Difference in nasolabial features between awake and asleep infants with unilateral cleft lip: Anthropometric measurements using three-dimensional stereophotogrammetry

Philtral Height Discrepancy in Patients with Complete and Incomplete Cleft Lips + /-Palate - Results from a Single Nation Consecutive Cohort

INTRODUCTION

The aim of unilateral cleft lip repair is to restore form and function, including symmetrisation of cleft and non-cleft philtral height. Expectation of best outcome is achieved in situations with minimal asymmetry and is assumed occurs most often in incomplete cleft lip only patients. We sought to investigate philtral height discrepancy (PHD) in children with unilateral cleft lip + /-palate from a single nation cohort.

METHODS

Review of prospectively collected PHD measurements taken at time of surgery for all children undergoing unilateral cleft lip repair in Scotland born Jan 2017-December 2020. Data was collected using Microsoft Excel and analysed using embedded statistical software.

RESULTS

102 consecutive patients with unilateral lip involvement were identified from the national database. 94 had prospectively documented PHD (92.2%). The majority of patients had an isolated cleft lip (51.1%). Incomplete clefts presented more frequently (52.1%) than complete clefts (47.9%). Mean PHD for the whole cohort was 3.91mm (standard deviation 1.01mm, range 1-6mm). The difference in mean PHD (in-complete versus complete) was 1.1mm (3.4 vs. 4.5, p < 0.001). For lip only versus lip and palate the difference in mean PHD was 1.0mm (3.4 vs. 4.4, p < 0.001).

CONCLUSIONS

This single country consecutive cohort review of PHD in children undergoing unilateral cleft lip repair statistically supports the anecdote that patients with an incomplete cleft lip and isolated cleft lip have lesser asymmetry at presentation. This study presents a consecutive cohort with a greater range of PHD than has previously been reported in the literature.

Morphometric Assessment of Facial Morphology in Infants with Orofacial Clefts up to two Years of Age: A Three-Dimensional Cross-Sectional Study

OBJECTIVE

To assess modelled facial development of infants with unilateral cleft lip (CL) and cleft lip and palate (UCLP) compared to controls up to two years of age.

DESIGN AND PARTICIPANTS

A total of 209 facial images of children (CL: n = 37; UCLP: n = 39; controls: n = 137) were obtained in four age categories (T0 = 0.2-0.5; T1 = 0.6-1.0; T2 = 1.1-1.5; T3 = 1.6-2.0 years) and were evaluated using stereophotogrammetry and geometric morphometry. All patients underwent lip surgery before T0, patients with UCLP underwent palatoplasty (T0, T1 before palatoplasty; T2, T3 after palatoplasty).

RESULTS

In patients with CL, the forehead was significantly retracted (p ≤ 0.001), while the supraorbital and ocular regions were prominent (p ≤ 0.001). The oronasal region appeared convex (p ≤ 0.001). The lower lip and chin were non-significantly protruded. In patients with UCLP, a significantly retracted forehead and prominent supraorbital region were apparent (p ≤ 0.001). A retrusive oronasal region (p ≤ 0.001) was observed in the middle face. The chin was anteriorly protruded (p ≤ 0.01). No progression of deviations was found with increasing age. After the first year, a slight improvement in the morphological features became apparent. The shape variability of the clefts and controls overlapped, suggesting a comparable modelled facial development.

CONCLUSIONS

The facial morphology of individuals with cleft was comparable to the norm. Shape deviation was apparent in the oronasal region, forehead, and chin, which minimised with increasing age even in complete clefts.

Change in Incisional Design in Primary Unilateral Cleft Lip Repair Under General Anesthesia

Nasolabial features of infants with unilateral cleft lip (UCL) are different when they are under general anesthesia for lip repair compared to when they are awake. This study aimed to investigate changes in the incisional design of cheiloplasty according to patient position and anesthesia: upright and awake versus supine and under general anesthesia. Three-dimensional images of 20 infants with UCL were randomly selected. Two different incisional designs were drawn on the images captured while the infants were awake. Those incisional designs were anthropometrically compared to the designs drawn on the images captured while the infants were under general anesthesia. Under general anesthesia, vermillion height of both the medial and lateral sides of the cleft became significantly greater. In the rotation-advancement design, the incisional line of the rotation flap on the medial lip element became significantly shorter under general anesthesia, whereas the advancement flap on the lateral lip element was not significantly altered. In an anatomical subunit approximation, both lengths of the philtral ridge on the noncleft side and incisional line along the philtral ridge on the cleft side became significantly shorter under general anesthesia, but these alterations did not affect the calculation of the width of the small triangular flap on the lateral lip element. These changes in nasolabial features after general anesthesia may cause surgical error, which result in secondary cleft lip deformities. However, because these changes varied among infants, preoperative planning using three-dimensional facial images of infants who are awake may be able to avoid surgical error.

Three-Dimensional Measurement of the Lateral Lip Element Sacrificed in Primary Repair of a Unilateral Cleft Lip

BACKGROUND

In most children with a unilateral cleft lip (UCL), because lateral lip tissue on the cleft side is congenitally short, the lateral lip element should be appropriately excised during primary cheiloplasty so that symmetric nasolabial features are obtained after surgery. The purpose of this study was to measure how much of the lateral lip element is removed during primary cheiloplasty and compare the amount of sacrifice between different incision designs.

METHODS

Preoperative 3-dimensional images of 50 infants with UCL were randomly selected. The incision designs of 3 representative techniques (Millard, Onizuka, and Fisher) were drawn on the images that were obtained before the primary repair. The lateral lip tissue excised by each technique was estimated as a percentage of the surface area of the sacrificed lateral lip to the entire lateral lip of the cleft side.

RESULTS

In the case of incomplete UCL, the median values (range) were 3.2% (1.1%-5.9%), 11.6% (8.3%-20.1%), and 27.2% (15.1%-42.3%) for the Millard, Onizuka, and Fisher repairs, respectively. In cases of complete UCL, no sacrifice was needed for the Millard repair, whereas the median values (range) were 10.6% (5.2%-28.9%) and 22.5% (11.5%-48.6%) for the Onizuka and Fisher repairs, respectively. In Millard repair, the median values (range) of the lateral lip element that was resected before skin closure according to the "cut-as-you-go" policy were 5.8% (2.2%-11.8%) in cases with an incomplete UCL and 4.9% (2.7%-9.1%) in cases with a complete UCL.

CONCLUSIONS

Our study demonstrated that sacrifice of the lateral lip element was minimal in the Millard repair, whereas it could exceed 20% in the Fisher repair. However, additional sacrifice of the advancement flap was needed in the Millard-type repair. The ratio of the lateral lip sacrifice varied between patients. Although UCL repair techniques should not be evaluated with the sacrifice ratio, excessive sacrifice of the lateral lip tissue can complicate the secondary lip correction. We recommend that surgeons estimate preoperatively how much lateral lip element will be sacrificed with each incision design using a 3-dimensional image for each child with a UCL.

Simultaneous, radiation-free registration of the dentoalveolar position and the face by combining 3D photography with a portable scanner and impression-taking

Objectives

Simultaneous, radiation-free registration of the teeth and the upper and lower jaw positions in relation to the extraoral soft tissue could improve treatment planning and documentation. The purpose of this study is to describe a workflow to solve this form of registration and surface acquisition with a mobile device.

Methods

Facial scans of ten healthy participants were taken using a blue-light LED 3D scanner (Artec® Space Spider; Artec® Group; Luxembourg). An impression of the maxillary dentoalveolar arch was taken simultaneously to the 3D photo using a modified impression tray with two different extraoral registration geometries (sphere vs. cross). Following, an impression of the mandibular dentoalveolar arch was taken once. Both impressions were scanned with the 3D scanner. All resulting standard tesselation language (.stl) files of the geometries were compared to the original, virtual .stl files and the root mean square errors (RMSE) were calculated for each surface (Artec Studio 13 Professional × 64; Artec® Group; Luxembourg) to determine which geometry serves as a better reference for intra-extraoral registration.

Results

The RMSE between the original geometries and the scanned counterfeits were statistically lower for spherical geometries (p < 0.008). Once scanned and aligned, both geometries enabled an alignment of the intra- and extraoral scan. However, the spherical geometries showed virtually better results without significance (p = 0.70).

Conclusions

The presented study provides a radiation-free solution for simultaneous dentoalveolar correlations in relation to the extraoral soft tissue. Spherical geometries achieved more precise and easier intra-extraoral alignments using the applied mobile 3D scanner and workflow.

Association between three-dimensional measurements of the unilateral cleft lip nasal deformity and maxillary alveolar morphology: A retrospective study

BACKGROUND

It is debatable whether rhinoplasty is necessary during a primary operation for cleft lip. However, many surgeons believe that rhinoplasty should be performed simultaneously for severe deformities. We investigated whether alveolar cleft severity is involved in nasal deformity.

METHODS

Forty-three patients were assessed for alveolar cleft severity using maxillary plaster models prepared during primary cheiloplasty. We conducted morphological assessments of nasal deformities using three-dimensional photogrammetry. Patients were divided into two groups according to alveolar cleft severity: group A, overlap of the alveolar segments; group B, nonoverlap of the alveolar segments. Nasal asymmetry was assessed by measuring distances between landmarks around the nostrils and the columellar angle. These measurements were compared between the groups. The correlations between the columellar angle and the ratios of the five cleft side/non-cleft side distances and the correlation of each ratio were analyzed.

RESULTS

Groups A and B included 21 and 22 patients, respectively. Group A demonstrated superior deviation of the alar base on the non-cleft side than that of the alar base on the cleft side (p < 0.05). No other statistically significant differences were observed. Group A had more severe nasal deformity. Columellar angle and nostril base width demonstrated correlation.

CONCLUSION

In an uncorrected, unoperated unilateral cleft lip nasal deformity, alar base deformity is affected by deformity of the alveolar segments.

Longitudinal Follow-up of Individuals With Cleft Lip Using Three-Dimensional Stereophotogrammetry

The usefulness of three-dimensional (3D) stereophotogrammetry for treating cleft lip (CL) has been well documented. However, there are only a few reliable anthropometric analyses in infants with CL because at this age they cannot assume a resting facial position. Since 2014, we have used a handheld 3D imaging system in the operating room to obtain optimal images of infants with CL and palate under general anesthesia. Currently, 168 infants with a unilateral cleft, 50 infants with bilateral clefts, and 47 infants with an isolated cleft palate are being followed up in this way for a maximum of 30 months. Most patients ≥3 years of age are cooperative and allow staff to obtain 3D images without sedation. We plan to follow them until adulthood, obtaining 3D images at every intervention. Each year, >150 infants can be added to this ongoing longitudinal study. Using an archive of these digital images, various retrospective studies can be attempted in the future, which include comparisons of the long-term outcomes of various surgical techniques and interventions at different time intervals. This is the first 2-year preliminary report of a 20-year longitudinal study.

Evaluation of a portable low-budget three-dimensional stereophotogrammetry system for nasal analysis

BACKGROUND

Three-dimensional (3D) photogrammetry has reached high standards and accuracy but is mainly conducted with stationary and expensive systems. The purpose of this study was to evaluate the accuracy of a low-budget portable system with special regard to the gracile and challenging nasal region.

MATERIAL AND METHODS

3D models of the perinasal area were acquired by impression-taking and the scanning of the generated plaster models (3Shape D500) or with a portable low-budget 3D stereophotogrammetry (FUEL3D^® SCANIFY^®) system. Four examiners analysed defined landmarks of the generated Standard Tessellation Language files with regard to accuracy and interobserver reliability by using 3dMDvultus™ software. A semi-automatic 3D best-fit analysis of both models was performed by using Geomagic^® and the Root Mean Squared (RMS) errors were calculated.

RESULTS

41 volunteers were included, with 22 perinasal and perioral landmarks, 15 3D distances and eight 3D angles being analysed per data set. In a point-based analysis the mean spreads were partially smaller in the plaster model scans. Most measurements showed very high (>0.8) to excellent (>0.9) intraclass correlation coefficients, the lowest being found for columella length (0.686) and left nostril width (0.636). Overall, the mean RMS error between the superimposed surfaces was 0.89 ± 0.22 mm in the best-fit analysis.

CONCLUSIONS

The corresponding software program was operator-friendly. The findings indicate that the analysed, affordable and portable system is a feasible solution for 3D image acquisition with comparable accuracy reported in the literature. Further studies will analyse the feasibility in neonates.

Three-Dimensional Soft Tissue Nasal Changes After Nasoalveolar Molding and Primary Cheilorhinoplasty in Infants With Unilateral Cleft Lip and Palate

OBJECTIVE

To quantify 3-dimensional (3D) nasal changes in infants with unilateral cleft lip with or without cleft palate (UCL±P) treated by nasoalveolar molding (NAM) and cheilorhinoplasty and compare to noncleft controls.

DESIGN

Retrospective case series of infants treated with NAM and primary cheilorhinoplasty between September, 2012 and July, 2016. Infants were included if they had digital stereophotogrammetric records at initial presentation (T1), completion of NAM (T2), and following primary cheilorhinoplasty (T3). Images were oriented in 3dMD Vultus software, and 16 nasolabial points identified.

PATIENTS

Twenty consecutively treated infants with UCL±P.

INTERVENTIONS

Nasoalveolar molding and primary cheilorhinoplasty.

MAIN OUTCOME MEASURES

Anthropometric measures of nasal symmetry and morphology were compared in the treatment group between time points using paired Student t tests. Postsurgical nasal morphology was compared to noncleft controls.

RESULTS

Nasal tip protrusion increased, and at T3 was 2.64 mm greater than noncleft controls. Nasal base width decreased on the cleft side by 4.01 mm after NAM and by 6.73 mm after cheilorhinoplasty. Columellar length of the noncleft to cleft side decreased from 2:1 to 1:1 following NAM. Significant improvements in subnasale, columella, and nasal tip deviations from midsagittal plane were observed. Treatment improved symmetry of the alar morphology angle and the nasal base-columella angle between cleft and noncleft sides.

CONCLUSIONS

Three-dimensional analysis of UCL±P patients demonstrated significant improvements in nasal projection, columella length, nasal symmetry, and nasal width. Compared to noncleft controls, nasal form was generally corrected, with overcorrection of nasal tip projection, columella angle, and outer nasal widths.

Nasolabial Growth in Individuals With Unilateral Cleft Lip and Palate: A Preliminary Study of Longitudinal Observation Using Three-Dimensional Stereophotogrammetry

There are limited numbers of studies comparing the preoperative and postoperative facial features of infants with unilateral cleft lip and palate (UCLP) using three-dimensional (3D) stereophotogrammetry. The authors attempted an anthropometric analysis of nasolabial asymmetry 1 year after primary lip repair using a handheld 3D imaging system. Five different nasolabial dimensions in 24 infants with UCLP were measured using 3D images captured during primary lip repair and again, 1 year after the repair. The nasal and upper-lip elements of the cleft side were significantly changed after primary lip repair, and nasolabial asymmetry was anthropometrically improved. This is a preliminary longitudinal observation of nasolabial growth in individuals with UCLP using 3D stereophotogrammetric technique. The authors would like to follow these children until adulthood, capturing 3D images at every intervention.

Three-dimensional facial analysis of Chinese children with repaired unilateral cleft lip and palate

We analyzed the facial features of Chinese children with repaired unilateral cleft lip and palate (UCLP) and compared them with a normal control group using a three-dimensional (3D) stereophotogrammetry camera. This cross-sectional study examined 3D measurements of the facial surfaces of 20 Chinese children with repaired UCLP and 40 unaffected Chinese children aged 7 to 12 years old, which were captured using the VECTRA 3D five-pod photosystem and analyzed using Mirror software. Twenty-five variables and two ratios were compared between both groups using independent t-test. Intra- and inter-observer reliability was determined using ten randomly selected images and analyzed using intra-class correlation coefficient test (ICC). The level of significance was set at p < 0.0018. Intra- and inter-observers’ reliability was considered fair to excellent with an ICC value ranging from 0.54 to 0.99. Statistically significant differences (p < 0.0018) were found mainly in the nasolabial region. The cleft group exhibited wider alar base root width, flattened nose and broader nostril floor width on the cleft side. They tended to have shorter upper lip length and thinner upper vermillion thickness. Faces of Chinese children with repaired UCLP displayed meaningful differences when compared to the normal group especially in the nasolabial regions.