Histo-morphologic characteristics of intra-osseous implants of WE43 Mg alloys with and without heat treatment in an in vivo cranial bone sheep model

Titanium versus plasma electrolytic oxidation surface-modified magnesium miniplates in a forehead secondary fracture healing model in sheep

Magnesium as a biodegradable material offers promising results in recent studies of different maxillo-facial fracture models. To overcome adverse effects caused by the fast corrosion of pure magnesium in fluid surroundings, various alloys, and surface modifications are tested in animal models. In specified cases, magnesium screws already appeared for clinical use in maxillofacial surgery. The present study aims to compare the bone healing outcome in a non-load-bearing fracture scenario of the forehead in sheep when fixed with standard-sized WE43 magnesium fixation plates and screws with plasma electrolytic oxidation (PEO) surface modification in contrast to titanium osteosynthesis. Surgery was performed on 24 merino mix sheep. The plates and screws were explanted en-bloc with the surrounding tissue after four and twelve weeks. The outcome of bone healing was investigated with micro-computed tomography, histological, immunohistological, and fluorescence analysis. There was no significant difference between groups concerning the bone volume, bone volume/ total volume, and newly formed bone in volumetric and histological analysis at both times of investigation. The fluorescence analysis revealed a significantly lower signal in the magnesium group after one week, although there was no difference in the number of osteoclasts per mm2. The magnesium group had significantly fewer vessels per mm2 in the healing tissue. In conclusion, the non-inferiority of WE43-based magnesium implants with PEO surface modification was verified concerning fracture healing under non-load-bearing conditions in a defect model. STATEMENT OF SIGNIFICANCE: Titanium implants, the current gold standard of fracture fixation, can lead to adverse effects linked to the implant material and often require surgical removal. Therefore, degradable metals like the magnesium alloy WE43 with plasma electrolytic oxidation (PEO) surface modification gained interest. Yet, miniplates of this alloy with PEO surface modification have not been examined in a fracture defect model of the facial skeleton in a large animal model. This study shows, for the first time, the non-inferiority of magnesium miniplates compared to titanium miniplates. In radiological and histological analysis, bone healing was undisturbed. Magnesium miniplates can reduce the number of interventions for implant removal, thus reducing the risk for the patient and minimizing the costs.

The Influence of Extracellular Vesicles Secreted by Dural Cells on Osteoblasts

To explore the influence of extracellular vesicles secreted by dural cells (Dura-EVs) on osteoblasts. Our methodology involves assessing the effects of these EVs at concentrations of 50ug/ml, 100ug/ml, and 200ug/ml on osteoblasts proliferation, differentiation, migration, osteogenesis, and inhibition of apoptosis. We also treated a cranial defect model with injections of these Dura-EVs and monitored the healing rate of cranial defects. Tissue sections were analyzed using Hematoxylin and Eosin (H & E), Masson's trichrome, and immunofluorescence (IF) staining. Our results suggest that Dura-EVs can enhance osteoblasts proliferation, migration, differentiation, and osteogenesis in a dose-dependent manner in vitro. In vivo, Dura-EVs may promote the repair of skull defects. Dura-EVs have an important influence on osteoblasts, our findings shed light on a novel aspect of the dura mater's contribution to cranial osteogenesis.

WE43 and WE43-T5 Mg alloys screws tested in-vitro cellular adhesion and differentiation assay and in-vivo histomorphologic analysis in an ovine model

WE43 Mg alloy proved to be an ideal candidate for production of resorbable implants in both clinical and trial settings. In previous studies we tested biocompatibility and degradation properties of WE43 (as-cast) and artificially aged (WE43-T5) Mg alloys in a sheep model. Both alloys showed excellent biocompatibility with the as-cast, WE43, form showing increased degradability compared to the artificially aged, WE43-T5. In the present study, our group assessed the biological behavior and degradation pattern of the same alloys when implanted as endosteal implants in a sheep model. Twelve screws (3x15 mm) were evaluated, one screw per each composition was placed bi-cortically in the mandible of each animal with a titanium (2x12 mm) screw serving as an internal positive control. At 6 and 24 weeks histomorphological analysis was performed, at 6 weeks as cast, WE43, yielded a higher degradation rate, increased bone remodeling and osteolysis compared to the WE43-T5 alloy; however, at 24 weeks WE43-T5 showed higher degradation rate and increased bone remodeling than as-cast. In vitro assay of cell growth, adhesion and differentiation was also conducted to investigate possible mechanisms underlying the behavior expressed from the alloys in vivo. In conclusion WE43-T5 indicated bone/implant interaction properties that makes it more suitable for fabrication of endosteal bone screws.

Bioabsorbable Osteofixation Materials for Maxillofacial Bone Surgery: A Review on Polymers and Magnesium-Based Materials

Clinical application of osteofixation materials is essential in performing maxillofacial surgeries requiring rigid fixation of bone such as trauma surgery, orthognathic surgery, and skeletal reconstruction. In addition to the use of titanium plates and screws, clinical applications and attempts using bioabsorbable materials for osteofixation surgery are increasing with demands to avoid secondary surgery for the removal of plates and screws. Synthetic polymeric plates and screws were developed, reaching satisfactory physical properties comparable to those made with titanium. Although these polymeric materials are actively used in clinical practice, there remain some limitations to be improved. Due to questionable physical strength and cumbersome molding procedures, interests in resorbable metal materials for osteofixation emerged. Magnesium (Mg) gained attention again in the last decade as a new metallic alternative, and numerous animal studies to evaluate the possibility of clinical application of Mg-based materials are being conducted. Thanks to these researches and studies, vascular application of Mg-based biomaterials was successful; however, further studies are required for the clinical application of Mg-based biomaterials for osteofixation, especially in the facial skeleton. The review provides an overview of bioabsorbable osteofixation materials in maxillofacial bone surgery from polymer to Mg.

Comparison of a resorbable magnesium implant in small and large growing-animal models

Fracture treatment in children needs new implant materials to overcome disadvantages associated with removal surgery. Magnesium-based implants constitute a biocompatible and bioresorbable alternative. In adults and especially in children, implant safety needs to be evaluated. In children the bone turnover rate is higher and implant material might influence growth capacity, and the long-term effect of accumulated particles or ions is more critical due to the host's prolonged post-surgery lifespan. In this study we aimed to investigate the degradation behavior of ZX00 (Mg-0.45Zn-0.45Ca; in wt.%) in a small and a large animal model to find out whether there is a difference between the two models (i) in degradation rate and (ii) in bone formation and in-growth. Our results 6, 12 and 24 weeks after ZX00 implantation showed no negative effects on bone formation and in-growth, and no adverse effects such as fibrotic or sclerotic encapsulation. The degradation rate did not significantly differ between the two growing-animal models, and both showed slow and homogeneous degradation performance. Our conclusion is that small animal models may be sufficient to investigate degradation rates and provide preliminary evidence on bone formation and in-growth of implant materials in a growing-animal model.

STATEMENT OF SIGNIFICANCE

The safety of implant material is of the utmost importance, especially in children, who have enhanced bone turnover, more growth capacity and longer postoperative lifespans. Magnesium (Mg)-based implants have long been of great interest in pediatric orthopedic and trauma surgery, due to their good biocompatibility, biodegradability and biomechanics. In the study documented in this manuscript we investigated Mg-Zn-Ca implant material without rare-earth elements, and compared its outcome in a small and a large growing-animal model. In both models we observed bone formation and in-growth which featured no adverse effects such as fibrotic or sclerotic encapsulation, and slow homogeneous degradation performance of the Mg-based implant material.