. The amount of new bone was determined using histomorphometry and cone-beam computed tomography (CBCT). A one-way ANOVA with repeated-measures was performed to compare results between the groups at each interval. A T-test and Chi-square were also conducted to analyze changes in variables between the two intervals.

RESULTS

Nanochitosan and the combination of nanochitosan and dexamethasone significantly increased the combination of woven and lamellar bone (P=0.007). No sample showed a foreign body reaction or any acute or severe inflammation. Chronic inflammation was significantly decreased in number (P=0.002) and severity (P=0.003) over time. There was no significant difference between the extent and pattern of osteogenesis amongst the four groups, as evaluated by histomorphometry and CBCT at each interval.

CONCLUSION

Nanochitosan and nanochitosan+dexamethasone were comparable to the gold standard of autograft regarding the type and severity of inflammation, as well as the level and pattern of osteogenesis, yet they induced more woven and lamellar bone.

Molecular Dynamics Simulation of Biomimetic Biphasic Calcium Phosphate Nanoparticles

Biphasic calcium phosphate (BCP) is used as a bone substitute and bone tissue repair material due to its better control over bioactivity and biodegradability. It is crucial to stabilize the implanted biomaterial while promoting bone ingrowth. However, a lack of standard experimental and theoretical protocols to characterize the physicochemical properties of BCP limits the optimization of its composition and properties. Computational simulations can help us better to learn BCP at a nanoscale level. Here, the Voronoi tessellation method was combined with simulated annealing molecular dynamics to construct BCP nanoparticle models of different sizes, which were used to understand the physicochemical properties of BCP (e.g., melting point, infrared spectrum, and mechanical properties). We observed a ∼20 to 30 Å layer of calcium-deficient hydroxyapatite at the HAP/β-TCP interface due to particle migration, which may contribute to BCP stability. The BCP model may stimulate further research into BCP ceramics and multiphasic ceramics. Moreover, our study may facilitate the optimization of compositions of BCP-based biomaterials.

Carrier systems for bone morphogenetic proteins: An overview of biomaterials used for dentoalveolar and maxillofacial bone regeneration

Different types of biomaterials have been used to fabricate carriers to deliver bone morphogenetic proteins (BMPs) in both dentoalveolar and maxillofacial bone regeneration procedures. Despite that absorbable collagen sponge (ACS) is considered the gold standard for BMP delivery, there is still some concerns regarding its use mainly due to its poor mechanical properties. To overcome this, novel systems are being developed, however, due to the wide variety of biomaterial combination, the heterogeneous assessment of newly formed tissue, and the intended clinical applications, there is still no consensus regarding which is more efficient in a particular clinical scenario. The combination of two or more biomaterials in different topological configurations has allowed specific controlled-release patterns for BMPs, improving their biological and mechanical properties compared with classical single-material carriers. However, more basic research is needed. Since the BMPs can be used in multiple clinical scenarios having different biological and mechanical needs, novel carriers should be developed in a context-specific manner. Thus, the purpose of this review is to gather current knowledge about biomaterials used to fabricate delivery systems for BMPs in both dentoalveolar and maxillofacial contexts. Aspects related with the biological, physical and mechanical characteristics of each biomaterial are also presented and discussed.

•

Strategies for bone formation and regeneration are a major concern in dentistry.

•

Topical delivery of bone morphogenetic proteins (BMPs) allows rapid bone formation.

•

BMPs requires proper carrier system to allow controlled and sustained release.

•

Carrier should also fulfill mechanical requirements of bone defect sites.

•

By using complex composites, it would be possible to develop new carriers for BMPs.

Effect of Recombinant Human Bone Morphogenetic Protein-2 (rhBMP-2) with Hydroxyapatite Carrier in Induced Membrane Technique: A Retrospective Propensity Score-Matched Study

OBJECTIVES

To determine the effect of recombinant human bone morphogenetic protein-2 (rhBMP-2) with hydroxyapatite (HA) carrier augmentation in managing critical-sized bone defect (CSBD) with induced membrane technique (IMT).

DESIGN

Retrospective comparative study.

SETTING

Academic level I trauma center.

PATIENTS/PARTICIPANTS

The study included 14 patients who underwent rhBMP-2 with HA carrier (rhBMP-2/HA) augmentation in IMT for managing CSBD (BMP group). Moreover, 14 patients who underwent IMT without rhBMP-2 augmentation were matched by propensity score analysis (non-BMP group).

INTERVENTION

IMT with or without rhBMP-2/HA augmentation.

MAIN OUTCOME MEASUREMENT

Changes in quality and quantity measurements of grafted bone to regenerated bone using serial computed tomography.

RESULTS

In the BMP and non-BMP groups, the changes in densities from grafted bone to regenerated bone were +379.63 Hounsfield unit and +248.55 Hounsfield unit (P = 0.034), changes in dense bone percentage were +37.52% and +23.31% (P = 0.027), corticalization rates under the plate were 79.70% and 39.30% (P = 0.007), changes in volume were -20.77% and -23.35% (P = 0.812), union rates were 85.71% and 78.57% (P = 0.622), numbers of patients requiring additional procedures were 4 and 3 (P = 0.663), and time to union were 316.3 and 585.45 days (P = 0.040), respectively.

CONCLUSIONS

RhBMP-2/HA augmentation increases the density of regenerated bone, enhances corticalization under the plate, and shortens the time to union while managing CSBD with IMT.

LEVEL OF EVIDENCE

Therapeutic Level III. See Instructions for Authors for a complete description of levels of evidence.

Bone Using Stem Cells for Maxillofacial Bone Disorders: A Systematic Review and Meta-analysis

Due to economic, cultural, environmental, and social factors, the prevalence of maxillofacial bone disorders varies in different parts of the world. The present meta-analysis was conducted to assess the efficacy and safety of different type of stem cells-based scaffolds and their construction methods in maxillofacial bone disorders. We searched major indexing databases, including PubMed/Medline, ISI Web of Science, Scopus, Embase, and Cochrane Central without any language, study region, or type restrictions. A systematic search of articles published up to July 2021 was done. Of the 428 studies found through initial searches, 36 met the inclusion criteria. After applying the exclusion criteria, the main properties of 32 articles on 643 animals and 4 experimental studies on 52 patients (age range from 43 to 74 years) included in this meta-analysis. Our pooled analysis showed that stem cells-based scaffolds significantly improved the bone regeneration and formation in maxillofacial bone disorders (Prevalence: 0.54; 95% CI: 0.43, 0.64, P < 00001, I2 = 90 2). According to the results of these studies, in most studies, bone marrow-derived mesenchymal stem cells (BMSCs) have been used to regenerate bone, and these cells are still the gold standard in bone tissue engineering, a growth factor that is one of the three sides of the tissue engineering triangle. Bone morphogenetic proteins (BMP) especially BMP2 and platelet-rich plasma (PRP) are the most widely used growth factor and scaffold respectively. Platelet-rich plasma (PRP) is used as a scaffold and since it contains proteins, it also used as a growth factor and can be a stimulant of ossification. It seems that the future perspective of bone tissue engineering is to use the prototyping rapid method to build a composite and patient-specific scaffold from CT and MRI images, along with genetically modified stem cells.

The Effectiveness of Compartmentalized Bone Graft Sponges Made Using Complementary Bone Graft Materials and Succinylated Chitosan Hydrogels

Bone defects can occur from many causes, including disease or trauma. Bone graft materials (BGMs) have been used to fill damaged areas for the reconstruction of diseased bone tissues since they are cost effective and readily available. However, BGMs quickly disperse around the tissue area, which ultimately leads to it migrating away from the defect after transplantation. We tested chitosan hydrogels as a useful carrier to hold BGMs in the transplantation area. In this study, we synthesized succinylated chitosan (SCS)-based hydrogels with a high decomposition rate and excellent biocompatibility. We confirmed that BGMs were well distributed inside the SCS hydrogel. The SCS-B hydrogel showed a decrease in mechanical properties, such as compressive strength and Young’s modulus, as the succinylation rate increased. SCS-B hydrogels also exhibited a high cell growth rate and bone differentiation rate. Moreover, the in vivo results showed that the SCS hydrogel resorbed into the surrounding tissues while maintaining the BGMs in the transplantation area for up to 6 weeks. These data support the idea that SCS hydrogel can be useful as a bioactive drug carrier for a broad range of biomedical applications.

Enhanced Bone Regeneration in Variable-Type Biphasic Ceramic Phosphate Scaffolds Using rhBMP-2

Our aim was to investigate the bone regeneration capacity of powder-type biphasic ceramic scaffold (BCP powder), block-type BCP (BCP block), and collagen-added block-type BCP (BCP collagen) with different concentrations of recombinant human bone morphogenetic protein 2 (rhBMP-2) in an animal model. Four rabbits were assigned to each of the following groups: no graft + rhBMP-2 (0.1/0.2 mg/mL), BCP powder + rhBMP-2 (0.1/0.2 mg/mL), BCP block + rhBMP-2 (0.1/0.2 mg/mL), and BCP collagen + rhBMP-2 (0.1/0.2 mg/mL), i.e., a total of 32 rabbits. Polycarbonate tubes (Φ 7 mm × 5 mm) for supporting scaffolds were fixed into a 7 mm round border. Subsequently, 0.1 mL of rhBMP-2 solutions with different concentrations was injected into the tubes. Both radiological and histomorphometric analyses showed that osteogenesis was not enhanced by increasing the concentration of rhBMP-2 in all groups at both 3 and 6 weeks. Radiological analysis showed that bone formation was higher in the BCP collagen group than in the BCP powder and BCP block groups at both rhBMP-2 concentrations at 3 weeks. rhBMP-2 enhanced bone formation; however, as the concentration increased, bone formation could not be enhanced infinitely. Collagen-added alloplastic graft material may be useful for mediating rapid bone formation in initial stages.

Prognosis of single tooth implants following alveolar ridge preservation with two recombinant human bone morphogenetic protein-2 delivery systems

Background

We previously reported similar efficacies of alveolar ridge preservation (ARP) on single extraction socket with two different E. coli derived recombinant human bone morphogenetic protein-2 (rhBMP-2) delivery systems (Cowell BMP, Cowell medi Co, Busan, Korea; β-tricalcium phosphate and hydroxyapatite particle & O-BMP, Osstem Implant Co, Busan, Korea; absorbable collagen sponge). After the trial, we completed implant therapy and observed over an average of 3 years. This follow-up study was performed retrospectively to compare result of implant treatment at the preserved alveolar ridge site.

Methods

Patients who underwent extraction of single tooth and received ARP with one of two rhBMP-2 delivery systems from October 2015 to October 2016 were enrolled. Twenty-eight patients (Group 1: Cowell BMP 14; Group 2: O-BMP 14) who underwent implant therapy and prosthetic treatment were included in study. Stability and marginal bone loss (MBL) of each implant were collected from medical charts and radiographs, and analyzed. The survival and success rates of implants were calculated.

Results

The primary implant stability represented by implant stability quotient (ISQ) for Groups 1 and 2 was 69.71 and 72.86, respectively. The secondary implant stability for Groups 1 and 2 was 78.86 and 81.64, respectively. Primary and secondary stabilities were not statistically different (P = 0.316 and 0.185, respectively). MBL at the latest follow-up was 0.014 mm in Group 1 over 33.76 ± 14.31 months and 0.021 mm in Group 2 over 40.20 ± 9.64 months, with no significant difference (P = 0.670). In addition, the success rate of implants was 100% (14/14) in Group 1 and 92.9% (13/14) in Group 2, with survival rate of 100% (14/14) in Group 1 and 92.9% (13/14) in Group 2.

Conclusions

We confirmed good prognosis in both groups as a result of implant therapy after ARP with each of two rhBMP-2 carriers.

Systematic scoping review of mandibular bone tissue engineering

Tissue engineering is a promising alternative that may facilitate bony regeneration in small defects in compromised host tissue as well as large mandibular defects. This scoping systematic review was therefore designed to assess in vivo research on its use in the reconstruction of mandibular defects in animal models. A total of 4524 articles were initially retrieved using the search algorithm. After screening of the titles and abstracts, 269 full texts were retrieved, and a total of 72 studies included. Just two of the included studies employed osteonecrosis as the model of mandibular injury. All the rest involved the creation of a critical defect. Calcium phosphates, especially tricalcium phosphate and hydroxyapatite, were the scaffolds most widely used. All the studies that used a scaffold reported increased formation of bone when compared with negative controls. When combined with scaffolds, mesenchymal stem cells (MSC) increased the formation of new bone and improved healing. Various growth factors have been studied for their potential use in the regeneration of the maxillofacial complex. Bone morphogenic proteins (BMP) were the most popular, and all subtypes promoted significant formation of bone compared with controls. Whilst the studies published to date suggest a promising future, our review has shown that several shortfalls must be addressed before the findings can be translated into clinical practice. A greater understanding of the underlying cellular and molecular mechanisms is required to identify the optimal combination of components that are needed for predictable and feasible reconstruction or regeneration of mandibular bone. In particular, a greater understanding of the biological aspects of the regenerative triad is needed before we can to work towards widespread translation into clinical practice.

Effect of MicroRNA-20a on Osteogenic Differentiation of Human Adipose Tissue-Derived Stem Cells

Osteogenic differentiation of human adipose tissue-derived stem cells (hASCs) is a complex process that is regulated by multiple factors, including microRNAs (miRNAs). The miRNA miR-20a was shown to promote bone formation from bone marrow-derived mesenchymal stem cells. However, the role of miR-20a in osteogenic differentiation of hASCs remains unclear. In this study, we systematically evaluated the function of miR-20a in regulating hASC osteogenesis in vitro. hASCs were transduced with miR-20a-overexpressing and miR-20a-sponge lentiviral vectors, with green fluorescent protein (GFP) as a control. The results showed that miR-20a transcription was upregulated after hASC mineralization. Compared with the miR-20a-sponge, GFP, and hASC groups, the miR-20a-overexpressing group showed higher alkaline phosphatase (ALP) activity on days 7 and 14. Moreover, the mRNA level of ALP increased significantly in the miR-20a-overexpressing group on day 14. Furthermore, the protein of the target gene PPARγ was decreased, and the osteogenic differentiation-associated proteins ALP, osteocalcin, and RUNX2 were upregulated. hASCs anchored to HA/β-TCP revealed a healthy polygonal morphology and developed cytoplasmic extensions. miR-20a promoted osteogenic differentiation of the cell scaffold. Taken together, these data -confirm that miRNA-20a promotes the osteogenesis of hASCs in vitro, and its essential role in vivo needs further -investigation.

Evaluation of New Bone Formation Using Autogenous Tooth Bone Graft Combined with Platelet-Rich Fibrin in Calvarial Defects

The purpose of the present study was to evaluate the contributions of autogenous tooth bone graft (ATBG) combined with platelet-rich fibrin (PRF) on new bone formation and bone morphogenetic protein (BMP)-2 in rabbit calvarial defects. Twelve male New Zealand rabbits were used in this study. Three circular bone defects were prepared in each rabbit with a drill. These defects were divided into 3 groups: control, treated with ATBG, and treated with ATBG+PRF. The animals were sacrificed at 28 days. Samples were evaluated by histomorphometric analyses and total augmented area, new bone area and bone density were calculated. In addition, expression of BMP-2 was determined by immunohistochemical staining. The total augmented area, new bone area and bone density were significantly greater in the ATBG group than in the control group (P <0.05). Also, these values were significantly higher in the ATBG+PRF group than the ATBG group (P <0.05). Test groups demonstrated significantly increased BMP-2 levels compared with the control group (P <0.05). The present study suggested that ATBG combined with PRF significantly increased the new bone formation and enhanced bone healing in cranial defects.

The role of antimiR-26a-5p/biphasic calcium phosphate in repairing rat femoral defects

Although miRNAs have been implicated in the osteogenic differentiation of stem cells, their role in bone repair and reconstruction in tissue‑engineered bone grafts remains unclear. We previously reported that microRNA (miR)‑26a‑5p inhibited the osteogenic differentiation of adipose‑derived mesenchymal stem cells (ADSCs), and that antimiR‑26a‑5p exerted the opposite effect. In the present study, the role of miR‑26a‑5p‑ and antimiR‑26a‑5p‑modified ADSCs combined with biphasic calcium phosphate (BCP) scaffolds was evaluated in a rat femur defect model. The aim of the present study was to improve the understanding of the role of miR‑26a‑5p in bone regeneration in vivo, as well as to provide a new method to optimize the osteogenic ability of BCPs. ADSCs were infected with Lv‑miR‑26a‑5p, Lv‑miR‑NC, Lv‑antimiR‑26a‑5p or Lv‑antimiR‑NC respectively, and then combined with BCP scaffolds to repair rat femoral defects. Using X‑rays, micro‑computed tomography and histology at 2, 4, and 8 weeks postoperatively, the quantity and rate of bone regeneration were analyzed, revealing that they were the highest in animals treated with antimiR‑26a‑5p and the lowest in the miR‑26a‑5p treatment group. The expression levels of osteocalcin, collagen I, Runt‑related transcription factor 2, Wnt family member 5A and calmodulin‑dependent protein kinase II proteins were positively correlated with the bone formation rate. Taken together, the present results demonstrated that miR‑26a‑5p inhibited bone formation while antimiR‑26a‑5p accelerated bone formation via the Wnt/Ca2+ signaling pathway. Therefore, antimiR‑26a‑5p‑modified ADSCs combined with BCP scaffolds may be used to construct an effective tissue‑engineering bone graft for bone repair and reconstruction.

Nano-Biphasic Calcium Phosphate Ceramic for the Repair of Bone Defects

Calcium phosphate bioceramics has recently experienced increased interest in bone reconstruction. Mimicking of natural structure of bone, like the use of nanomaterials, is an attractive approach for generating scaffolds for bone regeneration. The aim of present study was to evaluate the effect of nanonization on the biphasic calcium phosphate (BCP) ceramic in the repair of bone cavities in the canine mandible. A commercial BCP was dry-milled in a high energy planetary ball mill with zirconia balls and container. Three holes (8 mm in diameter) were outlined to the depth of cortical bone of mandibular angle of 5 dogs bilaterally. The first hole (positive control group A, n = 10) was filled in with commercial BCP material. The second hole was loaded with the nanonized BCP (experimental group C, n = 10) and the third one was left untreated (negative control group B, n = 10). The defects were allowed to regenerate for 8 weeks. New bone formation was greater in groups A and C than in B. No difference was seen between group A and group C (P = 0.676). The residual bone material in group C (19.34 ± 8.03) was as much as one-half of that in group A (38.69 ± 7.90%) (P = 0.000). The negative control group B presented the highest amount of soft tissue within the bone defects. The least percentage of marrow space was found in the positive control group (13.23 ± 13.52). Our results depicted that the rate of resorption increased significantly after nanonization even though the nano-sized BCP failed to make a superior regeneration than the ordinary BCP.

Ectopic osteogenesis effect of antigen-extracted xenogeneic cancellous bone graft with chitosan/rhBMP-2/bFGF sequential sustained-release nanocapsules

To explore the ectopic osteogenesis effect of sequential sustained release application of recombinant human bone morphogenic protein-2 (rhBMP-2) and basic fibroblast growth factor (bFGF). Antigen-extracted xenogeneic cancellous bone coupled with growth factor-loaded chitosan nanocapsules were implanted in rats in intramuscular site in accordance with the following experimental pattern: group A: simultaneous burst release of rhBMP-2 and bFGF; group B: simultaneous sustained release of rhBMP-2 and bFGF; group C: preferential burst release of rhBMP-2, then sustained release of bFGF; group D: preferential burst release of bFGF, then sustained release of rhBMP-2; group E: sustained release of rhBMP-2 alone; group F: sustained release of bFGF alone, blank control group G: antigen-extracted xenogeneic cancellous bone graft only; negative control group H: not filled with anything. Specimens were obtained after executing the animals at 2 and 4 weeks for general observation and weighing, calcium content detection, micro-CT scanning and bone parameter measurement analysis, H&E staining, ALP staining and CD34 staining. The materials weight of A-2, B-2, C-2, A-4, B-4, C-4, D-4 and E-4 were significantly higher than that of preoperative materials ( P < 0.05). The concentration of calcium of group B-4 was the highest (414.7 ± 12.03 mg/dl). Micro-CT scanning and bone parameter measurement analysis showed that the values of bone mineral density and trabecular thickness of group A, B, D, E at 4 weeks were both higher than the ones at 2 weeks ( P < 0.05), and both the bone mineral density (367.52 ± 11.64 mg/cc) and the trabecular thickness (126.17 ± 11.36 μm) of group B-4 were the highest. H&E staining showed that a large region of calcified cartilage and haemopoietic tissues were newly formed, especially in group B-4. ALP staining and CD34 staining showed the most positive expression region in group B-4. Therefore, we conclude that simultaneous sustained release of rhBMP-2 and bFGF is the ideal way to release drug, and has better inducement of antigen-extracted xenogeneic cancellous bone graft.

The Influences of Different Ratios of Biphasic Calcium Phosphate and Collagen Augmentation on Posterior Lumbar Spinal Fusion in Rat Model

PURPOSE

To determine the influence of different ratios of hydroxyapatite (HA)/beta tricalcium phosphate (β-TCP) and collagen augmentation for posterior lumbar fusion in a rat model.

MATERIALS AND METHODS

We generated a posterior lumbar fusion model in 50 rats and divided it into five groups of equal number as follows; 1) autologous bone graft as group A, 2) 70% HA+30% β-TCP as group B, 3) 70% HA+30% β-TCP+collagen as group C, 4) 30% HA+70% β-TCP as group D, and 5) 30% HA+70% β-TCP+collagen as group E. Rats were euthanized at 12 weeks after surgery and fusion was assessed by manual palpation, quantitative analysis using microCT and histology.

RESULTS

The score of manual palpation was significantly higher in group C than group E (3.1±1.1 vs. 1.8±0.8, p=0.033). However, in terms of microCT analysis, group D showed significantly higher scores than group B (5.5±0.8 vs. 3.1±1.1, p=0.021). According to quantitative volumetric analysis, 30% HA+70% β-TCP groups (group D and E) showed significantly reduced fusion mass at 12 weeks after surgery (123±14.2, 117±46.3 vs. 151±27.3, p=0.008, 0.003, respectively). Collagen augmentation groups revealed superior results in terms of both microCT score and histologic grade.

CONCLUSION

A 7:3 HA/β-TCP ratio with collagen augmentation rather than a 3:7 HA/β-TCP ratio could be a more favorable graft substitute for lumbar spinal fusion. There was positive role of collagen as an adjunct for spinal bone fusion process.

Histologic and histomorphometric evaluation of bone regeneration using nanocrystalline hydroxyapatite and human freeze-dried bone graft : An experimental study in rabbit

PURPOSE

Bone regeneration is an important concern in periodontal treatment and implant dentistry. Different biomaterials and surgical techniques have been used for this purpose. The aim of the present study was to compare the effect of nanocrystalline hydroxyapatite and human freeze-dried bone graft (FDBG) in regeneration of rabbit calvarium bony defects by histologic and histomorphometric evaluation.

METHODS

In this experimental study, three similar defects, measuring 8 mm in diameter, were created in the calvaria of 16 white New Zealand rabbits. Two defects were filled with FDBG and nanocrystalline hydroxyapatite silica gel, while the other one remained unfilled to be considered as control. All the defects were covered with collagen membranes. During the healing period, two animals perished; so 14 rabbits were divided into two groups: half of them were euthanized after 6 weeks of healing and the other half after 12 weeks. The specimens were subjected to histologic and histomorphometric examinations for assessment of the following variables: percentage of bone formation and residual graft material, inflammation scores, patterns of bone formation and type of newly formed bone.

RESULTS

The percentages of new bone formation after 6 weeks were 14.22 ± 7.85, 21.57 ± 6.91, and 20.54 ± 10.07% in FDBG, NanoBone, and control defects. These values were 27.54 ± 20.19, 23.86 ± 6.27, and 26.48 ± 14.18% in 12-week specimens, respectively. No significant differences were found in the amount of bone formation between the groups. With regard to inflammation, the control and NanoBone groups showed significantly less inflammation compared to FDBG at the 6-week healing phase (P = 0.04); this difference was not significant in the 12-week specimens.

CONCLUSIONS

Based on the results of this experimental study, both NanoBone and FDBG exhibited a similar effect on bone formation.

Biphasic calcium phosphates bioceramics (HA/TCP): Concept, physicochemical properties and the impact of standardization of study protocols in biomaterials research

Biphasic calcium phosphates (BCP) bioceramics have become the materials of choice in various orthopedic and maxillofacial bone repair procedures. One of their main advantages is their biodegradation rate that can be modified by changing the proportional ratio of the composition phases. For enhanced bone tissue regeneration, the bioactivity of BCP should be increased by optimizing their physicochemical properties. To date, the ideal physicochemical properties of BCP for bone applications have not been defined. This is mostly related to lack of standard study protocols in biomaterial science especially with regards to their characterizations and clinical applications. In this paper we provided a review on BCP and their physicochemical properties relevant to clinical applications. In addition, we summarized the available literature on their use in animal models and evaluated the influences of different composition ratios on bone healing. Controversies in literature with regards to ideal composition ratio of BCP have also been discussed in detail. We illustrated the discrepancies in study protocols among researchers in animal studies and emphasized the need to develop and follow a set of generally accepted standardized guidelines. Finally; we provided general recommendations for future pre-clinical studies that allow better standardization of study protocols. This will allow better comparison and contrast of newly developed bone substitute biomaterials that help further progress in the field of biomaterial science.

Rapid bone regeneration by Escherichia coli-derived recombinant human bone morphogenetic protein-2 loaded on a hydroxyapatite carrier in the rabbit calvarial defect model

Background

The aim of this study was to determine the osteoconductivity of hydroxyapatite particles (HAP) as a carrier for Escherichia coli-derived recombinant human bone morphogenetic protein-2 (ErhBMP-2). Two 8-mm diameter bicortical calvarial defects were created in each of 20 rabbits. One of each pair of defects was randomly assigned to be filled with HAP only (HAP group) or ErhBMP-2 loaded HAP (ErhBMP-2/HAP group), while the other defect was left untreated (control group). The animals were killed after either 2 weeks (n = 10) or 8 weeks (n = 10) of healing, and histological, histomorphometric, and tomographic analyses were performed.

Results

All experimental sites showed uneventful healing during the postoperative healing period. In both histomorphometric and tomographic analyses, the new bone area or volume of the ErhBMP-2/HAP group was significantly greater than that of the HAP and control groups at 2 weeks (p < 0.05). However, at 8 weeks, no significant difference in new bone area or volume was observed between the ErhBMP-2/HAP and HAP groups. The total augmented area or volume was not significantly different between the ErhBMP-2/HAP and HAP groups at 2 and 8 weeks.

Conclusions

Combining ErhBMP-2 with HAP could significantly promote rapid initial new bone formation. Moreover, HAP graft could increase new bone formation and space maintenance, therefore it might be one of the effective carriers of ErhBMP-2.

Extra-oral defect augmentation using autologous, bovine and equine bone blocks: A preclinical histomorphometrical comparative study

OBJECTIVES

This study aimed to compare autologous bone (AB), bovine bone (BB), and equine bone (EB) blocks with regard to de novo bone formation, connective tissue, and residual bone substitute material portions in a standardized defect animal model.

MATERIAL AND METHODS

In the frontal skull of 20 pigs, 106 standardized cylindrical "critical size defects" were prepared. Defects were randomly filled with AB, BB, and EB blocks. After a healing period of 30 and 60 days, de novo bone formation, residual bone substitute material, and connective tissue portion was assessed by means of histomorphometry (Toluidine blue O staining). Mann-Whitney U-tests were used to evaluate differences between the groups.

RESULTS

The de novo bone formation was significantly higher in the AB group in comparison to the xenogeneic groups (p < 0.05). After 30 days, EB showed significantly (p < 0.05) more newly formed bone compared to the BB group. The soft tissue formation was significantly higher in the BB and EB group. Defects augmented with BB showed significantly (p < 0.05) higher portions of bone substitute materials compared to sides augmented with EB after 30 days.

CONCLUSION

In the extra-oral model, AB blocks were superior concerning de novo bone formation. No clinical advantages of EB blocks could be observed.